What Causes the Dashboard Lights Not to Work?

2 Answers
DiJasper
07/25/25 9:17pm
The reasons for dashboard lights not working are as follows: 1. The dashboard illumination light is damaged. 2. The power supply wire of the dashboard is broken. 3. The dashboard power supply fuse is blown. 4. The solution is to check the dashboard power supply fuse and replace it if blown; disassemble the dashboard, as the illumination lights are usually located at the rear of the dashboard, and replace the non-working illumination lights. Below is additional information about dashboard lights: 1. Indicator light on: Immediately observe the odometer. If the accumulated mileage reaches or exceeds 100,000 km, the timing belt must be replaced; otherwise, the timing belt may break, causing the engine to malfunction. 2. Turn off the indicator light: After replacing the new timing belt, remove the rubber plug covering the reset switch on the odometer panel, press the internal switch with a small rod to turn off the timing belt indicator light. 3. Troubleshooting: If the indicator light does not turn off after operating the reset switch, it may be due to a malfunctioning reset switch or a short circuit in the wiring, which should be inspected and fixed. After replacing the new timing belt, also remove the odometer and reset all readings on the odometer to "0."
Was this review help?
18
1
Share
LiamAnn
08/11/25 10:13pm
Oh, dashboard lights not working is indeed quite common. I encountered this issue last time—it could be a burnt-out bulb; after prolonged use, several filaments are prone to break. Or maybe a fuse has blown, usually hidden in the fuse box; try replacing it with a new one. Wiring issues are also common, like loose connectors or aged wires, which can prevent current from passing through. If the entire dashboard is dark, it might be a relay failure or unstable power supply, possibly due to insufficient alternator output. I suggest first checking the fuses and bulbs yourself and replacing them if needed; if that doesn’t work, it’s best to find a skilled mechanic to take a look. Driving without clear visibility is highly risky.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

Can 17565r14 and 17570r14 be used interchangeably?

There is an impact. Due to different specifications and pressure ratings, they cannot be interchanged. 175: The tire width is 175 millimeters; 65: Known as the tire's aspect ratio, meaning the ratio of the sidewall height to the tire width is 65%; R: Radial tire, 14: The rim diameter is 14 inches. 165: The tire width is 175 millimeters; 70: Known as the tire's aspect ratio, meaning the ratio of the sidewall height to the tire width is 70%; R: Radial tire, 14: The rim diameter is 14 inches. Additional information: 1. Wheel modification: Wheel modification is often the first step for many people. Not only does it significantly enhance the appearance of the vehicle, but it also directly improves certain aspects of the car's performance. 2. Wheel deformation: The most direct effect of wheel deformation is causing your vehicle to pull to one side. This may not be noticeable at low speeds, but at high speeds or when accelerating, even a slight deviation can be magnified, affecting safety.
6
0
Share

What Causes a 170 Gasoline Engine to Start and Then Stall Immediately?

170 gasoline engine starts and then stalls immediately for the following reasons: 1. Spark plug: The spark plug loses its ignition capability. 2. Throttle: The throttle malfunctions. 3. Carbon deposits: Carbon deposits cause incomplete combustion of gasoline, leading to engine shaking. Engine carbon deposits have a significant impact on the car. First, they reduce engine power, resulting in uneven power output and gradual attenuation—in other words, the engine becomes increasingly weak. Second, they increase fuel consumption, adding to your financial burden. Third, they make cold starts difficult, meaning the engine is hard to ignite. Severe carbon deposits in the combustion chamber can even cause cylinder knocking, producing noises during low-speed acceleration and damaging the pistons and crankshaft. This leads to engine overheating, severely compromising vehicle safety. Additionally, carbon deposits cause excessive emissions, not only failing annual inspections but also worsening environmental pollution. 4. Transmission load: Overloading the transmission degrades the quality and friction characteristics of the transmission fluid, increasing friction and wear. This results in transmission noise, and sludge (impurities or dirt) can form inside the transmission (e.g., in the valve body), causing issues like jerking, gear disengagement, impact, slipping, stalling, abnormal noises, delays, overheating, and oil leaks.
5
3
Share

What are the tips for answering point deduction questions in the Subject 1 exam?

Subject 1 of the driver's license exam primarily tests knowledge of "Road Safety Laws and Regulations," and questions related to these regulations tend to have high error rates. This is especially true for point deduction questions, as there are many types of violations, each carrying different point penalties. Content of the Subject 1 exam: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; fundamentals of safe and civilized driving; basic knowledge related to motor vehicle operation. Exam duration: The Subject 1 exam lasts 45 minutes. Passing score for Subject 1: The Subject 1 exam consists of 100 questions, including true/false and multiple-choice questions, with a total score of 100. A score of 90 or above is required to pass. The exam questions are randomly selected and combined by the computer-based driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations."
3
3
Share

What Causes Keyless Entry Failure in Cars?

Keyless entry failure in cars may be due to a dead key fob battery, a depleted car battery, malfunctioning sensor modules, or nearby interference sources. Regardless of subsequent troubleshooting or repairs, the first step is to use the backup mechanical key to unlock the door. Here is information about the car keyless entry system: 1. Introduction: The car keyless entry system, abbreviated as PKE (PASSIVE-KEYLESS-ENTER), utilizes the world's most advanced RFID radio frequency technology and vehicle identity coding recognition system. It pioneered the development of miniaturized, low-power RF antenna solutions. 2. Working Principle: When the owner turns the key to start the vehicle, the base station emits a low-frequency signal to initiate the authentication process. The transponder in the key fob derives its operating energy from the base station's low-frequency signal. During authentication, the transponder first sends its own ID number. After verification by the base station chip, the base station transmits a random number string and MAC address, to which the transponder responds.
1
2
Share

How is the Manual Evaluation for Subject Three Conducted?

Subject Three manual evaluation is as follows: Traffic Accidents: Dangerous situations during driving that may lead to traffic accidents. Intersections: Failure to follow traffic signals when passing through intersections. Center Line: Crossing the solid center line and driving in the opposite direction, or during the straight-line driving test, the vehicle moves from the normal lane to another lane. Failure to follow the test items as instructed by the computer voice. Below are the related details: Part One: Computer automatic evaluation mainly focuses on the candidate's completion of vehicle mechanical operations, such as light usage, gear shifting, etc. Part Two: The examiner's manual evaluation in the background primarily assesses the candidate's safety awareness, safe operations, and compliance with road traffic signs, markings, and the application of road traffic safety laws. Part Three: The safety officer will "apply the auxiliary brake in five situations" to terminate the test.
3
3
Share

How many seconds is the maximum allowed for semi-coupled starting in Subject 3?

Subject 3 examination regulations stipulate that the continuous clutch depression time should not exceed 10 seconds (5 seconds in some provinces and cities). Relevant information is as follows: The specific reasons are as follows: This means the clutch depression time before and after gear shifting should not be too long, otherwise it will result in immediate failure. Except for starting and gear shifting, there is no need to keep the foot on the clutch pedal. Keeping the foot on the clutch pedal for extended periods can easily cause prolonged semi-clutch state, leading to high temperatures and damage to the clutch friction plates. Additional information: Do not skip gears when upshifting. Skipping gears during upshifting will result in a mismatch between speed and gear ("low speed with high gear"), causing severe vehicle body vibration and potentially stalling the engine. While skipping gears during upshifting is prohibited, accidental wrong gear shifts may occur during driving, such as shifting from 1st to 4th gear instead of 1st to 2nd gear. Therefore, extra attention is required during upshifting.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.