···
Log in / Register

What causes the engine vibration in the Tayron?

4 Answers
McTheo
07/29/25 9:41pm

The Tayron is equipped with a direct injection engine, which tends to exhibit more noticeable vibration compared to naturally aspirated engines. If the vibration is steady and rhythmic, it is considered normal. However, if you observe a significant increase in vibration or persistent symptoms, it is advisable to inspect and repair the vehicle. Common causes of engine vibration include engine misfire, deterioration or loosening of engine mounts, carbon buildup, and fuel system malfunctions. The Tayron is a mid-size SUV under the Volkswagen brand, with dimensions of 4589mm in length, 1860mm in width, and 1660mm in height, and a wheelbase of 2731mm. The Tayron lineup features three engine options: a 1.4-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine.

Was this review help?
9
0
Share
StElliot
08/15/25 8:58pm

The engine shaking issue with the Tayron is quite common in my experience, mostly due to ignition system failures. When spark plugs are worn or damaged and cannot properly ignite the air-fuel mixture in the cylinders, the engine will noticeably shake at idle, especially during cold starts. Aging ignition coils with insufficient voltage also cause similar problems, affecting driving comfort and increasing fuel consumption. The checking method is simple: in park mode with neutral gear, feel the shaking intensity. If significant, it's recommended to immediately replace the spark plugs or coils. DIY operation is feasible but prone to errors for beginners, so it's best to seek professional repair. Prevention is key. I suggest replacing spark plugs every 40,000 to 60,000 kilometers, using high-quality gasoline to reduce carbon deposits, and conducting regular inspections to ensure system stability, safeguarding driving safety and engine lifespan.

Was this review help?
19
1
Share
Expand All
JaxsonLee
10/17/25 5:14am

Engine shaking is quite annoying. I often encounter this issue when driving my Tayron. It's usually caused by fuel system problems, such as clogged fuel injectors or insufficient fuel pump pressure. Using low-quality gasoline with many impurities can lead to uneven fuel injection, resulting in shaking, which becomes more noticeable during acceleration or uphill driving. Cleaning the fuel injectors or replacing the fuel filter can solve the problem. Don't ignore minor issues, as prolonged neglect can damage the engine. I always insist on using high-grade fuel from reputable gas stations to reduce the frequency of faults. For daily maintenance, simply spray some cleaner and have a mechanic regularly inspect the fuel system to keep it running smoothly and avoid recurring issues.

Was this review help?
10
5
Share
Expand All
MasonMarie
11/30/25 5:57am

Common causes of engine shaking in the Tayron include mechanical component damage, such as aging and loss of elasticity in engine mounts, which weakens damping and transmits vibrations to the body, making shaking noticeable especially during startup or rapid acceleration. Replacing with new engine mounts can effectively alleviate this issue. Severe carbon buildup in the cylinders may also lead to incomplete combustion, resulting in shaking. Early cleaning is important. During diagnosis, try shifting to neutral to identify the source. Regular maintenance and smooth driving are key to prevention, ensuring vehicle health.

Was this review help?
14
0
Share
Expand All
More Forum Discussions

Is the Audi A4L a domestic car or a joint venture car?

Audi A4L is a joint venture car, which belongs to the joint venture between FAW-Volkswagen and Audi AG of Germany. Taking the 2020 Audi A4L as an example, it is a mid-size car. The body dimensions are: length 4858mm, width 1847mm, height 1439mm, wheelbase 2908mm, minimum ground clearance 118mm, and body weight 1610kg. The 2020 Audi A4L is equipped with five-link independent suspension both in the front and rear, a 2.0T turbocharged engine with a maximum horsepower of 150ps, a maximum torque of 270nm, a maximum power of 110kw, and is matched with a 7-speed dual-clutch transmission.
15
3
Share

How to forcibly release the electronic parking brake on the Besturn X80?

