What Causes the Engine Exhaust System Warning Light to Illuminate?

What is the most suitable size of copper wire for car jumper cables?

25 square millimeters is the most suitable size of copper wire for car jumper cables. Because the current is large when starting the engine, the smaller the resistance of the jumper cables, the better. How to use car jumper cables: First, clamp the red wire of the jumper cable to the red positive terminal of the "rescued car's" battery, then clamp the other end of the red wire to the red positive terminal of the "rescue car's" battery; Clamp both ends of the black wire to the black negative terminals of the "rescued car" and the "rescue car" batteries respectively; Start the engine of the "rescue car" first; Then start the engine of the "rescued car". Precautions for using jumper cables: After successfully starting the engine, the jumper cables must be removed in the correct order, otherwise it may cause a short circuit. If the rescued car still cannot start, check whether there is poor contact at the metal connection points.

11

2

Share

What Causes the Start-Stop Function Failure in Buick Excelle?

There are many reasons why the auto start-stop function in Buick Excelle may not work. For example, when the vehicle's battery charge is very low, the temperature is too high, the pressure in the brake system drops below a certain point, or the outside temperature is too high or too low, the start-stop system will not activate. In such cases, it is necessary to have the system checked with a computer at a 4S shop. Auto start-stop is a system that automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts the engine automatically when it's time to move forward again. Solutions for start-stop malfunction: Engage the starting gear. If neither the starter nor the engine can turn, inspect the starting system for faults, checking the battery's charge status and terminal connections. If the battery is normal, examine the starting wires, fuses, and ignition switch for damage, replacing them if necessary. Press the accelerator to a medium position; if the engine starts, the issue may lie with the idle control valve, its pipelines, or an intake pipe leak, requiring attention at the nearest 4S shop or repair facility.

1

2

Share

What is a Pagani?

Pagani is an Italian ultra-luxury sports car brand, founded in 1982 with its headquarters located in Modena, Italy. Here are the relevant details: 1. In terms of positioning: Pagani is a 2-door, 2-seater hardtop supercar. 2. In terms of body dimensions: The Pagani measures 4605*2036*1169 mm in length, width, and height. 3. In terms of power: The Pagani is equipped with a 6.0-liter twin-turbo V12 engine, delivering a maximum horsepower of 750 hp, a maximum power output of 551.5 kW, a maximum torque of 1000 N·m, a top speed of 370 km/h, and a 0-100 km/h acceleration time of 3.2 seconds. 4. In terms of transmission: The Pagani uses a 7-speed sequential gearbox. In terms of drivetrain, the Pagani is. 5. In terms of suspension type: Both the front and rear suspensions of the Pagani are double-wishbone independent suspensions. 6. In terms of tire specifications: The front tire specification is 255/35R19, and the rear tire specification is 335/30R20.

2

3

Share

What Causes Engine Idle Vibration After Maintenance?

Engine idle vibration after maintenance is usually caused by unstable idling, cylinder misfire, or oil dripping onto the oxygen sensor during maintenance. It's necessary to have it rechecked at an auto repair shop. Engine cylinder misfire mainly refers to one or more cylinders not functioning properly, typically manifested as noticeable intermittent exhaust flow, severe shaking of the exhaust pipe, and obvious engine vibration, sometimes accompanied by a sputtering sound. The car engine is the power-generating device of the vehicle, serving as its heart, and determines the car's power, fuel efficiency, stability, and environmental friendliness.

10

0

Share

Can I Not Pay Insurance for a Car That Won't Be Driven for a Year?

It is best not to skip paying insurance for a car that won't be driven for a year. If the vehicle reaches the time for insurance renewal but the owner fails to renew it and lets it lapse, the owner may face an increase in the insurance rate upon renewal. Additionally, a vehicle that has lapsed in coverage will require a new inspection when renewing the insurance, adding to the procedures and causing more inconvenience for the owner. Here is some relevant information about vehicle insurance: 1. For vehicle insurance, commercial insurance can be completely canceled, while compulsory traffic insurance cannot be canceled if the vehicle's registration is canceled or if the vehicle is stolen. However, compulsory traffic insurance can have its coverage period extended. If the proper procedures are followed, there will be no adverse consequences. If the owner does not file for a suspension of use with the vehicle management office, the vehicle may lapse in inspection, leading to penalties or even cancellation of the vehicle's registration. 2. If the owner neither files for a suspension of use nor pays the insurance and vehicle tax, when renewing the insurance the following year, the owner will be required to pay the previous year's vehicle tax along with late fees (calculated daily). Additionally, the compulsory insurance rate may revert to the original price, and commercial insurance may lose any previous discounts, among other consequences.

11

5

Share

What brand of engine oil should be used for BMW M4?

BMW M4 uses Castrol original equipment manufacturer (OEM) engine oil. Precautions for changing engine oil: 1. Pay attention to the timing of oil changes. The interval for oil changes is generally determined by mileage and time: conventional mineral oil should be changed every 5,000 kilometers or six months; semi-synthetic oil every 7,500 kilometers; and full-synthetic oil every 10,000 kilometers. 2. Be mindful of the amount of oil added. The oil level should be slightly below the mark on the dipstick and not overfilled. Engine oil is crucial for engine operation as it serves the dual functions of lubrication and heat dissipation. Therefore, the engine must never run without oil. However, excessive oil can increase the rotational resistance of the crankshaft, reduce engine output power, and cause the excess oil to enter the combustion chamber, leading to oil burning, blue smoke emissions, and increased fuel consumption. 3. Choose the right engine oil. In terms of types, the most common engine oils on the market today are semi-synthetic and full-synthetic oils. This is because modern car engines are increasingly advanced, requiring higher-quality engine oil. Comparatively, full-synthetic oil is of higher quality.

11

3

Share

What Causes the Engine Exhaust System Warning Light to Illuminate?

What is the most suitable size of copper wire for car jumper cables?

What Causes the Start-Stop Function Failure in Buick Excelle?

What is a Pagani?

What Causes Engine Idle Vibration After Maintenance?

Can I Not Pay Insurance for a Car That Won't Be Driven for a Year?

What brand of engine oil should be used for BMW M4?

What Causes the Abnormal Noise When a Car Starts?

Can New Energy Vehicles Be Charged with Household Power?

At what temperature does summer windshield washer fluid freeze?

How many points are deducted for driving the wrong way on a one-way road?