What Causes the Car to Stall When Turning?

1 Answers
LaSienna
07/30/25 1:05am
Reasons why the car stalls when turning are as follows: Human factors: The engine power is insufficient to support the power consumption during turning, leading to stalling. Downshifting can be a solution. Engine malfunction: If caused by engine issues, it is recommended to seek professional repair services. Excessive carbon buildup: This could be due to a dirty throttle body or excessive carbon deposits in the intake tract. Use a computer to check the throttle opening and clean the throttle body or intake tract as needed. Ignition coil failure: Inspect the ignition system, especially the ignition coil, to see if there are any issues. If so, seek after-sales service.
Was this review help?
17
0
Share
More Forum Discussions

What is the fuel tank capacity of CB400?

CB400 has an 18-liter fuel tank. Below is relevant information about fuel tanks: 1. General classification: Fuel tanks can be divided into two types: open tanks and closed tanks. Open tanks have their liquid surface connected to the atmosphere, with an air filter installed on the tank cap. Open tanks are simple in structure, easy to install and maintain, and are commonly used in hydraulic systems. Closed tanks are generally used for pressurized tanks, filled with a certain pressure of inert gas, with inflation pressure reaching up to 0.05MPa. 2. Classification by shape: Fuel tanks can also be divided into rectangular tanks and cylindrical tanks. Rectangular tanks are easy to manufacture and convenient for placing hydraulic components, making them widely adopted. Cylindrical tanks offer high strength, light weight, and easy cleaning, but are more difficult to manufacture and occupy more space, often used in large metallurgical equipment.
17
3
Share

What does a turtle-shaped warning light mean?

A turtle-shaped warning light indicates a malfunction in the vehicle's engine or transmission system, and it is recommended to visit a 4S dealership for immediate repair. The transmission system of a vehicle includes the gearbox, clutch, drive shaft, and half-shaft. The gearbox is a crucial component in a vehicle, responsible for changing speed and torque. The power output from the engine passes through the gearbox before being transmitted to the wheels via the drive shaft. Common causes of engine or transmission system malfunctions include: 1. Severe engine carbon buildup; 2. Ignition system issues; 3. Unstable oil pressure; 4. Aging engine components. If you notice slight body vibration or deviation while driving, it may be caused by tire-related issues.
4
0
Share

Which Button is the Auto Hold?

Auto Hold has a dedicated activation button, which is the AUTO-HOLD key. Below is an introduction to the Auto Hold feature: Auto Hold: Auto Hold, also known as AUTO-HOLD, refers to an automatic braking function. Once activated, for example, when stopping at a traffic light, you don't need to pull the handbrake, simplifying the operation by avoiding the use of the handbrake or electronic parking brake. For automatic transmission models, it also eliminates the need for frequent shifting between D to N or D to P. Working Principle: The Auto Hold function uses a slope sensor to provide precise parking force via the controller. During startup, the parking control unit calculates information from sensors such as the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly.
7
2
Share

What is the fuel consumption per 100 kilometers for the Changan CS15?

The fuel consumption per 100 kilometers for the Changan CS15 is 8L. Below are the specific details regarding the fuel consumption of the Changan CS15: 1. Explanation: Most of the time, it is difficult to avoid congested road conditions, especially in urban areas where traffic jams are most common at intersections with many traffic lights. Frequent acceleration and deceleration while following other vehicles are also unavoidable, leading to particularly high fuel consumption under such conditions. It is recommended to develop a good habit of regularly checking the dashboard to spot any abnormalities early and address them promptly. 2. Fuel Consumption Calculation Explanation: Vehicle fuel consumption is calculated based on the amount of fuel consumed per 100 kilometers (usually referring to 100 kilometers). The method for calculating actual fuel consumption is: average fuel consumption = (total fuel added - last fuel added) / distance traveled.
8
3
Share

Where to Add Transmission Fluid for Audi Q5?

Audi Q5 transmission fluid is added on both sides of the transmission. When replacing automatic transmission fluid, most of the time the screw at the bottom of the automatic transmission oil pan is removed to drain the old fluid before adding new fluid. However, this method only replaces about 30% of the new fluid, leaving 70% of the old fluid still remaining in the transmission. If the oil pan is disassembled for fluid replacement, a 70% fluid replacement rate can be achieved, ensuring the health of the transmission. The Audi Q5 is equipped with a 7-speed Stronic dual-clutch transmission, with body dimensions of 4765mm in length, 1893mm in width, 1659mm in height, and a wheelbase of 2908mm. The sunroof of the Audi Q5 has an opening area of 1.27 square meters, extending from the front seats all the way to above the rear seats.
9
3
Share

How to Set the Memory Function for Power-Adjustable Seats?

Method for setting the memory function of power-adjustable seats: Turn the knob to the power-on position without starting the engine. Adjust the seat to the desired position, press the SET button on the door, and within 10 seconds, press any one of the three memory buttons. The memory button will remain illuminated for about 5 seconds. After hearing a confirmation sound, the memory setting is complete. Turn the knob to power off. The power seat memory function integrates the power-adjustable seat with the vehicle's onboard computer, enabling the seat to have memory capabilities and allowing intelligent management of the seat's information parameters. The main hardware components of the memory storage seat control system include motors, sensors, and the ECU. The control system uses the ECU as the core to connect various components and control seat position adjustments. The driver can adjust four positions of the seat: front and vertical lift, horizontal slide, and backrest angle.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.