What Causes the Car Engine Warning Light to Illuminate?

2 Answers
KimberlyFitz
07/24/25 10:55am
Car engine warning light illuminates due to unclean engine cylinders, poor combustion state, and low-quality fuel. The specific details are as follows: Unclean engine cylinders with carbon deposits: Over time, the engine interior will inevitably accumulate carbon deposits. These deposits alter the engine's design parameters and are thermally unstable, retaining heat that can cause engine knocking without ignition. In such cases, the engine warning light will turn on. Timely engine cleaning is the solution. Poor combustion state: Poor combustion is a primary reason for the engine warning light. In automotive design, oxygen sensors are installed to monitor the engine's combustion state, ensuring optimal performance and longevity. Poor combustion not only pollutes the environment but also leads to fuel wastage and excessive engine wear. Solution: Install an oxygen sensor. Low-quality fuel: Engines have specific requirements for gasoline quality, especially as engine demands increase, necessitating higher fuel standards. The solution is to use higher-quality gasoline.
Was this review help?
16
5
Share
Felicity
08/11/25 5:55am
Last time my car's engine light came on and it really freaked me out. I rushed to the auto repair shop where the experienced mechanic checked it and said there are usually three common issues: either the exhaust system is clogged with too much carbon buildup in the catalytic converter; or the spark plugs are worn out causing ignition problems, which you can feel as jerky acceleration; or the oxygen sensor got damaged by poor fuel quality. This light is actually called the MIL (Malfunction Indicator Lamp), specifically monitoring the emissions system - never ignore it when it lights up. I learned this the hard way by assuming it was a false alarm, only to see my fuel consumption skyrocket two weeks later, costing me an extra 2,000 yuan in repairs. The safest approach is to buy an OBD scanner to plug into the port under the steering wheel and read the trouble codes, or at least drive to a professional shop for diagnosis immediately.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Which Vehicle Management Office Handles Motorcycle Registration in Xi'an?

Motorcycle registration can be processed at the Chang'an Branch of the Vehicle Management Office or the vehicle management offices of the traffic police brigades in each district and county. 1. Services Available: Starting from April 20, 2020, applicants with Xi'an household registration or a residence permit from any location in the city can apply for initial motorcycle driver's licenses or additional driving permissions at the Chang'an Branch of the Vehicle Management Office or the vehicle management offices of the traffic police brigades in each district and county. 2. Obtaining a License: The process for obtaining a motorcycle license in Xi'an has been simplified. Simply search for the official WeChat account "Xi'an Local Treasure," follow it, and reply with "motorcycle" to view the methods, addresses, required materials, and procedures for obtaining a motorcycle license in Xi'an.
3
2
Share

Is it necessary to register a car's wheel replacement?

Replacing the car's wheels does not require registration as long as the size of the new wheels is consistent with the original ones. However, if the size is changed, it will not pass the annual inspection, and registration is required. For registered motor vehicles, wheels of different styles and materials can be replaced, but the specifications of the wheels cannot be altered. According to the motor vehicle registration regulations, any changes to the body color, model, performance, purpose, or structure of a licensed vehicle, including replacing the frame, body, or engine, must be reported to the vehicle management office for registration modification. Before modifying the wheels, it is advisable to consult the vehicle management office to understand the situation; otherwise, the annual inspection may not be passed, and the vehicle may be required to be restored to its original condition. If the wheels are replaced with the same size, the annual inspection is generally passable, but the appearance should not change too much unless local policies are very strict.
19
1
Share

How to Disable the Anti-lock Braking System?

The anti-lock braking system in the vast majority of civilian vehicles cannot be disabled. The ABS (Anti-lock Braking System) is enabled by default and remains on standby at all times unless a malfunction occurs. Whenever the vehicle shows signs of wheel lock-up, the ABS system intervenes to prevent the wheels from locking. If the wheels were to lock up, the rolling friction between the wheels and the road would turn into sliding friction, making it impossible to steer the vehicle with the steering wheel and greatly increasing the risk of a traffic accident. The Anti-lock Braking System, abbreviated as ABS, is an active safety feature in vehicles. In cars equipped with ABS, when a wheel is about to reach the point of lock-up, the brake fluid pressure causes the system to cycle rapidly, acting 60 to 120 times per second. This is equivalent to continuously applying and releasing the brakes, similar to the mechanical 'cadence braking'.
3
4
Share

How to adjust the clock on Land Rover Discovery 4?

The steps to adjust the clock on Land Rover Discovery 4 are as follows: 1. First, start the vehicle, then press the SET button on the left side of the multifunction steering wheel to enter the time setting. 2. Then use the + or - buttons on the left side of the multifunction steering wheel to adjust the time. Here is more information about the Land Rover Discovery 4: 1. Model: The fourth-generation Land Rover Discovery is a model developed by Land Rover, with its body-on-frame structure indicating that it belongs to the true ORV hardcore off-road vehicle category. 2. Exterior: The front grille features a hollowed-out design that makes it more stylish, with smoother corners compared to the Discovery 3, and the headlight assembly incorporates the currently popular LED design.
11
0
Share

How to Remove the Rear Seats of the Buick Verano?

Method for removing the rear seats of the Buick Verano: 1. There is a pull strap in the middle of the rear seat of the Buick Verano. Pull the strap, and the inner side can be flipped upward to remove the rear seat; 2. After removing the rear seat, there are also hooks on both the left and right sides of the rear seat that need to be removed; 3. First, remove the hook on the left side; 4. Then remove the hook on the right side; 5. The backrest has a release mechanism near the door. Pull the handles on both sides to fold down the backrest; 6. Note that the rear seat seatbelt also needs to be unlatched. This completes the removal of the rear seat. The Buick Verano has dimensions of 4723mm in length, 1802mm in width, and 1466mm in height, with a wheelbase of 2700mm. The body type is a 4-door, 5-seater sedan.
12
5
Share

How to Use the One-Button Start in Audi Q3?

Audi Q3's one-button start is located at the lower left corner of the central control screen. Below are the methods for one-button start: 1. Start/Turn off the engine: (1) Start: Press the brake pedal firmly and press the ignition button. When starting the engine, high-power-consuming electrical appliances will be temporarily turned off. (2) Turn off: After parking the vehicle, press the start button again to turn it off. 2. Turn on/Turn off the power: (1) Turn on: Press the ignition switch directly without stepping on the brake pedal. (2) Turn off: Press the button once more, and the engine tachometer pointer will return to the OFF position. 3. Correct gear shifting sequence when turning off the engine: ① Park → ② Step on the brake → ③ Shift to N gear → ④ Release the brake → ⑤ Pull the handbrake → ⑥ Turn off the engine → ⑦ Shift to P gear (Note: For parking on a slope, swap the order of ④ and ⑤).
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.