What causes the car's anti-skid light to frequently illuminate?

Should Transmission Fluid Be Changed When It Turns Black?

Transmission fluid should be changed when it turns black. Here are some important considerations for changing transmission fluid: 1. Selection: It is essential to strictly follow the specified requirements when choosing transmission fluid. Opt for high-quality transmission fluid, preferably the original manufacturer's dedicated fluid. 2. Choose the appropriate viscosity: Selecting a viscosity that is too high can cause the friction surfaces to overheat and lead to unnecessary power loss. Conversely, choosing a viscosity that is too low may result in the fluid being thrown off the gear surfaces due to centrifugal force, potentially causing oil seal leaks. 3. Inspect the transmission fluid: Verify that the correct transmission fluid has been used. Using the wrong type of transmission fluid can also lead to poor engine performance.

19

0

Share

How to adjust the time on an 8th-generation Civic?

Method for adjusting the time on an 8th-generation Civic: 1. Press and hold the clock button until you hear a beep, then release the button. The time display will start flashing; 2. Set the hour by pressing and holding the preset button (H side) until the hour reading increments to the desired time; 3. Set the minutes by pressing and holding the preset button (M side) until the desired minutes appear; 4. Press the clock button to confirm the set time. The Civic is a compact car under Dongfeng Honda, with a wheelbase of 2700mm, front track of 1547mm, rear track of 1563mm. It is equipped with a 1.5T turbocharged engine and a 1.0T turbocharged engine.

1

Share

Do BYD Hybrid Vehicles Need to Pay Purchase Tax?

BYD hybrid vehicles are exempt from purchase tax. The following are the conditions for exemption: 1. Domestic sales: Pure electric vehicles, plug-in (including range-extended) hybrid vehicles, and fuel cell vehicles that are licensed for sale in China. The power batteries used do not include lead-acid batteries. 2. Fuel consumption: The comprehensive fuel consumption (excluding fuel consumption converted from electricity) of plug-in hybrid passenger vehicles must be less than 60% of the corresponding target value in the current national standard for conventional fuel consumption. The comprehensive fuel consumption (excluding fuel consumption converted from electricity) of plug-in hybrid commercial vehicles must be less than 60% of the corresponding limit value in the current national standard for conventional fuel consumption. 3. Compliance with standards: The vehicles must pass special inspections for new energy vehicles and meet the requirements of new energy vehicle standards.

17

0

Share

How to Reset the Maintenance Light on an Audi A3?

Audi A3 maintenance light reset method: 1. Locate the vehicle button on the home screen; 2. After clicking, select 'Settings and Services' from the pop-up page; 3. On the next page, continue by clicking 'Maintenance Interval'; 4. Click 'Reset Oil Change Interval' to complete the reset. The Audi A3 is a car produced by Audi, available in both hatchback and sedan body styles, both classified as compact cars. The dimensions of the Audi A3 hatchback are 4312mm in length, 1785mm in width, and 1426mm in height, with a wheelbase of 2629mm. The Audi A3 sedan measures 4462mm in length, 1796mm in width, and 1421mm in height, also with a wheelbase of 2629mm.

5

Share

Why is there a gasoline smell outside the car after starting the engine?

Reasons for the gasoline smell outside the car after starting the engine: 1. Unstable gasoline quality: Gasoline may be contaminated during transportation, and impurities from storage tanks can mix into the gasoline, severely affecting its quality; 2. Reduced air quality: High levels of pollutants in the air can lead to insufficient oxygen for gasoline combustion; 3. Unstable power supply: This can cause reduced ignition efficiency or weak spark intensity, preventing atomized gasoline from fully burning. Manual transmission car starting steps: 1. Ignition; 2. Fasten seat belt; 3. Press clutch and shift into first gear; 4. Release handbrake; 5. Turn on left turn signal, check for pedestrians, and honk to alert; 6. Slowly release the clutch, press the accelerator, and straighten the turn signal to complete the start.

2

4

Share

How to Reset the Maintenance Light on Peugeot 4008?

Peugeot 4008 maintenance light reset method: 1. Press and hold the 000 trip reset button while the engine is off; 2. After ignition, the odometer will start counting down; 3. When the display shows "Initialization Complete," the process is finished. The Peugeot 4008 is a compact SUV under Dongfeng Peugeot, with body dimensions of 4510mm in length, 1850mm in width, and 1628mm in height, a wheelbase of 2730mm, and a fuel tank capacity of 53 liters. The Peugeot 4008 is equipped with a 1.6T turbocharged engine, paired with a 6-speed automatic transmission, delivering a maximum horsepower of 170 HP, a maximum power of 125 kW at 5500 rpm, and a maximum torque of 250 Nm.

17

3

Share

What causes the car's anti-skid light to frequently illuminate?

Should Transmission Fluid Be Changed When It Turns Black?

How to adjust the time on an 8th-generation Civic?

Do BYD Hybrid Vehicles Need to Pay Purchase Tax?

How to Reset the Maintenance Light on an Audi A3?

Why is there a gasoline smell outside the car after starting the engine?

How to Reset the Maintenance Light on Peugeot 4008?

What does ECU mean in diesel vehicles?

How to Make the Windshield Wiper Spray Water?

Can a New Car Be Transferred?

How to Deal with Brake Pad Noise in Mercedes-Benz GLC?