What causes the failure of Dongfeng Honda's auto start-stop system?

3 Answers
DiJohnny
07/23/25 9:36pm
Dongfeng Honda auto start-stop failure reasons are as follows: Accidentally pressing the auto start-stop button: Generally, vehicles equipped with auto start-stop function have the system enabled by default. If it suddenly stops working, it might be due to accidentally pressing the auto start-stop button on the car, causing the system to shut down. Check if the system has been turned off. Start conditions not met: If the car is a manual transmission, the conditions for auto start-stop to activate are a bit more complex. When parking, the system will only activate after recognizing three actions: "shift to neutral, pull the handbrake, and release the clutch." Temperature not reached: The function will not activate under the following circumstances: the engine has not reached normal operating temperature, the auto air conditioning has not reached the preset temperature, the battery charge is insufficient, the steering wheel is turned after stopping, the vehicle is in emergency braking, or reversing.
Was this review help?
15
5
Share
DiJosie
08/10/25 5:18pm
I drive a Dongfeng Honda, and it's quite annoying when the auto start-stop system fails. At first, I thought the system was broken, but after checking myself, I realized it might be due to battery aging. After two or three years, the voltage drops, and the start-stop system automatically disables itself. Another common issue is abnormal engine or ambient temperature, such as extreme heat in summer or cold in winter, which causes the system to pause to protect the equipment. Also, if the seatbelt isn't fastened properly or the door isn't closed tightly, the start-stop function won't work. Sometimes, the dashboard shows a warning light—don't ignore this. You can check the settings button inside the car to see if the start-stop function was accidentally turned off. I recommend going to an authorized repair shop to read the fault codes. Replacing the battery in time can save fuel costs, so don't let small problems turn into big ones. Regular maintenance should include checking the battery's health to extend its lifespan.
Was this review help?
17
3
Share
Expand All
BradyLee
09/23/25 5:13am
As someone who frequently deals with similar issues, I've identified several key points regarding the failure of Dongfeng Honda's auto start-stop system. Low battery charge is the primary cause—the start-stop system relies on stable voltage, and older batteries may fail to support it, causing it to shut down. External factors such as high engine load when the air conditioning is running at full capacity can pause the system, or insufficient brake pedal pressure may prevent activation. Additionally, an uncentered steering wheel can interfere with the angle sensor. Outdated software may cause bugs, requiring a firmware update at the dealership, or dirty sensors may block signals. I recommend owners first observe driving conditions: avoid max AC in hot weather, warm up the engine in cold environments before starting, and avoid tampering with circuits without expertise—instead, have a professional technician inspect wiring to prevent unexpected failures. Regular maintenance can help prevent this issue.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

What does the L gear mean in the Cruze?

L stands for LOW, meaning low speed, typically used for uphill and downhill driving or slow-speed situations. Below is an introduction to the Cruze gear positions: 1. P (Parking) - Parking gear, starting gear: When the vehicle is parked and not in use, the gear is in this position, and the wheels are mechanically locked to prevent rolling. The vehicle must be completely stopped before engaging P gear; otherwise, the mechanical parts of the automatic transmission may be damaged. 2. R (Reverse) - Reverse gear: Used when reversing. Never force the gear into "R" before the vehicle has come to a complete stop, as this may severely damage the transmission. 3. N (Neutral) - Neutral gear: Used for temporary stops (e.g., at a red light). This position indicates neutral. To prevent the vehicle from rolling on a slope, always apply the brake. 4. D (Drive) - Drive gear: Used for normal road driving. 5. L (LOW) - Low-speed mode: Typically used for uphill and downhill driving or slow-speed situations.
15
0
Share

What Are the Causes of Cruze Body Module Failure?

