What Causes the CarPlay Central Control Screen to Go Black?

What is the maintenance case for an AMT transmission that does not upshift?

AMT transmission does not upshift maintenance case refers to a situation where the automatic transmission can only shift up to 1st gear during driving, and cannot shift to 2nd gear or higher gears; or it can shift to 2nd gear, but cannot shift to 3rd gear or overdrive. In such cases, it is necessary to seek professional repair from a 4S shop technician. Below is a relevant introduction to AMT transmissions: Overview: AMT is developed based on manual transmissions, retaining the gear-shifting structure and clutch of manual transmissions. The operations required for manual transmissions, such as pressing the clutch and selecting gears, are performed by an automatic control mechanism managed by a computer in AMT. Therefore, AMT essentially uses a computer system to operate the clutch and select gears. Technical Core: The core technology of AMT is microcomputer control, where the level and quality of electronic technology directly determine the performance and operational quality of AMT. Taking Magneti Marelli, the largest supplier of AMT, as an example, the AMT system design is completed through computer-controlled hydraulic shifting assistance systems, with components including pressure storage tanks, solenoid valves, etc.

6

2

Share

What are the causes of abnormal noise from the clutch pedal?

The main causes of abnormal noise from the clutch pedal are: wear or jamming of the release bearing; looseness of the separation lever pins and pin holes due to wear; looseness of the drive pins and pin holes due to wear. The specific details are as follows: 1. When judging the noise from the clutch, gently press the clutch pedal to make the release bearing contact the separation lever. The noise heard at this time is from the release bearing, which may be caused by insufficient lubrication or looseness and damage of the bearing. 2. Continuously press and release the clutch pedal. If noise occurs when the clutch is engaged or disengaged, the severity of the noise can help determine whether it is due to wear and looseness of the separation lever pin holes and support pins, or loosening of the rivets on the driven disc assembly, or failure of the damper. 3. After pressing and releasing the clutch pedal, press the accelerator pedal. If intermittent impact noise occurs, it may be due to failure or breakage of the release bearing return spring. For double-plate clutches, if a "clicking" noise is heard when the pedal is fully depressed, it is caused by excessive wear in the fit clearance between the intermediate pressure plate hole and the drive pin.

13

5

Share

How Long After Registration Can You Take the Subject 1 Test?

After scheduling the Subject 1 test, you can generally take the exam in about 5-10 days. Subject 1 does not limit the number of exam attempts. Each test offers two chances. If you fail both attempts, you will need to reschedule the exam. The Subject 1 exam process: Follow the staff's instructions to collect your driving school file in order at the waiting area. Bring and present your ID for inspection by the supervising officer. Mobile phones must be turned off upon entering the exam area. No loud talking is allowed in the exam area. Regulation textbooks are not permitted in the exam area (or should be placed in your bag). After the exam, keep your ID safe and submit the file to the "Submission Window" at the front of the exam area. Candidates who pass the exam should sign under the staff's guidance at the exit before leaving. Candidates who fail the exam may leave immediately and await notification from their driving school regarding the retake schedule.

4

3

Share

What to Do When the Windshield Washer Fluid Freezes and Causes the Motor to Stop Responding?

If the windshield washer fluid is frozen and the motor is not responding, this is usually caused by the frozen washer fluid. In this case, avoid frequent attempts to spray the fluid and focus on thawing it as soon as possible. Solution: If the windshield washer fluid is severely frozen and sunlight alone cannot thaw it, you can slowly add some lukewarm water to the reservoir. However, avoid using hot water, as it may not only fail to thaw the fluid but also risk cracking the reservoir, which is not cost-effective. Precautions for Using Windshield Washer Fluid: It is important to note that the windshield washer fluid used in winter should differ from that used in summer, especially in regions with significant temperature differences between seasons. Winter washer fluid should have properties such as antifreeze and cleaning capabilities. When winter approaches, choose a washer fluid with better antifreeze performance. If you are unsure about its antifreeze properties, check the freezing point of the fluid—it should be at least 10°C lower than the typical lowest temperature in your area. Additionally, when purchasing washer fluid, opt for reputable brands. Legitimate washer fluids are categorized based on temperature, allowing car owners to select the most suitable product for the current weather conditions.

12

4

Share

Can You Lock the Car with Windows Open?

You can lock the car with windows open, but it is not recommended. Here are some details about car windows: Introduction: Car windows are an essential part of the vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. Windows are categorized into front and rear windshields, side windows, and door windows based on their installation positions. The design, structure, and quality of windows significantly impact the driver's visibility, passenger comfort, exterior aesthetics, and aerodynamic performance. Function: Car windows are typically designed as curved, sealed structures. Rubber sealing strips are used to connect the window frame and glass, providing sealing and cushioning effects to prevent windshield damage due to frame deformation when the vehicle body is under stress.

7

0

Share

Is it okay if the car didn't stall when driving through a puddle?

If the car didn't stall when driving through a puddle, a comprehensive inspection should be conducted. Here are some precautions for driving through deep water: Avoid excessive speed: First, do not drive too fast. Use a low gear to enter the water smoothly and proceed slowly to prevent water splashes from wetting the engine's electrical components, which could cause the engine to stall. Maintain steady acceleration: Keep the accelerator pedal steady to ensure smooth and sufficient power for the car. Try to avoid shifting gears, stopping, or making sharp turns midway. While driving, look ahead and focus on distant fixed objects rather than the water surface to prevent visual disorientation and deviation from the intended water-crossing route.

6

2

Share

What Causes the CarPlay Central Control Screen to Go Black?

What is the maintenance case for an AMT transmission that does not upshift?

What are the causes of abnormal noise from the clutch pedal?

How Long After Registration Can You Take the Subject 1 Test?

What to Do When the Windshield Washer Fluid Freezes and Causes the Motor to Stop Responding?

Can You Lock the Car with Windows Open?

Is it okay if the car didn't stall when driving through a puddle?

Can a C1 Driver's License Operate a Motorcycle?

Does turning on the heater when starting the car consume more fuel?

How often should the Elantra's spark plugs be replaced?

Is the First Maintenance Required at Three Months?