What Causes the Engine to Sound Muffled and Have Weak Acceleration?

1 Answers
LaAlexis
07/29/25 4:20pm
This situation occurs due to carbon buildup in the cylinders, throttle body, spark plugs, intake ducts, and other areas. Poor functioning of the exhaust gas recirculation system, as well as faults in the air flow meter, intake manifold absolute pressure sensor, and throttle position sensor, can also lead to weak engine acceleration. Below are detailed explanations regarding the engine: 1. Automobile Engine: The automobile engine is the device that provides power to the vehicle, serving as the heart of the car. It determines the vehicle's power, fuel efficiency, stability, and environmental performance. Depending on the power source, automobile engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems, among others. 2. Advantages: Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines, which convert the chemical energy of fuel into the mechanical energy of piston movement to output power. Gasoline engines have high rotational speeds, are lightweight, produce less noise, are easier to start, and have lower manufacturing costs. Diesel engines have higher compression ratios, better thermal efficiency, and superior fuel economy and emission performance compared to gasoline engines.
Was this review help?
2
3
Share
More Forum Discussions

Does the Geely Xingrui have CarPlay?

Geely Xingrui does not have CarPlay. Here are the specific details about the Geely Xingrui: 1. Powertrain: The Xingrui is equipped with a Volvo Drive-E series 2.0TD engine paired with a 7DCT transmission, delivering a maximum power of 190 horsepower and a peak torque of 300 Nm. Benefiting from the CMA architecture, it features a MacPherson front suspension, an E-type multi-link independent rear frame, and a ZF DP-EPS power steering system. 2. Exterior: The front fascia adopts the new "Cosmic Echo Energy Ripple" grille design, with vertical waterfall-style grille trim, complemented by triple-pulse daytime running lights and sharp headlight clusters on both sides, significantly enhancing the Xingrui's sporty appeal and technological feel.
6
0
Share

Is It Correct to Take a Small Left Turn and a Large Right Turn?

It is incorrect. The proper method is to take a large left turn and a small right turn. 1. Large left turn: When making a left turn at an intersection, the turning radius should be larger. Continue driving straight until reaching the center of the intersection before starting to turn left. 2. Small right turn: To avoid interfering with straight-moving vehicles and reduce the probability of accidents, after making a right turn, move to the farthest right lane. If a lane change is needed, do so after completing the turn. The benefits of proper left and right turns are as follows: 1. Benefits of a large left turn: A: Wider field of vision, less distraction. B: Saves time during heavy traffic. 2. Benefits of a small right turn: A: Turning vehicles yield to straight-moving vehicles. B: Pay special attention to blind spots.
2
0
Share

How long does it take to fully charge the BYD Han at home with 220V electricity?

The BYD Han can be fully charged at home with 220V electricity in 11 hours. Below is relevant information about the BYD Han: 1. Exterior: The BYD Han DM is a mid-to-large-sized sedan under the BYD brand, with a wheelbase of 2920 mm, and dimensions of 4960 mm in length, 1910 mm in width, and 1495 mm in height. 2. Powertrain: The 2.0-liter turbocharged engine in the BYD Han DM delivers a maximum power of 141 kW and a maximum torque of 320 Nm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed dual-clutch transmission, which enhances the vehicle's transmission efficiency and shifting speed.
15
0
Share

Are New Energy Vehicle License Plates Subject to Traffic Restrictions?

New energy vehicles are generally not subject to traffic restrictions, but it is essential to check local regulations as policies may vary by region. For instance, some cities only exempt pure electric vehicles from restrictions, while other types of new energy vehicles, such as range-extended electric vehicles and plug-in hybrid electric vehicles, may still be subject to traffic restrictions. Additional relevant information is as follows: 1. If the second letter of the license plate is F, it indicates a plug-in hybrid electric vehicle, which is not a pure electric vehicle and falls under the category of restricted vehicles. 2. New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or conventional vehicle fuels with new onboard power devices), integrating advanced technologies in vehicle power control and drive systems, resulting in vehicles with advanced technical principles, new technologies, and innovative structures.
3
5
Share

What are the types of transmission fluid?

Transmission fluid types include dexron, dexronⅡ, dexronⅢ, and ATFF. The function of transmission fluid is to keep the shifting system clean, provide lubrication, ensure the normal operation of the transmission, and extend the lifespan of the transmission components. The role of the transmission: to change the gear ratio, expand the range of torque and speed changes of the driving wheels, adapt to frequently changing driving conditions, and allow the engine to operate under favorable working conditions. The hazards of not changing transmission fluid for a long time: 1. Damage to the transmission's shift control mechanism; 2. Abnormal wear of gears and clutch plates inside the transmission; 3. Affecting the normal operation of the transmission, leading to damage to the transmission valve body.
7
3
Share

Does a Non-Functioning High-Mount Stop Light Affect Annual Inspection?

High-mount stop light not working will definitely affect the vehicle inspection, as checking the brake lights involves verifying if all the vehicle's brake lights are functioning properly: 1. If you observe carefully, you'll notice a square or rectangular red brake light positioned higher in the middle at the rear of some new car models; 2. This light is technically called a high-mount stop light, generally positioned higher than the brake lights on both sides of the car's rear. The purpose of the high-mount stop light is to alert vehicles following behind, thereby helping to prevent rear-end collisions; 3. Vehicles without a high-mount stop light, especially low chassis cars and micro cars, may have their rear brake lights positioned too low and often lack sufficient brightness during braking. This makes it difficult for drivers of vehicles following behind, particularly those in higher chassis vehicles like trucks, coaches, and buses, to see clearly.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.