···
Log in / Register

What Causes the Clicking Sound When Accelerating?

5 Answers
VonMartin
07/23/25 12:26pm

The reasons for the clicking sound when accelerating are: 1. The engine temperature is too low, and the parts and oil have not reached an optimal working environment and condition; 2. Insufficient engine oil or long-term failure to change the oil, leading to oil degradation, which affects its lubrication and causes parts to rub and produce noise; 3. Twisted, broken, or worn spline teeth on the car's half-shaft; 4. A loose engine belt, causing idle revving when accelerating. Methods for maintaining a car engine include: 1. Regularly changing the oil and filter; 2. Using lubricants of appropriate quality grades; 3. Periodically cleaning the radiator; 4. Maintaining the three filters; 5. Ensuring good crankcase ventilation; 6. Regularly cleaning the crankcase; 7. Periodically cleaning the fuel system.

Was this review help?
2
1
Share
AryaLynn
08/10/25 10:24am

As a car owner, the ticking noise when stepping on the accelerator recently is really worrying. After checking, it might be an issue with the engine's valve mechanism, such as wear in the hydraulic lifters or excessive clearance causing noise. It could also be a fault in the ignition system, like aging spark plugs leading to abnormal combustion. Another possibility is from the chassis, such as loose suspension components or a failed belt tensioner. This sound is usually noticeable during low-speed acceleration. It's recommended to first check if the engine oil level is sufficient, as dirty or insufficient oil can cause inadequate lubrication of the valves. If the problem persists, it's best not to ignore it and quickly consult a professional mechanic to diagnose the specific issue using a stethoscope. Otherwise, a minor fault could turn into a major repair, leading to higher costs. Regular oil changes and scheduled maintenance can prevent many similar issues.

Was this review help?
20
1
Share
Expand All
VonAnnie
09/22/25 3:57am

As a family car user, considering the safety of children in the car, the clicking sound when stepping on the accelerator is quite unsettling. This is commonly caused by engine knocking or valve tapping, due to premature fuel ignition in the cylinder or incorrect ignition timing. Another common reason is wear in drivetrain components, such as the flywheel or clutch. If ignored, the sound may grow louder and could potentially lead to internal engine damage. It is recommended to immediately stop in a safe place and check under the hood for any foreign objects or loose pipes. Avoiding sudden acceleration during daily driving can reduce the likelihood of occurrence, and reminding the mechanic to focus on inspecting the ignition system and valves during maintenance is advisable. Ensuring the vehicle's health is key to maintaining safety.

Was this review help?
15
1
Share
Expand All
ReedDella
11/05/25 7:17am

As a DIY car repair enthusiast, don't panic when you hear a ticking sound. It might be caused by excessive valve clearance or carbon buildup on spark plugs. Try checking the oil dipstick to see if the level is normal, and top up with the same type of oil if it's low. Additionally, use a flashlight to inspect whether the engine belt is loose or cracked. A simple diagnosis is to lightly press the accelerator after a cold start and listen for the sound's location—if it's coming from the top of the engine, it's likely a valve issue. Sometimes, replacing spark plugs or tightening bolts yourself can fix the problem, but if you lack experience, don't force it to avoid accidental injuries. Remember to buy parts from reputable stores to ensure compatibility.

Was this review help?
2
5
Share
Expand All
Rhett
12/26/25 9:05am

Having driven for decades, I've encountered the ticking sound multiple times, usually caused by irregular noises from loose valve lifters due to engine aging or carbon buildup in the combustion chamber. It could also be an intake system issue, such as a dirty throttle body causing uneven air intake. Addressing it promptly can prevent subsequent power loss and increased fuel consumption. It's recommended to perform minor checks every six months, including cleaning the air filter and testing compression ratio. Don't rush to replace parts; first conduct a professional diagnosis to identify the root cause. Remember, vehicle maintenance is key—changing engine oil and coolant on schedule can significantly extend engine life.

Was this review help?
11
5
Share
Expand All
More Forum Discussions

How Often Should Engine Oil Be Changed in a Van?