The method to forcibly release the electronic parking brake on the Besturn X80: 1. First, start the Besturn X80 with the key, then press the brake pedal while holding the electronic handbrake for about five seconds, and then pull up the electronic handbrake for another five seconds. The electronic parking brake will then be forcibly released. 2. If the issue persists, it is necessary to contact a repair service to tow the vehicle to the workshop for software modification or replacement of the electronic parking control unit. Introduction to the electronic parking brake system: The electronic parking brake system (EPB: Electrical Park Brake) integrates the temporary braking function during driving with the long-term braking function after parking, and it uses electronic control to achieve parking braking technology.
4
2
Share

Which Tiguan L model comes with a particulate filter?

Tiguan L is equipped with a particulate filter. There are currently 6 available Tiguan L models, all of which come with particulate filters to meet China's National VI emission standards. A particulate filter is a ceramic filter installed in the diesel engine's emission system that captures particulate matter before it enters the atmosphere. It can reduce soot emissions from diesel engines by over 90%, and the captured particulate matter is subsequently burned off during vehicle operation. Working principle of particulate filter: The diesel particulate filter is coated with platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the particulate filter through a dedicated pipe. After passing through its densely arranged bag-type filter, the carbon particles are adsorbed onto the filter made of metal fiber felt. When the accumulated particles reach a certain level, the burner at the end automatically ignites to burn off the adsorbed carbon particles, converting them into harmless carbon dioxide. To check whether a Tiguan L has a particulate filter, you can use these 3 methods: Check the and to see if there's a particulate filter function. Additionally, carefully examine the fault codes in the manual to see if there's a "particulate filter" warning light indicator; Check the label on the oil filler cap. If it clearly specifies 0W-20 grade oil, it indicates the presence of a particulate filter; Look behind the three-way catalytic converter to see if there's an additional cylindrical section on the exhaust pipe. If present, that's the particulate filter.
12
4
Share

Is MG a Domestic or Joint Venture Car Brand?

MG is a domestic car brand. Here are specific details about MG: 1. MG, short for Morris Garages, is a British-origin automobile brand founded in 1924 by William Morris. 2. MG is renowned for producing the famous MG series of convertible sports cars, celebrated for their unique design, fine craftsmanship, and excellent performance. 3. On July 22, 2005, Nanjing Automobile Group Co., Ltd. successfully acquired British MG Rover and its engine production division, forming Nanjing MG Automobile Co., Ltd. after the merger. 4. In April 2007, SAIC Motor Corporation Limited (SAIC Group) fully acquired Nanjing Automobile Group, thereby becoming the new owner of the MG brand.
6
2
Share

How to adjust the suspension stiffness of Mercedes-Benz GLC260?

Suspension refers to all the force-transmitting connection devices between the car frame and the axle or wheels, which directly affects the comfort and handling of the vehicle. Here are the methods to adjust the suspension stiffness of Mercedes-Benz GLC260: 1. Switch between the sport mode and comfort (economy) mode of the Mercedes-Benz GLC. 2. At the junction of the dashboard and the central display screen, the suspension is automatically adjusted according to the driving mode of the car. In economy mode, the suspension is softer, while in sport mode, the suspension is stiffer. 2. Use the E mode to adjust the suspension of the Mercedes-Benz GLC. Compared to the C mode, the suspension can be softer in E mode.
4
4
Share

How to Replace the Cabin Air Filter in a Volvo S60?

The cabin air filter in a Volvo S60 is located inside the glove compartment on the front passenger side. If you need to replace the cabin air filter, follow these steps: 1. Remove the clips located in the front passenger side of the engine compartment and take out the sound insulation. Be careful not to damage the clips. 2. Remove the lower cover of the glove box. 3. Locate the fuse box inside, and after removing it, you will see the cover of the cabin air filter. 4. Open the clips on both sides of the cover and pull out the old cabin air filter. 5. After installing the new cabin air filter, reassemble everything by following the steps in reverse order.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.