What Causes the Clicking Sound When Braking to the Bottom?
2 Answers
The causes of the clicking sound when braking to the bottom: 1. Normal activation of ABS; 2. Electronic linkage between the brake system and the automatic transmission; 3. Brake system failure; 4. Loose connection in the chassis; 5. Worn-out brake pads; 6. Hard spots or impurities in the brake pads; 7. Poor-quality brake pads. Solutions for the clicking sound when braking to the bottom: 1. Replace with new brake pads; 2. Remove the brake pads and grind off the hard spots with an angle grinder; 3. Take the vehicle to a 4S shop for inspection as soon as possible; 4. Check the brake system; 5. Inspect the belt tension; 6. Clean out any foreign objects in the brake pads.
A while ago, my car also had this issue where there was a clunking sound when braking hard. I remember being startled the first time, thinking the brakes were broken. After checking, I found that the most common cause of this sound is the anti-lock braking system (ABS) activating. Especially during emergency stops, it rapidly pulses the brakes to prevent wheel lock-up, creating a clunking noise and vibration. This is more noticeable on slippery roads or during sharp turns. However, it could also be due to other issues, such as unevenly worn brake pads or foreign objects stuck on the brake discs. Last time I went to the repair shop for an inspection, they said it was normal ABS activation, but I always insist on regular brake system maintenance. I recommend staying calm if you encounter a similar situation, but be sure to visit a professional shop as soon as possible. After all, brake safety is not something to take lightly, as it could prevent potential problems from worsening and affecting overall driving. During routine vehicle checks, pay extra attention to brake response and the frequency of unusual noises.