Van engine oil should be changed every 5,000 to 10,000 kilometers, or every six months to one year. Engine oil, also known as motor lubricant, plays a crucial role in lubricating the engine, reducing friction, aiding in cooling, and preventing rust and corrosion. It is often referred to as the 'blood' of a vehicle. Motor lubricant generally consists of two components: base oil and additives. The base oil is the primary constituent of the lubricant, determining its fundamental properties, while additives help compensate for any deficiencies in the base oil's performance. Inside the engine, numerous components move against each other during operation. These parts operate at high speeds under harsh conditions, with temperatures potentially exceeding 400 degrees Celsius. The presence of lubricating oil helps reduce wear on these components, thereby extending the engine's lifespan.
2
4
Share

Which automotive brand company does Lexus belong to?

Lexus is a luxury brand under Japan's Toyota, with models such as the Lexus ES, LX, LS, and RS. For example, the Lexus ES is the only series in the Lexus lineup that adopts a front-wheel-drive system. In terms of body dimensions, the Lexus ES measures 4900mm in length, 1820mm in width, and 1450mm in height. The Lexus ES is equipped with an advanced 2.5-liter DOHC engine and a 3.5-liter DOHC engine, both featuring Dual VVT-i (Variable Valve Timing with intelligence) systems, delivering maximum power outputs of 135 kW and 204 kW, respectively, and peak torques of 235 Nm and 346 Nm.
1
0
Share

How to Take Out the Spare Tire of the Sylphy?

Sylphy's spare tire requires removing the trunk partition, and then the spare tire can be taken out from below. The specific method for changing the spare tire: 1. Park the car on a flat and hard surface, turn on the hazard lights, and in case of rain, snow, or fog, place a triangular warning sign about 100 meters behind the car; 2. Loosen the screws of the tire that needs to be changed, then lift the car with a jack; 3. After lifting the car, remove all the screws from the tire and replace it with the new one; 4. After replacing the new tire, slightly tighten the screws and then lower the car; 5. Once the car is lowered, fully tighten all the screws on the tire, and the steps for changing the spare tire are completed.
2
2
Share

Can You Still Drive with a Flat Tire?

It is strongly advised not to continue driving when a car tire is flat, as this can cause damage to both the wheel rim and the tire, and also compromises driving safety. Tires are the only components of a car that come into direct contact with the ground, making them crucial for driving safety and stability. Tire pressure should neither be too high nor too low. If the tire pressure is too low, it can cause wave-like deformation during high-speed driving, which may lead to a blowout. Strictly speaking, tire pressure refers to the air pressure inside the tire. The dangers of low tire pressure include: excessive deformation of the tire body, increased likelihood of cracks on the tire sidewalls, flexing movements that generate excessive heat, accelerated rubber aging, fatigue in the fabric layers, and broken cords. Additionally, low pressure increases the tire's contact area with the ground, accelerating wear on the tire shoulders.
1
3
Share

Can You Still Drive When the Engine Fault Light Comes On?

When the engine fault light comes on, it is recommended to stop driving immediately to protect the engine. Continuing to drive may cause damage to the engine. With the advancement in automotive manufacturing, the engine itself rarely encounters issues. However, there are numerous sensors and electronic devices around the engine, along with critical components. If any of these malfunction, it may lead to the engine not functioning properly, triggering the engine fault light. The engine is surrounded by various sensors, such as the coolant temperature sensor, oxygen sensor, intake air temperature sensor, camshaft position sensor, knock sensor, etc. A failure in any one of these sensors can cause the engine to malfunction.
7
0
Share

What does it mean when the ABS light on the car is on?

When the ABS light on the car is on, it indicates a fault in the ABS system. ABS refers to the Anti-lock Braking System of the car, which continuously monitors the car's wheels to ensure they turn at the same speed. During braking, the ABS system controls the braking force to keep the wheels in a state of rolling and sliding (with a slip rate of about 20%), preventing them from locking up. This ensures maximum traction between the wheels and the road, avoiding skidding. If the ABS locks up and the car cannot move, the following diagnostic and troubleshooting steps should be taken: 1. Check the power supply circuit of the ABS regulator to eliminate power supply faults; 2. Check if the battery voltage is too low—if the battery is not at 12V, replace the battery or repair the charging system; 3. If the ABS control unit is faulty, take the car to a 4S shop for repair or replacement; 4. If the wheel speed sensor is faulty, check if the half-shaft gear has foreign objects stuck to it, which may damage the reluctor ring or solenoid valve—repair or replace the sensor or reluctor ring; 5. If there is a fault in the indicator light circuit, replace the instrument cluster.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.