What Causes the Car Display Screen to Go Black?

How to Time a Cruze?

The first method for timing a Cruze is as follows: 1. Align the crankshaft according to the marks on the crankshaft timing pulley, generally requiring the No. 1 cylinder piston to be at top dead center. 2. Install the camshaft timing pulley and align the marks on the camshaft. For dual camshafts, align both camshaft positions separately. 3. Install the timing belt or chain properly. The second method for timing a Cruze is as follows: 1. Rotate the engine to bring cylinders 1 and 6 to top dead center. 2. Assemble all gears except the camshaft gear, aligning the marks on the camshaft gear with the marks on the engine block. 3. Rotate the engine to approximately 22 degrees before top dead center. 4. Adjust the fuel injection pump and tighten the locking screws.

17

0

Share

How to turn off the built-in navigation in Tiguan L?

The settings in Tiguan L's navigation system allow you to turn off traffic alerts or use the stop function by pressing the navigation button. More information about Tiguan L is as follows: 1. Tiguan L continues the exterior and interior design of the 2017 model, with the biggest change being the powertrain. Tiguan L replaces the 1.8T engine in the 2017 330TSI model with a 2.0T engine, delivering a maximum power of 137 kW and peak torque of 320 Nm. After the upgrade, the 2018 Tiguan L will all be equipped with a 2.0T powertrain. 2. The 2019 Tiguan L will come standard with keyless entry, one-button start, electronic parking, and other features; a new Panorama Comfort Edition is introduced, equipped with 18-inch two-tone precision alloy wheels and a Panorama panoramic electric sunroof; the Intelligent Luxury Edition includes 19-inch two-tone precision alloy wheels, a smart electric tailgate with delayed closing and memory function, PLA 3.0 intelligent parking assist system, and other advanced technologies.

1

4

Share

What is the tire pressure for Changan CS55?

Changan CS55 generally has a tire pressure of 2.4 to 2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The tire pressure of Changan CS55 can be viewed on the display screen in the middle of the dashboard. The tire pressure monitoring of CS55 does not require manual activation; it automatically turns on when the vehicle starts. Press the scroll button on the left side of the steering wheel to find the tire pressure value. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. It usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor. The tire pressure sensor, used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it can also cause the tire pressure fault light to come on. For sensor damage issues, only a complete replacement with a new part is possible.

11

5

Share

How to Open the Honda Civic Fuel Tank Cap?

Honda Civic's fuel tank cap and trunk lid share the same lever. Press down to open the fuel tank cap and pull up to open the trunk. More information about the Honda Civic fuel tank is as follows: 1. The Dongfeng Honda Civic has a fuel tank capacity of 47L, uses 92-octane gasoline, features direct fuel injection, has a displacement of 998ml, and complies with the National V (China 5) emission standards. 2. The fuel tank capacity stated in the Dongfeng Honda Civic manual is smaller than the actual refueling volume. The fuel tank volume specified by the car manufacturer is from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for the expansion of fuel inside the tank when temperatures rise, preventing overflow and ensuring safety.

1

0

Share

What is the normal level for coolant?

Coolant should be filled to the middle position between the upper mark (MAX) and lower mark (MIN) on the reservoir. The method for replacing coolant is as follows: Before completely replacing the coolant, conduct a comprehensive inspection to check for any signs of leakage or cracks in the pipes, with special attention to the five-way water pipe. The coolant flows through the five-way pipe and is then distributed to different parts of the vehicle to function. If there is any leakage of coolant in this section, replace the water pipe or resecure the connection as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue filling the reservoir with water to allow it to flow continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink color. Continue adding clean water until the drained water runs clear. Note: Remember to disconnect the heater hose and drain all water from the heater core. After draining for about an hour, add new coolant through the radiator hose. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as air is expelled from the cooling system. Add more coolant until it reaches the highest mark "MAXT" on the reservoir.

8

5

Share

What methods can be used to find lost keys?

Keys can be found using a key finder when they are lost. Introduction to key finders: A key finder consists of a locator and a signal receiver, which operate based on Bluetooth signal transmission. Simply attach the signal receiver to your key, and when you can't find the key, press the designated button on the locator. The signal receiver will emit a beeping sound, allowing you to locate the key by following the sound. The sound is clear and audible within a certain range. Methods to prevent losing keys: Do not place keys in your back pocket. Avoid leaving keys in random places where they can easily fall into corners, under beds, or into trash bins, risking being discarded as garbage. Always store keys in your bag. Never forget to remove the keys after use and place them back in your bag; otherwise, they can easily be taken by others. Attach a string or lanyard to your keys.

16

5

Share

What Causes the Car Display Screen to Go Black?

How to Time a Cruze?

How to turn off the built-in navigation in Tiguan L?

What is the tire pressure for Changan CS55?

How to Open the Honda Civic Fuel Tank Cap?

What is the normal level for coolant?

What methods can be used to find lost keys?

How to Use Cruise Control on the Buick Excelle?

Difference between Audi S and RS series?

What Brand is Haval?

What does the H indicator light on the dashboard mean?