Due to the use of dual-filament bulbs in the brake lights of vehicles like the Cruze, a sudden increase in current when the brake bulb fails can directly burn out the body control module. Other potential causes include failure to promptly replace a damaged brake light, failure to promptly replace a faulty trunk switch, or modified wiring, all of which may lead to the burning out of the chip in the body control module's computer board. Below is an introduction to the body module: Introduction: The Body Control Module (BCM) is a powerful control module designed to implement discrete control functions and manage various electrical appliances. Functions: The functions of the Body Control Module include: power window control, central door lock control, remote security, lighting system control, heated rearview mirror control, instrument panel backlight adjustment, and power distribution.
2
5
Share

Can the Cruze use 95 octane gasoline?

The Cruze cannot use 95 octane gasoline; it requires 92 octane gasoline, as recommended in the vehicle's official user manual. In addition to checking the suitable gasoline grade in the user manual, you can also find this information on the fuel tank cap, which will be clearly marked. Generally, the appropriate gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. For higher compression ratios, 98 octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the required gasoline grade, as engines with high compression ratios can also be tuned to use lower-octane gasoline. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline octane number, the higher the octane rating and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Cruze occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the current tank is used up. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles designed for lower octane gasoline, using higher octane gasoline will not cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher octane gasoline, using lower octane gasoline can cause engine knocking. The significantly lower octane rating lowers the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke. This resistance makes the engine run very unevenly. Mild knocking may only increase noise without obvious engine damage, but severe knocking indicates serious engine conditions. The vibrations not only affect driving stability but also cause abnormal wear on the pistons and cylinders, potentially leading to cylinder scoring in severe cases.
1
2
Share

How Many Liters of Brake Fluid Does a Cruze Need?

The Cruze requires brake fluid replacement every 30,000 kilometers, with a replacement quantity of 1 liter each time. Below is additional information: 1. Definition of Brake Fluid: Automotive brake fluid, also known as hydraulic brake fluid, is a liquid used in the hydraulic braking system of vehicles to transmit pressure. It is a crucial product related to traffic safety. Brake fluid is made from refined diesel distillates with the addition of thickeners and antioxidants. There are three types: mineral oil brake fluid, alcohol-based brake fluid, and synthetic brake fluid. 2. Brake Fluid Working Pressure: The working pressure of brake fluid is generally 2MPa, and can reach as high as 4~5MPa. All liquids have the characteristic of being incompressible. In a sealed container or a liquid-filled pipeline, when pressure is applied to the liquid, it is quickly and uniformly transmitted to all parts of the liquid. Hydraulic braking operates on this principle. After a certain period of use, brake fluid is prone to a decrease in boiling point, contamination, and varying degrees of oxidative deterioration.
10
3
Share

How to Turn on the Air Conditioning in a BYD Car?

To turn on the air conditioning in a BYD car, press the AC button inside the vehicle. Rotate the temperature knob clockwise to increase the air outlet temperature, and counterclockwise to decrease it. BYD is a Chinese automobile brand that offers a range of high, mid, and low-end series of fuel-powered cars, as well as dual-mode electric vehicles and pure electric vehicles. The BYD lineup includes models such as the BYD Han, BYD Tang, BYD Song, BYD Song PLUS, BYD Song Pro, BYD F3, Surui, Qin New Energy, Flyer, Surui, BYD S1, BYD M6, BYD e5, and more.
7
5
Share

Should the engine be turned off when refueling a car?

When refueling a car, the engine should be turned off. Gasoline is the fuel for internal combustion engines and is currently one of the most widely used light petroleum products in the world. The degree of gasoline evaporation in the carburetor has a significant impact on the engine's fuel consumption, startup, and acceleration. Gasoline possesses properties such as volatility, anti-knock quality, safety, and corrosiveness. Precautions for refueling: 1. It is not advisable to fill the fuel tank completely when driving in urban areas; 2. Do not wait until the fuel warning light comes on to refuel; 3. Do not make phone calls or use mobile phones while refueling; 4. Open flames are prohibited in gas stations; 5. Dangerous goods are not allowed; 6. Vehicles should enter the gas station at a slow speed before refueling and also exit slowly after refueling.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.