What Causes the Engine Noise in Buick Excelle?

Why does the car fail to start after two ignition attempts?

Here are the reasons why a vehicle may fail to start after two ignition attempts: 1. Weak battery: Symptoms: The starter motor begins to turn but lacks sufficient speed (i.e., weak power), and later only makes a clicking sound without turning. Low temperatures in winter or forgetting to turn off certain electrical devices can prevent the vehicle from starting, especially after prolonged short-distance, low-speed usage in winter, causing the battery voltage to drop below the rated value, making normal starting and operation impossible. 2. Fuel flow obstruction: Do not wait until the fuel is almost empty to refuel. Symptoms: No fuel pressure in the engine's fuel supply line. This situation often occurs on extremely cold mornings due to long-term contamination of the fuel lines. At very low temperatures, water and debris can mix and block the fuel lines, resulting in a failure to start. 3. Poor ignition system performance: Symptoms: On extremely cold days, due to low intake air temperature, fuel atomization in the cylinder is poor. If combined with insufficient ignition energy, this can lead to cylinder flooding, where excessive fuel accumulates in the cylinder, exceeding the ignition concentration limit and preventing the engine from starting.

18

5

Share

Does One-Button Start Require Self-Check?

It is best to perform self-check regularly for one-button start. The self-check method is as follows: Without pressing the brake, press the start switch once to power on the entire vehicle, press it again for self-check, and press it three times to turn off. More information about one-button start is as follows: 1. The one-button start device is part of a smart car, a button device that simplifies the ignition process and can also turn off the engine. Most cars are equipped with one-button start, allowing you to start or turn off the engine by simply pressing the button, eliminating the hassle of losing or searching for keys. During the ignition process, most require pressing the foot brake. 2. The one-button start function eliminates the need for a key to open the door, providing a unique technological experience designed for drivers with smart car one-button start tools.

1

4

Share

Should you use internal or external air circulation when turning on the car's air conditioning?

When turning on the car's air conditioning, it is recommended to use external air circulation. The air conditioning system has two circulation modes: internal and external. Below is relevant information about internal and external circulation: 1. Internal circulation means the air inside the vehicle is recirculated, where the air from the vents comes from inside the cabin, which is sealed off from the outside atmosphere. External circulation means outside air enters the cabin, with the vent air coming from outside, connecting the cabin to the external atmosphere in an unsealed manner. 2. Internal circulation only involves the blower circulating air within the car's interior. Since no outside air is involved, it offers advantages of fuel efficiency and faster cooling (or heating), but the drawback is poorer air quality refreshment inside the car. External circulation means the blower draws fresh air from outside into the cabin, with the advantage of maintaining better air quality inside, though cooling (or heating) is slightly slower and consumes more fuel.

7

4

Share

Are Front Shock Absorbers Left and Right Specific?

Front shock absorbers are indeed left and right specific, and they are usually marked with clear "L" and "R" indicators for differentiation. Besides their primary function of absorbing vibrations, front shock absorbers also serve as the mounting points for the vehicle's front anti-roll bar. If the left and right positions of the front shock absorbers are swapped, the mounting points for the anti-roll bar will also shift, leaving the left and right supports of the anti-roll bar with no place to attach. Here is more information about automotive shock absorbers: 1. When driving on uneven roads, although the suspension springs can filter out road vibrations, the springs themselves still oscillate. The shock absorbers are designed to control this spring oscillation. 2. If the shock absorbers are too soft, the vehicle body will bounce excessively. Conversely, if they are too stiff, they will create excessive resistance, hindering the proper functioning of the springs.

3

Share

How to operate the high-low beam alternation in Subject 3?

To perform the high-low beam alternation, first turn on the low beam. In most cars, the low beam is activated via a knob or button on the left side of the steering wheel. The high beam in most vehicles is operated using the lever on the left side of the steering wheel. Pushing the lever forward turns on the high beam. When you push the lever forward and release it, the lever automatically returns to its original position. Simply repeat the lever movement to alternate between high and low beams. Below is relevant information: 1. All cars are equipped with high beams and low beams, which are used under different circumstances. 2. High beams should not be used indiscriminately. Generally, avoid using high beams when driving on urban roads, as they can impair the vision of oncoming drivers. High beams should only be used on rural roads without streetlights or on highways. Highways have central barriers, so using high beams won’t affect oncoming drivers. As a courtesy, turn off high beams during oncoming traffic. 3. When driving through pedestrian crossings in urban areas, alternate between high and low beams to alert pedestrians, enhancing safety. 4. Avoid using high beams in rainy or foggy conditions. Instead, turn on the fog lights, which have stronger penetration, making your vehicle more visible to others.

5

1

Share

When is the implementation time of China VI emission standards in Hunan Province?

Hunan Province follows the timeline issued by the national government. The official implementation date for China VI-A standards is July 1, 2020, while the China VI-B standards will officially take effect on July 1, 2023. Below is relevant information: 1. The China VI emission standards, officially named "National Sixth Stage Emission Standards for Motor Vehicles," were established to enforce environmental protection laws, reduce and prevent vehicle exhaust pollution, protect the ecological environment, and ensure public health. 2. Currently, the national government divides the "China VI standards" into two phases: "China VI-A" and "China VI-B." China VI-A serves as a transitional phase to China VI-B, imposing stricter emission requirements for carbon monoxide, non-methane hydrocarbons, nitrogen oxides, and PM (particulate matter).

11

4

Share

What Causes the Engine Noise in Buick Excelle?

Why does the car fail to start after two ignition attempts?

Does One-Button Start Require Self-Check?

Should you use internal or external air circulation when turning on the car's air conditioning?

Are Front Shock Absorbers Left and Right Specific?

How to operate the high-low beam alternation in Subject 3?

When is the implementation time of China VI emission standards in Hunan Province?

How to Replace Coolant?

How to View Dash Cam Footage?

What Are the Reasons for Increased Car Noise?

How to Deal with Foggy Windows in Winter?