What Causes the Clicking Noise from the Wheels?

1 Answers
Kenneth
07/25/25 4:09am
The clicking noise from the wheels may be caused by damaged shock absorbers or foreign objects stuck in the wheels. Below is some extended information related to car maintenance: 1. Basic Introduction: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Purpose of Maintenance: Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
Was this review help?
6
4
Share
More Forum Discussions

How to Spray Windshield Washer Fluid in a Car?

To spray windshield washer fluid in a car, follow these steps: Pull the control stalk on the right side of the steering wheel (which also operates the windshield wipers) toward the driver to activate the spray. If no fluid is dispensed when pulling the stalk, avoid repeatedly pulling it, as this may indicate that the washer fluid reservoir is empty. In such cases, check the fluid level and refill it before attempting to use the system again. Windshield washer fluid is a specialized mixture of water, alcohol, and ethylene glycol designed to clean the windshield effectively. It also serves an anti-freezing function for the glass. Additionally, the ethylene glycol in the fluid provides lubrication to the windshield, helping to prevent corrosion of the rubber components in the wiper blades, thereby extending the lifespan of both the windshield and the wipers.
6
2
Share

Can the Accord Hybrid Model Get a Green License Plate?

The Accord hybrid model cannot get a green license plate, as it is a hybrid fuel-electric vehicle and does not qualify as a new energy vehicle, thus ineligible for green plates. Hybrid vehicles combine fuel and electric power, utilizing an electric motor as an auxiliary power source to drive the car, representing a complementary technology. The Accord is a model under GAC Honda, with dimensions of 4930mm in length, 1845mm in width, and 1470mm in height, and a wheelbase of 2775mm. In terms of exterior features, the car offers full LED headlights, LED front fog lights, headlight height adjustment, power-adjustable heated and folding side mirrors, and chrome-plated dual exhaust pipes.
5
0
Share

Will the sunroof of the Vision X6 automatically close when the engine is turned off?

The sunroof of the Vision X6 will automatically close when the engine is turned off. The function of automatically closing the windows after locking the car is triggered when the car is locked with the key or remote control, activating the window motor to achieve automatic closure. This helps avoid situations like the interior being flooded by rain at night or theft of items in the car or trunk when parked on the roadside. The Vision X6 is a model under Geely Auto, with body dimensions of 4546mm in length, 1834mm in width, and 1715mm in height, and a wheelbase of 2661mm. In terms of exterior design, the Vision X6 features a floating water ripple front grille, adopting Geely's family design with a piano black finish, seamlessly integrated with the black Geely logo.
6
2
Share

Is it necessary to repair a faulty motor Hall sensor?

It is necessary to repair a faulty motor Hall sensor. If the Hall sensor in an electric vehicle's motor burns out, you don't need to replace the entire motor; you can simply repair or replace the Hall sensor. Hall Sensor: The Hall sensor is a small electronic component inside the motor, usually three in number. The Hall sensor's signal wire transmits the position of the internal magnets relative to the coils. Based on the signals from the three Hall sensors, the controller determines how to supply power to the coils. Different Hall sensor states result in different coil current directions. If the Hall sensor malfunctions, abnormal startup behavior or unusual noises during startup may occur. Assessing Hall Sensor Damage: Use a motor tester or Hall sensor detector to assess the extent of the Hall sensor damage and determine whether the phase angle is 120 degrees or 60 degrees. This issue must be clarified to avoid complications during installation and testing.
5
5
Share

What does it mean to use engine braking on long downhill slopes?

Using engine braking on long downhill slopes means lifting the throttle when braking, not shifting into neutral, and not depressing the clutch, keeping the engine and transmission connected. The transmission drives the engine, relying on the engine's resistance to reduce the vehicle speed, thereby providing a certain braking effect. When engine braking is needed, keep the gear engaged, release the throttle, and do not depress the clutch. The lower the gear, the stronger the braking effect. The advantages of engine braking are: 1. The vehicle speed is always limited within a certain range, which helps in timely deceleration or stopping, ensuring driving safety; 2. It effectively reduces the frequency of using the foot brake, avoiding prolonged use of the brake, which can cause the brake friction pads to overheat, leading to reduced braking force or even failure.
19
0
Share

What does 'riding a Ghost Fire' mean?

Ghost Fire refers to a smaller scooter model produced by Yamaha. Ghost Fire: Ghost Fire, known as RSZ in English, is a smaller scooter model from Yamaha. It is equipped with a 100cc engine from Taiwan's Yamaha. Due to its stylish appearance and affordability, it has gained popularity and been widely purchased by some students and young adults in China. Basic Introduction: 'Ghost Fire' is a long-standing scooter model suitable for modifications and commuting. However, with the increase in scooter enthusiasts, the heightened crackdown by traffic police due to the low standards of a minority of riders has caused frustration among many. The first oil change should be done within 1,000 kilometers. Under special circumstances, if the scooter is used on poor road conditions, the oil change should be done earlier.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.