What Causes the Car to Shake After Starting?

2 Answers
AsherLynn
07/28/25 8:12pm
The reasons for car shaking after starting: 1. Aging engine mounts: Engine mounts are usually made of rubber, and rubber products tend to harden over time with prolonged use. When rubber engine mounts age and harden, they can cause the engine to shake during operation. 2. Excessive carbon buildup in the throttle: Carbon deposits on the throttle can lead to unstable engine idling. 3. Poor performance in one of the cylinders: Check the spark plugs and ignition coils. Spark plugs are wear-and-tear parts that require regular replacement. 4. Poor fuel quality: Low-quality fuel has poor volatility. During a cold start, the engine block temperature is low, making it difficult for the fuel to atomize. This results in inadequate mixing of fuel and air in the cylinders, causing difficulty in starting and severe shaking of the car.
Was this review help?
12
4
Share
VanRicardo
08/12/25 1:00am
The issue of car shaking after starting is quite common in my years of driving experience. It's usually caused by worn-out spark plugs or carbon buildup leading to poor ignition; when I first bought a used car, it had similar symptoms, and replacing the spark plugs improved it significantly. Another common reason is a clogged air filter or a misfiring cylinder, causing engine vibration; if it's particularly noticeable during cold starts, it might be due to a dirty throttle body needing cleaning. My neighbor's car once shook due to a faulty fuel pump, which stabilized after being repaired. It's advisable to start troubleshooting from simpler causes, such as checking the spark plugs and fuel injection system, and avoid high-speed driving to prevent worsening the issue. Regular maintenance like cleaning carbon deposits can also prevent shaking.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

Will the car battery die if left unused for half a month?

If a car is left unused for half a month, the battery will not necessarily die. It depends on the condition of the battery. If the battery is in good condition, it can last for a month without issues. Battery or engine issues: If the battery status indicator remains lit, it indicates that the battery is not being charged. After starting the engine, the alternator will charge the battery, and the indicator will turn off. If the indicator remains lit even after starting the engine, there is a problem with the charging system, meaning the alternator is not generating electricity. This could be due to issues with the charging circuit, the battery itself, or the alternator. Charging system issues: Charging system problems are usually related to the alternator or the battery. The issue could be caused by a damaged alternator, a faulty battery, or poor electrical connections. It is advisable to first check the battery condition and the alternator's output. If these are normal, then inspect the wiring for any shorts or disconnections.
13
4
Share

What is the maximum allowable height for vehicles transporting containers from the ground?

Vehicles transporting containers must not exceed 4.2 meters in height. Measurement methods: The vehicle length is the distance between the two extreme points in the longitudinal direction of the vehicle, measured from the most protruding point of the front bumper to the most protruding point of the rear bumper. The vehicle width is the distance between the two extreme points in the transverse direction of the vehicle, i.e., the distance between the left and right most protruding points. According to industry standards, the vehicle width does not include the width of the extended side mirrors, meaning the width when the mirrors are folded. The vehicle height is measured from the ground to the highest point of the vehicle, excluding the length of the roof antenna. Related vehicle dimensions: The dimensions of the Peugeot 308 are similar to those of the 307. The domestic Peugeot 308 has dimensions of 4558mm in length, 1805mm in width, and 1505mm in height, with a wheelbase of 2612mm, showing slight increases in length, width, and height compared to the 307.
14
3
Share

Does Using Air Conditioning Affect Car Battery Charging?

Electric vehicles can use air conditioning while charging, but this is not recommended. The reason is that using the air conditioning during the charging process increases the internal charge load on the power battery pack of new energy electric vehicles, causing the battery pack to continue working before it is fully charged. This significantly accelerates the battery degradation of the power battery pack. Precautions for charging electric vehicles: 1. Correctly grasp the charging time: The battery charging time is about ten hours, and overcharging should be avoided. Plan charging stops in advance when preparing for a trip to avoid running out of power while driving. 2. Protect the charger: Try to avoid bumps and vibrations to the charger. To reduce costs, most chargers today are not designed for high vibration resistance. Many chargers experience internal potentiometer drift after vibration, leading to parameter drift and abnormal charging. Therefore, if you must move the charger, it is recommended to wrap it in plastic foam for protection.
2
0
Share

Is It Necessary to Install an Engine Guard?

It is necessary to install an engine guard. Below are the relevant details about engine guards: 1. Keeping the Engine Compartment Clean: Maintaining the cleanliness of the engine compartment is essential. While driving, the car inevitably passes through areas with a lot of dust. Installing an engine guard can prevent road water and dust from entering the engine compartment, keeping it clean. This also makes cleaning easier and reduces excessive oil sludge buildup. 2. Extending the Engine's Lifespan: Protecting the engine is crucial. When driving at high speeds, the car may kick up gravel and sand, which can significantly impact the engine over time. This can lead to engine malfunctions and shorten its lifespan. 3. Preventing Engine Scratches: An engine guard helps avoid scratches to the engine. When driving on uneven roads, the car might experience undercarriage scraping, which can damage the engine. With an engine guard in place, such scratches can be prevented, offering better protection. If the guard gets damaged, it can be easily replaced. However, repairing engine damage caused by undercarriage scraping can be costly.
12
3
Share

What Causes Engine Abnormal Noise When Engine Oil is Burned Out?

There are many reasons for abnormal engine noise when the engine oil is burned out, including excessively high oil viscosity, improper timing belt tension, incomplete gasoline combustion, exhaust system failure, and cooling system issues. If abnormal engine noise occurs, timely inspection and measures should be taken. Below is a detailed introduction to the causes of abnormal engine noise: 1. Unsuitable Engine Oil: Excessively high oil viscosity can lead to insufficient engine lubrication, causing friction. It is recommended that car owners choose the appropriate engine oil for their vehicles during maintenance to avoid this situation. 2. Timing Belt Abnormal Noise: Insufficient timing belt tension can cause the belt to stretch excessively under prolonged heavy load, resulting in abnormal noise. It is necessary to visit a repair shop to adjust the timing belt tension or replace it if the issue is severe. 3. Incomplete Gasoline Combustion: When poor-quality fuel is added to the car, the engine may not function properly. In such cases, it is necessary to refuel with high-quality gasoline.
13
1
Share

Why does the tire pressure monitoring light come on in cold weather when the tires have air?

Reasons why the tire pressure monitoring light comes on in cold weather but the tires have air: The tire pressure monitoring system has a false alarm; After a tire puncture, the air leaks slowly, causing the indicator light to come on; Encountering uneven road surfaces while driving causes different forces on the tires, leading to changes in tire pressure. What to do if the tire pressure is insufficient: If no damage is visible on the car's tires, simply inflate them to the normal pressure and reset the tire pressure system. If a puncture is found upon inspection, drive to a car repair shop promptly to have the tire patched before reinflating. If the tire pressure warning reappears some time after inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. How tire pressure monitoring works: It uses pressure sensors installed inside the tires to measure the air pressure, then transmits the pressure information wirelessly from inside the tire to a central receiver module.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.