What Causes the Failure of the Auto Hold Function?

What brand is WANLI tire?

WANLI is Wanli Tire, a tire brand under Guangzhou South China Rubber & Tire Co., Ltd. Wanli Tire was introduced in 1988, and the group's products cover new energy bus tires, light truck semi-steel radial tires, and heavy truck steel radial tires, among others. Wanli Tire has quality management system certification for the manufacturing industry. Guangzhou South China Rubber & Tire Co., Ltd. is a large state-owned enterprise that introduced professional technology to produce radial tires. It offers a wide range of product series, including passenger car tires, snow tires, urban SUV and off-road tires, and commercial load-bearing tires, with over 1,200 specifications and tread patterns. Different tire tread patterns have varying performance characteristics and usage focuses. Tire selection tips: Choose new tires of the same size as the original ones. Tires for aggressive driving wear out faster, so opt for durable tires. For national highways or expressways: Braking distance at high speeds is crucial for maximum safety. Select tires with the shortest braking distances on both dry and wet surfaces. For comfort during long trips, choose tires that provide a smooth ride (with minimal bumps and noise). For performance, prioritize high-performance tires. For city driving: Braking distance is essential to handle urban hazards like pedestrians crossing roads. Choose tires with the shortest braking distances on dry and wet surfaces. For long mileage, tires undergo deformation and sliding when subjected to engine power or braking force. Sliding and friction wear down the tread rubber, so select tires with longer mileage life. For fuel efficiency, tires with lower rolling resistance significantly reduce fuel consumption. For VIKING tires in daily use, pay attention to the following: Regularly inspect the tire surface for cracks, deformations, or other defects. As tires wear, the tread grooves gradually become shallow. Worn-out treads lose their water drainage and anti-skid functions, drastically reducing the vehicle's performance. Small cracks can lead to blowouts at high speeds. Additionally, promptly remove stones stuck in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that degrade rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool overheated tires. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear from dragging against the road.

2

5

Share

Why Are the Wheel Rims Different for the Same Car Model?

Even for the same brand and series of wheel rims, there can be some differences in the design of the spokes and the edges of the rim. These design variations are primarily due to differences in the size and specifications of the wheel rims. Below is some relevant information about wheel rims: 1. Introduction: The wheel rim is the rotating part of the wheel that connects the inner contour of the tire to the hub via pillars, i.e., the metal component at the center that supports the tire and is mounted on the axle. It is also known as the wheel, rim, or hubcap. 2. Types of Wheel Rims: Depending on the characteristics and requirements of different vehicle models, the surface treatment process for wheel rims can vary, generally categorized into two types: painted and chrome-plated. For ordinary vehicle models, less emphasis is placed on the appearance of the wheel rims, with good heat dissipation being a basic requirement. The process typically involves painting, where the rim is first sprayed and then baked, making it cost-effective, visually appealing, and durable. Even when the vehicle is scrapped, the color of the wheel rim remains unchanged.

10

0

Share

What are the benefits of a 360-degree panoramic camera?

360-degree panoramic reversing cameras help drivers understand blind spots around the vehicle, enabling more intuitive and safer parking. Below are some maintenance precautions for the imaging system: 1. Replace with suitable antifreeze: Some car owners prefer using tap water instead of antifreeze in summer, which is highly inadvisable. As temperatures drop in autumn, failing to replace it with automotive-specific antifreeze may affect the cooling system's normal operation if sudden cold weather occurs. Therefore, if tap water is used, it should be replaced immediately. 2. Intake system and battery: In autumn, check the valves for carbon buildup and visit a service station for inspection and repairs if necessary. During this season, the battery terminals are particularly prone to issues. If green oxide deposits are found on the terminals, rinse them off with boiling water, as they can lead to insufficient generator output, battery discharge, or even complete failure in severe cases, preventing the car from starting. 3. Frequent brake system checks: Ensure the brake fluid level is adequate and top up or replace it as needed. Regularly inspect the braking system for weakening, pulling to one side, or changes in pedal resistance. If necessary, clean the entire brake system's piping. Also, check the front windshield defroster function. As autumn brings cooler temperatures, frost may form. Ensure the defroster vents under the windshield are functioning properly and providing sufficient heat. Address any issues promptly.

19

1

Share

What does 16*3.0 tire mean?

3.0 is the width of the tire. 16 is the diameter of the tire, which means it is a 16-inch tire. The tire specification 3.00-10 indicates a diameter of 30 cm and 10 layers of thickness. The 3.00-10 imperial specification refers to a 3.00 cross-section width: 3.00X25.4, which is 76.2 mm in cross-section width, and a 10-inch inner diameter. The hyphen (-) indicates a bias-ply tire. Example: If a motorcycle tire specification is 205, 65, R17, 92V, here is the detailed explanation of its meaning: 1. 205: The 205 refers to the width of the motorcycle tire, which is 205 mm. 2. 65: The 65 refers to the aspect ratio, meaning the sidewall height is 65% of the tire height. 3. R17: The R indicates a radial tire, and 17 is the rim diameter in inches. 4. 92V: The 92 refers to the load index, which means 92 multiplied by 4, indicating it can withstand a pressure of 368 kg. The V refers to the speed rating, which can reach up to 240 km/h.

6

4

Share

Buick Verano Tire Specifications

Buick Verano tire specifications are 205/55R16. The first number 205 indicates the tire width is 205MM, 55 represents the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, the letter R stands for radial tire, and 16 indicates the rim diameter is 16 inches. The Buick Verano has a top speed of 210km/h and accelerates from 0-100km/h in 7.7 seconds. In addition to the specifications, the following common data is also marked on the tires: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specifications: Indicates the rim specifications compatible with the tire for practical use, such as "Standard Rim 5.00F".

9

5

Share

Can Modified Laser Headlights Pass the Annual Inspection?

After modifying a vehicle, it must be registered with the vehicle management office to pass the annual inspection. Below are the relevant details about the annual inspection: 1. Conditions: Vehicles whose condition does not match the records on the driving license or registration file, or whose license plates or driving licenses are damaged, incomplete, illegible, or self-made. 2. Notes: The exterior of the vehicle cannot be modified. The color of the glass sun film or explosion-proof film cannot be too dark (items inside the vehicle must be clearly visible from one meter away; mainly applies to vans and trucks, but not to small cars with fewer than 5 seats). Vans and trucks must have enlarged rear license plates, and the number of spring leaf plates cannot be increased or decreased. The number of seats in a van cannot be altered, and a fire extinguisher is required. The cargo compartment of a box truck cannot be modified (no side doors, no roof openings, no tailgate additions). The size of the tires cannot be changed, and the tread patterns of tires on the same axle must be consistent. Vehicles with unresolved traffic violations or those impounded by the court cannot undergo the annual inspection.

20

0

Share

What Causes the Failure of the Auto Hold Function?

What brand is WANLI tire?

Why Are the Wheel Rims Different for the Same Car Model?

What are the benefits of a 360-degree panoramic camera?

What does 16*3.0 tire mean?

Buick Verano Tire Specifications

Can Modified Laser Headlights Pass the Annual Inspection?

What are the differences between cornering lights and adaptive headlights?

What Causes a Decrease in Vehicle Power?

Can a Flood-Damaged Car Be Driven After Repair?

How to Reset the Maintenance Reminder on the New Santana?