What Causes the Clicking Sound in the Right Front Wheel of the Wuling Hongguang?

2 Answers
MacAvery
08/28/25 4:04am
If the sound occurs on rough roads, it may be an issue with the shock absorber. If the noise persists on smooth roads, check the braking system. Here are the relevant details: Possible Causes: Inaccurate four-wheel alignment can lead to uneven tire wear during long-distance driving, resulting in irregular wear patterns and causing noise. To diagnose, run your hand over the tire tread—if you feel unevenness on the inner or outer tread, this is likely the source of the noise. High-Speed Related Issues: Damage to the sidewall of the right tire may require tire replacement. If the noise occurs once per wheel rotation, the tire is likely the issue. If the right wheel rim is damaged, severe cases may necessitate wheel replacement, though damage is less likely at speeds below 10 km/h. If the vehicle vibrates at high speeds, perform a wheel balance check—the balancing weights on the right front wheel may have fallen off. If the vehicle pulls to one side while driving, the right front wheel suspension or stabilizer bar may be misaligned, requiring a four-wheel alignment.
Was this review help?
4
4
Share
VonBradley
09/10/25 2:34am
The issue of a clunking sound from the right front wheel of the Wuling Hongguang is something I've heard many people mention. As someone who frequently deals with this type of vehicle, I can say there are quite a few possible causes, with the most common being aging suspension components. Think about it: after prolonged driving on bumpy roads, control arms or ball joints can loosen and produce that clunking noise, especially noticeable when going over speed bumps. Worn wheel hub bearings are another major cause—excessive wear leads to that sticking and clunking sound. Additionally, if the shock absorbers fail and lose their damping ability, they can also create unusual noises. My advice is to start with simple checks: see if the tire pressure is normal and if the bolts are tight. If you're comfortable doing it yourself, inspect the suspension components and brake system—most of the time, it's these small parts causing the trouble. If you're still unsure, take it to a professional mechanic who can inspect it with a lift. Don't delay, as it could affect steering safety.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

Where is the oil filter for the Audi Q5 located?

Audi Q5's oil filter is located at the upper right front of the engine. The oil filter, also known as the oil cleaner, functions to remove debris, gum, and moisture from the engine oil, delivering clean oil to various lubrication points. To reduce friction between moving parts in the engine and minimize component wear, oil is continuously supplied to the friction surfaces of moving parts, forming a lubricating oil film for lubrication. Engine oil inherently contains a certain amount of gum, impurities, moisture, and additives. During engine operation, the introduction of metal wear particles, airborne contaminants, and the generation of oil oxidation products gradually increase the impurities in the oil. The Audi Q5 has a body length of 4629mm, width of 1898mm, height of 1655mm, and a wheelbase of 2807mm.
7
4
Share

What does the number after the subject three exam session mean?

Subject three exam session followed by the number refers to the meaning of sequential queuing. The following are the precautions for the subject three exam: Meeting: Meeting and turning at intersections. "Meeting" as the name suggests is the intersection of two cars. During the driving process, maintain a steady speed, avoid excessive speed, preferably not exceeding 30 kilometers. When two cars intersect, it is necessary to lightly step on the brake to avoid causing gear disengagement. When turning at intersections, speed control is still required, and attention should be paid to timely turning signals and downshifting. Changing lanes and turning around: Changing lanes and turning have the same requirements. Pay attention to turning signals and turn the steering wheel after 3 seconds, gradually returning to the correct lane. During the turning process, extra attention is still required, including turning signals, lightly stepping on the brakes, etc., which are still indispensable.
2
1
Share

Where is the battery located in the Cadillac CT6?

Cadillac CT6's battery is located in the trunk. The original battery is maintenance-free, so do not remove the cover or add liquid. When a new battery is needed, refer to the replacement number indicated on the original battery label. The Cadillac CT6 uses an Absorbent Glass Mat (AGM) 12-volt battery. Installing a standard 12-volt battery will shorten the battery's lifespan. The Cadillac CT6 is a high-end luxury sedan under the Cadillac brand, with body dimensions of 5184mm in length, 1879mm in width, and 1472mm in height, and a wheelbase of 3109mm.
7
4
Share

Where is the body control module located in the Volvo XC90?

Volvo XC90's body control module is located in the engine compartment, next to the glove box, or under the middle of the dashboard. The module has two connectors. The body controller (English: body control module, abbreviated as BCM), also known as the body computer, refers to the electronic control unit (ECU) used to control the vehicle's body electrical systems in automotive engineering. It is one of the important components of a car. The vehicle body control system includes automotive safety, comfort control, and information communication systems, mainly used to enhance the safety, comfort, and convenience of the vehicle. The dimensions of the Volvo XC90 are 4807mm in length, 1898mm in width, and 1784mm in height.
9
4
Share

What Does the Electric Motor Overheating Warning Light in a Pure Electric Vehicle Indicate?

It indicates that the vehicle's electric motor and controller are overheating, requiring the driver to pull over and allow for natural cooling. Below is relevant information about electric vehicles: Introduction: Battery Electric Vehicles (BEV) refer to vehicles powered by onboard power sources, using electric motors to drive the wheels, and meeting all requirements of road traffic and safety regulations. Types: There are primarily three categories of electric vehicles: pure electric vehicles, hybrid electric vehicles, and fuel cell electric vehicles. Power Source: Provides electrical energy to the drive motor of the electric vehicle, which converts the electrical energy into mechanical energy. The most widely used power source is lead-acid batteries, but with advancements in electric vehicle technology, lead-acid batteries are gradually being replaced by other types of batteries due to their low energy density, slow charging speed, and short lifespan.
9
1
Share

Can the engine be washed with a water gun?

Can the engine be washed with a water gun. It is best not to wash with a water gun in the following situations: Hot car state: The principle of thermal expansion and contraction, in the case of a hot car, high-pressure washing with cold water will cause the engine temperature to drop sharply, which may cause oil seal leakage, and in severe cases, cylinder block rupture may occur. Older cars: When cleaning the engine compartment of a new car, a high-pressure water gun can be used, but for cars that have been used for a long time, although the engine compartment is insulated, there is no guarantee that it will not cause a short circuit. It is best to ask the 4S shop master to blow it with an air gun during maintenance.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.