What Causes the Car Radiator to Stop Circulating Water?

1 Answers
WyattLynn
07/28/25 7:30pm
Car radiator not circulating water may be due to a malfunctioning water pump or thermostat, or a blockage in the water passage. The lack of coolant circulation can significantly impact the engine and may easily cause engine damage. The car radiator, also known as the heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket in a continuous cycle, achieving the effect of heat dissipation and temperature regulation. As an essential part of the water-cooled engine's heat dissipation circuit, the radiator absorbs heat from the cylinder block to prevent engine overheating. Due to the high specific heat capacity of water, the temperature rise after absorbing heat from the cylinder block is not significant. Therefore, the engine's heat is transferred through the coolant liquid circuit, using water as the heat carrier, and then dissipated by convection through large-area cooling fins to maintain the engine's optimal operating temperature.
Was this review help?
3
0
Share
More Forum Discussions

Does Car Insurance Cover Water Damage?

Purchasing vehicle water ingress insurance can provide coverage. Here is an introduction to water ingress insurance: 1. Definition: Water ingress insurance, also known as auto loss insurance or special engine loss insurance, may have different names among insurance companies but the essence remains the same. It is a newly derived type of insurance, referring to an additional coverage purchased by the car owner specifically for the engine. 2. Function: It mainly provides compensation for engine damage caused by driving through waterlogged roads or after the vehicle is submerged. However, if the car owner forcibly starts the engine after submersion and causes damage, the insurance company will not provide compensation.
1
5
Share

What is the function of a steering wheel damper?

Steering wheel damper is used to improve stability during cornering. Introduction to dampers: A damper is a device that provides resistance to motion and dissipates kinetic energy. Various types of dampers (or shock absorbers) have long been used in industries such as aerospace, aviation, military, firearms, and automotive to reduce vibration and energy. Precautions for using dampers: Do not operate with insufficient installation strength: Operating with insufficient installation strength may cause mechanical damage and personal injury; ensure sufficient installation strength and safety factor for load torque; do not use as a stopping device.
17
4
Share

How to reset the maintenance light on Mazda Atenza?

Mazda Atenza maintenance light reset steps are as follows: 1. First, press the Atenza's one-touch start button. 2. Then press the INFO button on the left side of the multifunction steering wheel, followed by the SET button on the right side of the steering wheel. 4. At this point, the central LCD screen will display the vehicle maintenance information. 5. Finally, press the OFF button at the lower right of the steering wheel, and the wrench icon will disappear. The Atenza maintenance light can also be reset by connecting a diagnostic computer. This method is usually used by 4S shop maintenance staff to help us reset the maintenance light.
8
1
Share

Are Motorcycle Relays Universal?

Motorcycle relays are not universal; they are specialized. Definition of a relay: It is an electronic control device that consists of a control system (also known as the input circuit) and a controlled system (also known as the output circuit). It is commonly used in automatic control circuits and essentially functions as an automatic switch that uses a smaller current to control a larger one. Therefore, it plays roles such as automatic regulation, safety protection, and circuit switching in electrical circuits. Structural features of a relay: A relay typically has several main contacts, along with two coil contacts, resembling a contactor. The main contacts are connected to the controlled system, while the coil contacts are connected to the control system.
16
0
Share

What does small special passenger vehicle mean?

Small passenger vehicles refer to passenger cars with an approved seating capacity of 9 or fewer people. Below is relevant information: 1. Introduction: Small passenger vehicles generally refer to compact vehicles carrying 2-9 passengers, typically including sports cars, sedans, and microvans. Due to their compact size, they are well-suited for family and organizational use. They are generally distinguished from medium and large buses. 2. Advantages: The advantages of micro vehicles include affordable pricing, convenient maintenance, and lower fuel consumption. For commercially operated small passenger vehicles, the mandatory scrapping period is 15 years, while non-commercial small passenger vehicles have a scrapping period of 20 years.
4
2
Share

What causes the grinding sound when starting a cold engine?

Cold start grinding noise may be caused by the timing chain lacking lubrication during startup, which generally does not require repair. The reasons for grinding during startup are: 1. Weak battery; 2. Issues with the starter itself. Methods to check the fault: 1. Inspect whether the timing belt is broken or has frayed edges; 2. Check if the starter is misaligned or if the belt connected to the starter is aged or curled; 3. Examine the idle speed motor. It's best to determine whether the noise is from within the cylinder block. If not, it can generally be confirmed to be related to the vehicle's starting system.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.