What causes the exclamation mark to light up in the Beidou Star?

1 Answers
DelBraxton
09/01/25 2:29am
The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cut-off system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or that the transmission lubricant is below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a brake system warning, primarily indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Abnormality: A horizontal line with parentheses and an exclamation mark below it. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily vehicle use, the fault lights displayed on the dashboard are divided into two different colors for alerts: yellow and red. Yellow indicates a fault in the corresponding system, but the issue is not very severe. Reduce speed and proceed to the nearest repair point to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over safely and seek professional assistance to prevent unforeseen dangers to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, the lights will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly to inspect the car and eliminate safety hazards.
Was this review help?
13
5
Share
More Forum Discussions

What is the battery model of the Tiguan?

The old Tiguan model uses a Varta battery with the model number 6QW60 (580) L and a voltage of 12V60AH; the new Tiguan model uses a Bosch battery with the model number L2400 and a voltage of 12V60AH. The working principle of the battery is to convert chemical energy into electrical energy. The replacement method is as follows: open the engine hood, locate the battery position, unscrew the fixing nuts, remove the battery, install the new battery, connect the positive and negative terminals correctly, and tighten the nuts. The Tiguan comes standard with ESP body stability system, EBD electronic brake force distribution, and ASR traction control. Some less common features such as EDS electronic differential lock, EPB electronic parking brake, automatic parking function, and TPR tire pressure monitoring system are also standard configurations of the Tiguan, demonstrating Volkswagen's strong emphasis on safety.
10
0
Share

How to Lock a BMW Car with the Key?

BMW cars now come with an automatic locking system, which allows the car to be locked without using the key. The automatic locking system is commonly referred to as the keyless entry system, meaning you don't need to take out the key to start the vehicle. Simply keep the key in your bag or pocket, press the button inside the car, or turn the ignition knob to start the engine. To prevent the key fob from running out of battery, BMW is equipped with a mechanical key. You can directly use the mechanical key to unlock the door by inserting it into the keyhole on the door handle. BMW is a German luxury car brand, with its model lineup including the i, X, Z, and pure numeric series (1, 2, 3, 4, 5, 6, 7, 8), as well as the M series, which is based on improvements to the existing models. BMW's headquarters is located in Munich, Bavaria, Germany, and the blue and white logo of BMW represents the colors of the Bavarian state flag.
1
1
Share

What size tires are suitable for 15-inch rims?

15-inch rims typically use 185mm wide tires, with a maximum width of 195mm possible. Wider tires can significantly improve braking performance and steering response. The rim, also known as the wheel hub, wheel ring, or simply the wheel, is the metal component that supports the tire and mounts onto the axle. It forms the rotating part of the wheel assembly connected by spokes to the central hub. Rims come in various types based on diameter, width, manufacturing method, and material. Depending on the characteristics and requirements of different vehicle models, rim surface treatments vary, primarily categorized into painted and chrome-plated finishes. Standard vehicle rims prioritize functionality over aesthetics, with good heat dissipation being a fundamental requirement. These are typically finished with a painted treatment—sprayed and then baked—which is cost-effective, offers vibrant colors, and maintains durability over time, often outlasting the vehicle itself without fading.
2
2
Share

Where is the engine number of Hyundai Verna located?

Hyundai Verna's engine number is located under the front passenger seat, at the lower left side of the engine front end, and on the side plane where the cylinder block connects with the transmission housing. The engine number is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and engine attributes, serving to represent information such as the manufacturer, specifications, performance, characteristics, craftsmanship, purpose, and production batch of the engine. Hyundai Verna offers two engine configurations: 1.4L and 1.6L, both from Hyundai's new engine series, surpassing the power levels of same-class and same-displacement models. As Hyundai's core strategic model in the small car segment, Hyundai Verna is an A0-class car independently developed by Hyundai specifically for the Chinese market. It was jointly designed and developed by Hyundai's Nanyang R&D Center, North American R&D Center, and European R&D Center. The Verna extensively employs smooth contour lines in its exterior design, paired with a stylish front fascia, creating a cutting-edge and dynamic visual appeal.
19
1
Share

What kind of engine oil is suitable for the Boyue?

Geely Boyue is suitable for Shell semi-synthetic engine oil with a viscosity grade of 5W-40. Below is an introduction about engine oil: 1. Currently, Geely Boyue is equipped with JLD-4G20 and JLE-4G18TD engines. For the JLD-4G20 engine, the recommended engine oil is SAE5W-30 with an API quality grade of SL or higher. For the JLE-4G18TD engine, the recommended engine oil is SAE5W-40 with an API quality grade of SN or higher. 2. In cold weather, using SAE10W-30 or higher viscosity engine oil may make the engine difficult to start. Therefore, it is recommended to use SAE0W20, 5W20, or 5W30 engine oil. 3. When selecting engine oil, strictly follow the engine oil grade specified in the vehicle's user manual. If the same grade is not available, you can use a higher grade, but never use a lower grade as a substitute.
11
1
Share

What type of engine oil is suitable for the 2018 Vision?

The 2018 Vision can use engine oil with an API quality grade of SL or higher, specifically the 5W-30 model. Alternatively, 10W-40 or higher grades are also suitable. Here are more details about engine oil: 1. Based on the difference in base oils, automotive engine oils can be categorized into mineral oil and synthetic oil, with synthetic oil further divided into semi-synthetic and full-synthetic oils. Full-synthetic oil represents the highest grade. Compared to mineral and semi-synthetic oils, synthetic oils can withstand higher temperatures and have a longer service life. Under the same working conditions, synthetic oils can achieve the required performance with lower viscosity, whereas mineral oils require higher viscosity to meet the same standards. 2. The three types of engine oils have different service intervals: mineral oil should be replaced approximately every 3 months or 5,000 kilometers; semi-synthetic oil every 8 months or 7,000 kilometers; and full-synthetic oil is recommended to be replaced every year or 10,000 kilometers. 3. Although full-synthetic oil offers superior performance, it is not suitable for all vehicles. Before selecting an engine oil, it's important to consider the engine type and the region where the car is primarily used.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.