What causes the car lock icon to flash on and off?

1 Answers
OTimothy
07/29/25 11:30pm
The flashing car lock icon indicates that the anti-theft system is active. Here is a related introduction to the car anti-theft system: 1. Definition: The car anti-theft system is designed to prevent the theft of the vehicle itself or items inside the car. 2. Main function: It prevents unauthorized individuals from using the car's own power to steal the vehicle, i.e., it prevents illegal engine ignition. 3. Importance and components: The vehicle anti-theft system and the engine immobilizer system are essential for ensuring vehicle security. The anti-theft system consists of an electronically controlled remote or key, electronic control circuits, alarm devices, and actuators.
Was this review help?
19
1
Share
More Forum Discussions

What is the tire model used on the Tharu?

The tire models used on the Tharu are 225/60R16, 225/55R17, and 225/50R18. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling, often used under complex and demanding conditions. During driving, they endure various deformations, load forces, and high-low temperature effects, thus requiring high load-bearing performance, traction performance, and cushioning performance. Taking the 2021 Tharu 2WD Trend Edition as an example, it belongs to the compact SUV category, with body dimensions of 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2680mm. This model is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
12
0
Share

What is a vehicle's VIN code and where is it located?

The vehicle's VIN code is the Vehicle Identification Number, which consists of 17 characters, hence commonly referred to as the 17-digit code. It contains information such as the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. The VIN is generally visible at the bottom of the front windshield on the driver's side. The first to third digits of the VIN indicate the manufacturer, brand, and type; the second digit represents the car manufacturer code; the third digit is the vehicle type code; digits four to eight denote vehicle characteristics; the ninth digit is the check digit; the tenth digit indicates the model year; the eleventh digit represents the assembly plant; and digits twelve to seventeen are the serial number.
2
5
Share

How to Deal with Spots on Car Chrome Trim?

Methods to deal with spots on car chrome trim: 1. Hydrochloric Acid: Prepare a soft and clean cloth, then pour a small amount of hydrochloric acid onto the cloth. Gently wipe the areas with spots, repeating the process several times. Although using toothpaste to remove spots may require some patience, this method is relatively safe (other methods may be corrosive). 2. Toothpaste: Toothpaste can be considered a "universal remedy" because it has a grinding function. Although the process of removing spots with toothpaste may take some patience, this method is safer (other methods may be corrosive). 3. Carburetor Cleaner: Carburetor cleaner is used to remove stains and is the most effective method. However, it should be noted that due to its relatively strong corrosiveness, care must be taken not to let it drip onto the car paint during use, as it may cause varying degrees of damage.
15
2
Share

What are the steps for resetting the maintenance reminder on the Geely Vision X6?

The steps for resetting the maintenance reminder on the Geely Vision X6 are: 1. Press and hold the maintenance reset shortcut button on the instrument panel; 2. Depress the brake pedal; 3. Turn the car key to the ON position; 4. Release the maintenance reset shortcut button after the instrument panel lights up; 5. Press the OK button on the multifunction steering wheel to complete the process. The Geely Vision X6 is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 114 PS and a maximum torque of 235 Nm. Its body dimensions are: length 4546mm, width 1834mm, height 1715mm, with a wheelbase of 2661mm and a minimum ground clearance of 177mm.
7
5
Share

What Causes the Smell of Burning Engine Oil in Motorcycles?

Motorcycles emitting a smell of burning engine oil may be caused by worn piston rings or valve leakage. Burning Engine Oil: Motorcycle burning engine oil, commonly referred to as oil blow-by, primarily occurs due to increased clearance between the piston rings and the cylinder. During engine operation, this enlarged gap allows oil to enter the combustion chamber. Another critical factor is issues with the valves, valve guides, or valve stem seals—any of these components malfunctioning can also lead to engine oil burning. During repairs, parts should be replaced based on the actual condition. Solutions: Replace the piston rings and valve stem seals (when replacing piston rings, pay special attention to the ring gap to avoid reoccurring oil blow-by from misalignment). Additionally, conduct a thorough inspection of the valves. If uncertainty remains about resolving the issue, consider replacing the valves as well. Neglecting repairs can impair the engine's power performance, as unburned oil in the cylinder fails to contribute to combustion, thereby reducing engine efficiency.
19
4
Share

What are the causes of valve leakage?

Here are the causes of valve leakage: 1. Wear, burning, spots or depressions, and carbon deposits on the working slope of the valve and valve seat ring. 2. Excessive clearance between the valve stem and valve guide, causing the valve stem to wobble or bend, or the valve head to tilt, resulting in incomplete valve closure. 3. Weakened or lost elasticity of the valve spring or a broken spring can also prevent the valve from tightly fitting with the valve seat. 4. Small valve clearance causes the valve stem to expand when heated, and the tappet and rocker arm push the valve open, preventing it from fully closing and leading to leakage. 5. Prolonged operation of the engine at high speed and temperature weakens the valve spring tension, preventing the valve head from pressing tightly against the valve seat. 6. Failure of the decompression mechanism, causing the valve to close incompletely.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.