What Causes the Car Not to Start and the Key Cannot Be Removed?

What does 'flooring the accelerator' mean in driving?

Flooring the accelerator means pressing the gas pedal all the way down when driving, making the pedal seem like it's stuck to the floor. It is not recommended for drivers to floor the accelerator for the following reasons: Flooring the accelerator not only compromises driving safety but also damages the car's engine and transmission, increasing fuel consumption. If wheel spin occurs, the operation should be stopped immediately. At this point, the vehicle speed is generally not high. To prevent further loss of control, avoid blindly applying the brakes; simply lifting the accelerator completely and stopping acceleration can usually restore control. Then, decide whether to brake based on the situation. Long-term flooring of the accelerator can have the following effects on a car: First, when the car is still cold, the engine oil cannot effectively lubricate all components. Although oil reaches various parts instantly upon engine start, this is residual old oil—limited in quantity, low in temperature, and overly viscous, making it unsuitable for immediate driving. Flooring the accelerator under these conditions forces the engine to work under load without adequate protection, potentially causing irreparable damage to components. Second, shifting gears only when the tachometer hits the redline during driving harms the transmission. The redline on the tachometer indicates the transmission's maximum tolerable limit. Frequent redline shifts can accelerate gear wear. Third, vehicle manufacturing standards vary by manufacturer, and some lower-quality cars are ill-suited for long-term aggressive driving. Aggressive driving tests the fuel system, lubrication system, cooling system, etc., requiring a comprehensive assessment of whether the vehicle can withstand such conditions. At least the above factors must be considered to preliminarily determine if long-term aggressive driving will affect the vehicle. To prolong the car's lifespan, avoid flooring the accelerator. Fourth, traffic and road conditions in many regions do not permit reckless flooring of the accelerator. Rapid acceleration is often followed by hard braking, which, like sudden acceleration, shortens the lifespan of brake pads and motors.

19

0

Share

Can You Still Drive When the Engine Fault Light Is On?

When the engine fault light is on, you should not continue driving. It is recommended to first identify the exact cause before taking any action, or seek assistance from a maintenance professional. Reasons for the engine fault light to illuminate include: 1. Poor gasoline quality leading to incomplete combustion of the air-fuel mixture in the cylinders, resulting in carbon deposits; 2. Excessive mileage causing weakened performance of the spark plugs; 3. Mechanical aging or damage of the vehicle; 4. Faults in the sensor or computer board. An engine is a machine capable of converting other forms of energy into mechanical energy. It can refer to both the power generation device and the entire machine including the power unit (such as gasoline engines and aircraft engines). Types of engines include internal combustion engines, external combustion engines, electric motors, etc.

16

0

Share

How Often Should You Change Your Car's Engine Oil?

How often you should change your car's engine oil depends on the type of oil. Mineral oil typically needs to be changed every six months or after driving about 5,000 kilometers; semi-synthetic oil should be changed every 7 to 8 months or after approximately 7,500 kilometers; and full-synthetic oil should be changed once a year or after around 10,000 kilometers. Engine oil consists of two main components: base oil and additives. The base oil is the primary ingredient of the lubricant, while the additives help compensate for and improve any shortcomings in the base oil's performance. The functions of engine oil include: 1. Reducing friction and high temperatures; 2. Minimizing gas leakage and preventing contamination from external pollutants; 3. Protecting parts from contact with water, air, and harmful acidic gases; 4. Buffering the pressure rise in the engine cylinder; 5. Cleaning away dirt generated on the surfaces of working parts.

14

1

Share

What is the weight of the Wuling Hongguang S3?

The weight of the Wuling Hongguang S3 ranges from 1380 to 1554 kg. The Wuling Hongguang S3 is a model under SAIC-GM-Wuling, with body dimensions of 4655mm in length, 1735mm in width, and 1780mm in height, a wheelbase of 2800mm, and a fuel tank capacity of 49 liters. In terms of suspension, the front suspension of this vehicle is a MacPherson independent suspension, while the rear suspension is a spiral spring non-independent suspension. Externally, the Wuling Hongguang S3 features a brand-new design, utilizing smooth, full-bodied lines and a layered design to highlight its three-dimensional and powerful appearance, with local designs that are robust and dynamic.

7

1

Share

Where is the OBD interface located in the Envision?

The OBD interface in the Envision is located under the steering wheel on the driver's side of the dashboard. OBD is a system that monitors the vehicle's operating status and provides timely feedback on abnormalities, primarily focusing on the engine condition and exhaust emissions. The Envision is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission. In terms of suspension, the vehicle features a front MacPherson independent suspension and a rear multi-link independent suspension. The Envision measures 4694mm in length, 1839mm in width, and 1686mm in height, with a wheelbase of 2750mm and a fuel tank capacity of 66 liters.

15

5

Share

Is it necessary to install an engine guard plate for a new car?

It is necessary to install an engine guard plate for a new car. The engine guard plate is generally installed under the chassis at the front of the car to prevent the engine from being bumped. There are several types of engine guard plates: 1. Iron guard plate; 2. Aluminum alloy guard plate; 3. Plastic-steel guard plate; 4. Plastic guard plate. The reasons for installing an engine guard plate are: 1. The engine is one of the core components of a car. Installing a guard plate outside it can block the impact force generated by flying stones hitting the engine when driving on uneven road sections; 2. During the use of the vehicle, it will encounter a lot of mud or dust. When driving in rainy weather, it is easy to corrode the car's chassis. After installing the engine guard plate, the engine can be better protected.

14

1

Share

What Causes the Car Not to Start and the Key Cannot Be Removed?

What does 'flooring the accelerator' mean in driving?

Can You Still Drive When the Engine Fault Light Is On?

How Often Should You Change Your Car's Engine Oil?

What is the weight of the Wuling Hongguang S3?

Where is the OBD interface located in the Envision?

Is it necessary to install an engine guard plate for a new car?

What are the reasons for uneven groove depths in the friction lining of a hoist?

What car has a square logo?

Should You Wash Your Car Before Applying a New Film?

Is it necessary to press the clutch before braking?