What Causes the Dashboard Lights to Not Illuminate?

Can the Spare Tire on a Car Be Used Long-Term?

The spare tire on a car cannot be used long-term. A spare tire is not meant to replace a regular tire for extended periods. Due to its infrequent use, it has relatively less friction with the ground. If you replace a regular tire with a spare, the differing friction coefficients, ground adhesion, and tire pressures among the four tires can negatively impact the vehicle's braking system, steering system, and suspension system over time, posing significant safety risks. When changing tires, bolts should be tightened diagonally to ensure even force distribution and prevent wobbling during driving. Additionally, when using a spare tire, it's important to monitor your speed—it is recommended not to exceed 90 kilometers per hour.

1

5

Share

What do the letters TSI in cars stand for?

In automobiles, TSI respectively stands for Turbocharging, Supercharging, and Injection (fuel direct injection). TSI refers to turbocharged, supercharged, and direct-injection engines. In the strictest sense, TSI technology represents the integrated application of twincharging and stratified injection technologies, which demands relatively high technical expertise. In the Chinese market, Volkswagen's TSI technology employed in mass-produced mid-to-low-end vehicles actually denotes Turbocharger Fuel Stratified Injection, which is equivalent to TFSI (Turbo Fuel Stratified Injection) rather than Twinscharger (twincharger) Fuel Stratified Injection.

17

5

Share

How to Turn Off the Auto Start-Stop System in Audi?

Audi auto start-stop system can be turned off by the following methods: 1. Power on the car, locate the start-stop system button on the center console or behind the gear lever, then press the auto start-stop button. 2. The auto start-stop function is enabled by default ("yellow light off"). When you press the button to disable it, the "yellow light turns on" indicating the function is deactivated. 3. Alternatively, you can request the car manufacturer to set the auto start-stop function as disabled by default. Note that if you brake heavily or shift gears multiple times, the engine may stall as the system interprets these as misoperations.

18

5

Share

What Causes Severe Window Glass Vibration in Haval H6 Coupe?

Severe window glass vibration in the Haval H6 Coupe is primarily caused by dried-out or hardened aging of the sealing strips due to prolonged lack of maintenance. When driving on bumpy roads, this condition leads to noticeable shaking of the vehicle's windows. Below are additional details about window glass issues: 1. Rubber seal aging is the most common cause of window glass noise. For new vehicles experiencing noise, purchasing a lubricant and evenly applying it to the rubber seals, then repeatedly raising and lowering the windows to check if the noise reduces is recommended. If the rubber seals are severely aged, direct replacement is necessary. 2. The gaps in the sealing strips of the window tracks can easily accumulate dust and particles during window operation, which may cause vibration and noise. Excessive buildup of these contaminants can damage the window motor, leading to noise or even impairing the window's functionality. Using tools to clean debris from the tracks is advisable.

20

1

Share

In which country are Ford vehicles produced?

Imported Ford models are produced in the United States, while Changan Ford or Jiangling Ford models are produced in China. Below is a partial introduction about Ford: 1. Ford is one of the many brands under Ford Motor Company, not only a well-known brand in the United States but also has significant influence in the global market. Ford vehicles mainly consist of three series: Changan Ford, imported Ford, and Jiangling Motors. 2. Among them, Changan Ford has seven models: Focus, Mondeo, Kuga, EcoSport, Escort, Fiesta, and Edge; imported Ford has five models: Edge, Explorer, Mustang, Focus ST, and Fiesta ST; while Jiangling Motors has only two models: Ford Transit and Classic Transit, which are relatively fewer.

3

5

Share

How often should the spark plugs of the Vision X6 be replaced?

The spark plugs of the Vision X6 should be replaced every 20,000 kilometers. Under normal maintenance conditions, car spark plugs are typically replaced after traveling 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. The following standards can be referred to for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the ignition sequence and secure the cover plate.

14

5

Share

What Causes the Dashboard Lights to Not Illuminate?

Can the Spare Tire on a Car Be Used Long-Term?

What do the letters TSI in cars stand for?

How to Turn Off the Auto Start-Stop System in Audi?

What Causes Severe Window Glass Vibration in Haval H6 Coupe?

In which country are Ford vehicles produced?

How often should the spark plugs of the Vision X6 be replaced?

What is the wheelbase of the Avalon?

What is the Veneno car?

Where is the car's transmission located?

Where to Store the Spare Car Key?