What Causes the Engine Warning Light to Illuminate?

How many kilometers can a full tank of gas last for the Honda Fit?

If driving on the highway, a full tank of gas can last for 600 kilometers, while in urban areas, it can last for 500 kilometers. Here are some extended details: 1. Body Dimensions: The Fit is a compact car under Honda, with a length of 4109 millimeters, width of 1694 millimeters, height of 1537 millimeters, and a wheelbase of 2530 millimeters. 2. Powertrain: The Fit is equipped with a 1.5-liter naturally aspirated engine across all models, which is part of Honda's Earth Dreams series. The 1.5-liter naturally aspirated engine in the Fit has the model code L15BU, with a maximum power output of 96 kW and a maximum torque of 155 Nm. The engine reaches its maximum power at 6600 rpm and its maximum torque at 4600 rpm. This engine features i-VTEC technology and direct injection, and it uses an aluminum alloy cylinder head and block.

9

5

Share

What happens if the owner doesn't move the car with one-click car moving service?

If the owner doesn't move the car with one-click car moving service, they will be notified by traffic police. Here is relevant information: 1. Penalty issue: The one-click car moving service does not penalize the owner, and the reminded owner naturally will not receive demerit points. However, for owners using the one-click car moving service, if found to have maliciously submitted car moving applications, they will face punishment of being blacklisted upon verification, and the legal responsibilities arising from this will be borne by the applicant. 2. Precautions: Use the one-click car moving service when necessary, and do not use it maliciously. To avoid pranks, the traffic management department 12123 allows a maximum of only five one-click car moving service applications per month. If the owner notified to move the car confirms that their car is parked normally and does not affect others' driving, they can also initiate a complaint request, and the system administrator will review the complaint information. If the owner does not come to move the car, they can be urged through the software, and the system will notify the owner and inquire through customer service.

10

1

Share

Do You Need to Press the Brake When Turning Off an Automatic Transmission Car?

You need to press the brake when turning off an automatic transmission car. Here is more expanded information: 1. Handling method: After the vehicle is stationary, shift the gear to P or N position to turn off the engine. If parking on a slope, first shift the gear to N position, then press the brake, pull the handbrake, wait for the vehicle to come to a complete stop, shift the gear to P, release the foot brake, and finally turn off the engine. 2. Selection requirements: When an automatic transmission car needs to temporarily stop at an intersection or due to traffic congestion, different operation methods should be adopted according to the specific situation. When waiting for a traffic signal or stopping for a long time with the gear lever in D position, it is best to use both the foot brake and handbrake simultaneously to prevent accidents caused by slight relaxation of the foot brake. Automatic transmission cars consume more fuel than manual transmission cars of the same model, but the biggest advantage of automatic transmission vehicles is convenience, especially in traffic jams.

17

4

Share

What is the function of the brake pedal?

The function of the brake pedal is to slow down or stop the vehicle. Below is an extended introduction about the brake pedal: 1. Prohibited scenarios: (1) Small vehicles descending long slopes. When small passenger vehicles descend long slopes, it is recommended to use lower gears and engine braking to achieve deceleration, avoiding the use of the brake pedal as much as possible. (2) Large vehicles descending long slopes. For large vehicles or heavily loaded vehicles descending long slopes, remember not to press the brake pedal continuously; engine braking must be used for deceleration. 2. Pedal position: The brake pedal is commonly referred to as the 'brake.' There is a small pedal connected to the brake lever above the brake, hence it is also called the 'brake pedal.' There is also a small pedal on the clutch, known as the clutch pedal. The clutch is on the left, and the brake is on the right (aligned with the accelerator, with the accelerator on the right). 3. Working principle: A wheel or disc is fixed on the high-speed shaft of the machine, and a corresponding brake shoe, band, or disc is installed on the machine base. Under external force, it generates braking torque.

1

Share

How to make a left turn when the left-turn lane is under construction?

When the left-turn lane is under construction, you can use the straight lane to make a left turn when the left-turn signal is green and the straight signal is red. Below is extended information about left turns: 1. Precautions: (1) When preparing to make a left turn, you should enter the left-turn lane within the dashed line area of the lane marking. (2) When making a left turn, you should steer the vehicle toward the left side of the road (or the left-turn waiting area) in advance and observe through the rearview mirror or by turning your head. (3) Yield. Vehicles entering the roundabout should yield to vehicles already inside the intersection. 2. Traffic regulations: Article 50 of the "Traffic Safety Implementation Regulations" states: At intersections with marked directional lanes, vehicles must enter the appropriate directional lane based on their intended direction of travel. According to Article 90 of the "Traffic Law", violating this rule constitutes a traffic offense punishable by a 200 yuan fine and 2 penalty points. There may be slight variations across different regions, so please refer to local traffic regulations for specific enforcement standards.

8

5

Share

How to Determine When to Replace Automatic Transmission Spark Plugs?

Spark plug damage may manifest in the following situations: difficulty starting the engine, reduced power, excessive exhaust emissions, and increased fuel consumption. Steps for replacing spark plugs: Open the engine hood, lift the plastic engine cover, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris such as leaves or dust, and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it for a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires according to the firing order, then secure the cover. Spark plug replacement interval: Under normal maintenance conditions, replace them every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the owner's manual. Reference maintenance standards: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.

14

3

Share

What Causes the Engine Warning Light to Illuminate?

How many kilometers can a full tank of gas last for the Honda Fit?

What happens if the owner doesn't move the car with one-click car moving service?

Do You Need to Press the Brake When Turning Off an Automatic Transmission Car?

What is the function of the brake pedal?

How to make a left turn when the left-turn lane is under construction?

How to Determine When to Replace Automatic Transmission Spark Plugs?

Are there right-hand drive cars in China?

How many kilometers should the spark plugs of the Volkswagen Tharu be replaced?

What is VVT-i?

What to Do When the Car Overheats While Driving?