What Causes the Dashboard Brake Light Not to Illuminate?

2 Answers
SanJade
07/24/25 2:47pm
There are many reasons why the dashboard lights of a car may not illuminate, including a blown fuse in the dashboard, a dead car battery, excessively bright external lighting, or the lights not being turned on. The specific explanations are as follows: 1. Blown fuse in the dashboard: If the dashboard fuse blows, it will not only cause the dashboard lights to not illuminate but also prevent the dashboard needles from moving. In this case, a new fuse needs to be replaced to avoid unnecessary trouble caused by the dashboard not functioning properly. 2. Dead car battery: Insufficient power can also cause the dashboard lights to not illuminate. 3. Turning the light control knob one notch can make the dashboard lights come on. This car has light-sensitive dashboard lights; when the surrounding environment is dark and the lights need to be turned on, the dashboard lights dim to remind the driver to turn on the headlights promptly (while the dashboard lights also illuminate).
Was this review help?
6
3
Share
MorganAnn
08/11/25 8:31am
When the dashboard brake light doesn't illuminate, I recall similar situations I've encountered after driving for over a decade. The most common cause is a burnt-out bulb, especially in older vehicle models where filaments are prone to melting. Simply replacing it with a new bulb will do. Alternatively, it could be a blown fuse—just locate the brake light fuse in the engine compartment's fuse box, inspect it, and replace it for just a few dollars. Corroded wiring harness connectors are also frequent culprits; try unplugging and cleaning them. Issues with the brake system, like low fluid levels, typically trigger the light to come on, but if the light stays off, the sensor itself might be faulty, masking the warning. This is extremely dangerous as hidden brake hazards can easily lead to accidents. Upon noticing this, conduct an immediate inspection without delay—starting with simple checks like bulbs and fuses saves both money and hassle. Develop a habit of checking dashboard light status before driving as a preventive measure.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

What are the differences between Jetour X70S and X70?

The differences between Jetour X70S and X70 are: 1. Different transmissions: The Jetour X70S is equipped with a 6-speed dual-clutch transmission; the Jetour X70 is equipped with a 6-speed manual transmission. 2. Different dimensions: The length, width, and height of the Jetour X70S are 4750mm, 1910mm, and 1710mm respectively; the Jetour X70 measures 4720mm in length, 1900mm in width, and 1710mm in height. 3. Different trunk volumes: The trunk volume of the Jetour X70S is 1260L; the Jetour X70 has a trunk volume ranging from 670L to 1680L. The Jetour X70 comes with 235/60R18 tires, featuring a front MacPherson independent suspension and a rear multi-link independent suspension.
6
3
Share

How to use the lights on the Qoros 5?

The method for using the lights on the Qoros 5 is: 1. On the left side of the steering wheel, there is a set of light combination switches. At night, rotating the combination switch forward one notch turns on the instrument panel lights, and rotating it another notch turns on the low beams; 2. The low beams should be turned on when driving on roads with streetlights at night, when encountering pedestrians on the roadside at night, and on narrow roads, narrow bridges, or curves; 3. The high beams should be turned on when driving on roads without streetlights or in dark conditions at night. Rotating the switch forward one more notch activates the high beams. The Qoros 5 is a compact 5-door, 5-seat SUV with dimensions of 4600mm in length, 1869mm in width, and 1658mm in height, and a wheelbase of 2710mm. It is equipped with a 7-speed dual-clutch transmission and has a top speed of 200 kilometers per hour.
11
3
Share

What procedures are required for cross-region vehicle transfer?

The procedures required for cross-region vehicle transfer include: 1. After confirming the purchase of the vehicle, go to the local second-hand car trading market to complete the transaction and obtain a nationally unified second-hand car transaction invoice; 2. After purchasing the vehicle, apply at the local vehicle management office, providing the new owner's identity proof during the application process; 3. After the vehicle transaction is completed, the vehicle insurance that has not expired needs to be transferred, and some insurance companies can directly handle the transfer; 4. After returning to the local area, bring the relevant materials to the local vehicle management office for review. Once the review is passed, the vehicle can be inspected, licensed, and the driving license can be obtained.
4
2
Share

What are the body length, width, and height dimensions of the Honda Lingpai?

Honda Lingpai's body length, width, and height dimensions are 4756mm, 1804mm, and 1509mm respectively, with a wheelbase of 2730mm. It is equipped with a CVT continuously variable transmission and features a 4-door, 5-seater sedan body type, with a top speed of 180 km/h. The Honda Lingpai is powered by a 1.5L L4 naturally aspirated engine, producing a maximum torque of 134 Nm and a maximum horsepower of 109 PS, with a fuel tank capacity of 40L. The car adopts a front-engine, front-wheel-drive layout, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. The tire specification is 215/55R16.
18
0
Share

How often should the Mondeo's cabin air filter be replaced?

The Mondeo's cabin air filter should be replaced every 20,000 kilometers. The cabin air filter is a filter installed in the car's air conditioning system that absorbs dust particles, reduces respiratory discomfort, minimizes irritation for allergy sufferers, and protects the air conditioning cooling system. The Mondeo is classified as a mid-size sedan, equipped with a 1.5T L4 engine featuring turbocharged intake, delivering a maximum horsepower of 182ps and a peak torque of 243Nm. This vehicle measures 4873mm in length, 1852mm in width, and 1470mm in height, with a wheelbase of 2850mm. It features a 4-door, 5-seat sedan body style and comes with a 6-speed automatic transmission.
19
0
Share

Where is the OBD interface of the Peugeot 5008 located?

The OBD interface of the Peugeot 5008 is located beneath the front seat ashtray in the center console. OBD stands for On-Board Diagnostics system. The Peugeot 5008 offers two variants of 1.6L VTi turbocharged gasoline engines, along with two 1.6L and two 2.0L HDi diesel engines. The two VTi gasoline engines deliver power outputs of 120bhp and 156bhp respectively, with fuel consumption rates of 7.3L/100km and 7.1L/100km. The Peugeot 5008 measures 4670mm in length, 1855mm in width, and 1650mm in height, with a wheelbase of 2840mm. It features a 6-speed automatic transmission, producing a maximum torque of 250Nm and a maximum power output of 125kW.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.