What Causes the Dashboard Rattle in a Land Rover Range Rover While Driving?

1 Answers
QuinnAnn
07/30/25 4:19am
The causes of dashboard rattle in a Land Rover Range Rover while driving are as follows: 1. Air vent rattle: Check if the air vents are loose or if the rattle is caused by a perfume bottle installed in the vent. Tighten the vents or pad the edges with some 3M tape. 2. Thermal expansion and contraction: In winter, rattling may occur during cold starts but disappear once the car warms up. 3. Loose dashboard panel: Remove and re-tighten the panel or wrap tape around the clips to fix the issue. 4. Loose connectors or wiring harness in the dashboard: For vehicles with aftermarket reverse cameras, a plug might not be fully inserted, or the wiring harness or clips may not be secured properly. Additionally, a screw left behind after modifications could cause noise due to vehicle vibration.
Was this review help?
12
5
Share
More Forum Discussions

Where to Transfer Vehicle Ownership?

To transfer vehicle ownership, you need to apply at the vehicle management office where the vehicle was originally registered for license plates. Both parties involved must bring their ID cards, and the vehicle must be present during the transfer process. Additionally, all traffic violations and accidents related to the vehicle must be resolved, and all vehicle documents must be complete. It's important to note that vehicle ownership transfer cannot be processed in a different location from where the vehicle was originally registered. Below are the relevant details: 1. Required documents for vehicle ownership transfer: Vehicle registration certificate; Vehicle license; Invoice; Original ID cards of both buyer and seller; Proof of vehicle purchase tax; Insurance policy; Used vehicle sales contract (to be filled out at the transfer office); The vehicle must be present. 2. Important considerations for vehicle ownership transfer: (1) Ensure the property certificate is valid: Pay special attention to the embossed number, engine number, and registration date on the property certificate. (2) Check for any traffic violations: Before transferring ownership of a used vehicle, verify if there are any outstanding traffic violations and ensure the vehicle's compulsory traffic insurance is still valid. Only vehicles with no violations and valid insurance can proceed with the transfer. (3) Verify the vehicle purchase tax payment receipt: Always check the original tax receipt for the vehicle. Some vehicles may not have paid the purchase tax, and after the transfer, the new owner may be required to pay the outstanding tax. (4) Follow the proper procedure: If both parties are unfamiliar with the used vehicle sales and transfer process, it can lead to delays and future complications. Therefore, after agreeing on a price, it's advisable to engage a professional agency to handle the paperwork to avoid unnecessary hassles.
18
2
Share

Can Tap Water Replace Windshield Washer Fluid?

Windshield washer fluid cannot be replaced with tap water. Here are the specific functions of automotive windshield washer fluid: 1. Cleaning performance: Windshield washer fluid is formulated with multiple surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. 2. Antifreeze performance: It can significantly lower the freezing point of the liquid, thus providing antifreeze effects and quickly dissolving frost. 3. Anti-fog performance: A single-molecule protective layer forms on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear field of vision. 4. Anti-static performance: After cleaning with windshield washer fluid, substances adsorbed on the glass surface can eliminate surface charges, providing anti-static properties.
17
2
Share

How many people in a 7-seater vehicle will result in a 12-point penalty for overloading?

Driving an operational passenger vehicle (excluding buses) or school bus with passengers exceeding 20% of the approved capacity will result in a 12-point penalty. Below is an introduction to overloading: 1. Introduction: Overloading refers to the actual load of a transportation vehicle exceeding the approved maximum allowable limit, mostly referring to freight overloading, which is illegal. 2. Hazards: Overloading poses significant hazards, leading to numerous traffic accidents that endanger lives and property, and also causing damage to the roads on which overloaded vehicles travel. 3. Phenomenon: The destruction and losses caused by overloading in freight transportation are shocking. Relevant authorities continuously emphasize strict management, but the problem persists without fundamental improvement. To this day, overloading has not seen a fundamental turnaround, and in some cities, it has even worsened, becoming a 'cancer' in road transportation.
8
1
Share

How to measure the oil level of Volvo S60?

Park the vehicle on a level surface, turn off the engine, and let it sit for 15 minutes. First, pull out the dipstick, wipe it clean, and then slowly reinsert it, ensuring that the dipstick reaches the bottom of the oil pan. If the oil level is below the minimum mark, you need to add the appropriate amount of oil.
8
2
Share

How to Use the 2021 Sagitar Dash Cam?

Before use, insert a memory card. Press and hold the power button to turn it on or off. The mode button allows you to switch between recording, photo, or preview modes. Selecting the recording mode will automatically start recording; press the confirm button to pause. Use the up and down buttons to select video or photo files, press the OK button to play or pause, and press the mode button to exit.
7
3
Share

How to activate the one-touch window lift for the 2021 Excelle?

Power on the vehicle, hold the window switch in the closed position. After the window is fully closed, continue holding it closed for 6 seconds. Hold the electric window switch in the open position. After the window is fully opened, continue holding it open for 2 seconds, then hold the electric window switch in the closed position. After the window is closed, continue holding it closed for 2 seconds. Once these setup steps are completed, the one-touch window lift function for the Excelle will be ready to use.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.