What Causes the Car Body to Be Slanted When Reversing into a Parking Space?

Can You Skip Gears When Downshifting in Subject 3?

Subject 3 test allows skipping gears when downshifting, but not when upshifting. During the Subject 3 test, before shifting gears, you must first adjust the speed to match the target gear, and then proceed with the gear shift. Many situations, such as stopping at intersections, require skipping gears when downshifting. Operation of Skipping Gears When Downshifting in Subject 3: To downshift, first decelerate; to decelerate, first brake. Release the accelerator pedal, smoothly brake to reduce the speed to the range suitable for the lower gear, press the clutch pedal, shift the gear lever into the lower gear, then gradually release the clutch until the left foot completely releases the clutch, and then you can press the accelerator to control the car speed under the new gear. When downshifting, you must shift down one gear at a time; skipping gears is not allowed. Test Tips for Skipping Gears When Downshifting in Subject 3: Starting gear control: The starting gear should be first gear. Shift gears step by step; skipping gears is strictly prohibited, otherwise the test recorder will note it and deduct points. Gear shifting must be quick: The key to shifting gears is speed, completing the actions of pressing the clutch, shifting gears, and pressing the accelerator as quickly as possible. Gear shifting must be stable: When shifting gears, the clutch must be fully pressed, and the gear shift should only occur when the vehicle reaches a certain speed range. Keep your eyes on the road when shifting gears: At no time should you look down at the gear lever while shifting; doing so will be considered a failure.

20

4

Share

Can traffic violation points be handled on a mobile phone?

Traffic violation points can be processed on a mobile phone. The party involved needs to download the Traffic Management 12123 mobile app, log in, and follow the relevant prompts to handle the violation. Methods for handling traffic violations: Enter the basic information of the vehicle, including the license plate number, engine number, etc. Verify the mobile phone number of the bound vehicle owner via SMS. Upload three on-site photos (one of the person holding their ID card, one of the vehicle owner holding their ID card and the vehicle registration document to be bound, and one of both the person's and the owner's ID cards and the registration document together). The vehicle owner will then receive an SMS verification code. After verifying their identity and submitting, wait for the traffic management department's backend review to successfully complete the binding. Regulations of the Road Traffic Safety Law: The party involved should pay the fine at the designated bank within fifteen days. If a motor vehicle driver's points do not reach 12 within a scoring cycle and the fine has been paid, the points will be cleared. If the points do not reach 12 but there are unpaid fines, the points will carry over to the next scoring cycle. Fines for pedestrians, passengers, and non-motor vehicle drivers can be collected on the spot if the party involved has no objections. Fines should be issued with a unified receipt from the provincial, autonomous region, or municipal finance department; if such a receipt is not provided, the party has the right to refuse to pay the fine.

18

5

Share

How to clear the maintenance reminder on the new Focus?

For the new Focus, you can visit a 4S dealership to clear the maintenance reminder. Below is relevant information about the new Focus: 1. Product Introduction: The all-new Focus 2020 model was officially launched by Changan Ford on July 11, 2019. As an annual facelift model, the new-generation Focus 2020 maintains the same pricing as the previous version but complies with the China VI emission standards across all variants. Additionally, the mid-range models are equipped with ST-Line sports kits, and the configurations have been upgraded. 2. Exterior Design: In terms of exterior design, the all-new Focus retains the body dimensions of the current model, measuring 4534 mm in length (4368 mm for the 5-door version), 1823 mm in width, and 1483 mm in height. It features the widest body in its class, enhancing the interior lateral space of the new Ford Focus.

3

0

Share

What are the symptoms of a faulty ball joint in the control arm?

The manifestations of a faulty lower control arm ball joint include the following categories: 1. The vehicle's tires will abnormally wobble during driving, leading to irregular tire wear, accompanied by relatively loud noise. 2. When accelerating, the steering wheel will vibrate, and there will be noises from the chassis when driving on bumpy roads. 3. A "clunking" abnormal sound will come from the steering wheel. Since the lower control arm is part of the steering system, a damaged lower control arm bushing directly affects the vehicle's dynamic driving performance, causing the vehicle to pull to one side, significant wear affecting steering adjustment, which is highly detrimental to safety. In such cases, it is recommended to visit a repair shop for relevant inspections and perform a four-wheel alignment after adjustments.

11

5

Share

What is the bulb model for the Everest's headlights?

Ford Everest uses H7 for low beam and HB3 for high beam. Here is relevant information about the Everest: 1. Product Introduction: The Ford Everest is an ORV (Off-Road Vehicle) with a body-on-frame construction. This highly anticipated rugged SUV is locally produced in China by Ford's joint venture Jiangling Motors and sold through Ford brand authorized dealership networks under Jiangling. 2. Body Dimensions: Regarding body dimensions, the Everest measures 4892mm in length, 1862mm in width, and 1837mm in height, with a wheelbase of 2850mm. Due to its ladder-frame chassis structure, the Everest has a noticeably tall profile. It also boasts an impressive 227mm ground clearance and 800mm wading depth, outperforming other vehicles in its class.

4

Share

What Restrictions Do Not Apply to Sweeper Vehicles?

Road maintenance vehicles and engineering operation vehicles are not restricted by traffic signs and markings in terms of their driving routes and directions while performing tasks, provided that they do not affect the passage of other vehicles. Passing vehicles and pedestrians should yield the right of way. Water sprinklers, sweeper vehicles, and other motor vehicles should operate according to safety standards; they are not restricted by lane division regulations when not affecting other vehicles' passage, but they must not drive in the opposite direction. Fire Hazard Precautions: When maintaining road sweeper vehicles, flammable materials such as oils and cleaning agents are often used. It is essential to follow standard operating procedures and implement fire prevention measures, keeping a fire extinguisher on hand to prevent fires. Do not smoke or ignite flames near the fuel tank or battery, as flammable gases from the fuel tank and hydrogen from the battery can easily catch fire. Burn Hazard Precautions: After the vehicle has been in use for some time, components such as the radiator, exhaust pipes, power steering fluid reservoir, and spark plugs can become very hot. Avoid contact to prevent burns. Mechanical Injury Precautions: Before starting the vehicle, check the initial gear position to avoid collisions caused by excessive starting speed. When working under the engine hood, clear the cab to prevent accidental injury from sudden engine movement or others' operational errors. Avoid Damaging the Sweeper Vehicle: Take care not to damage the road sweeper vehicle, especially to prevent brake fluid leakage. Brake fluid can damage the vehicle's paint film and, if accidentally splashed into the eyes, can impair vision or even cause blindness. In case of accidental exposure, rinse immediately with clean water.

6

3

Share

What Causes the Car Body to Be Slanted When Reversing into a Parking Space?

Can You Skip Gears When Downshifting in Subject 3?

Can traffic violation points be handled on a mobile phone?

How to clear the maintenance reminder on the new Focus?

What are the symptoms of a faulty ball joint in the control arm?

What is the bulb model for the Everest's headlights?

What Restrictions Do Not Apply to Sweeper Vehicles?

What is the fuel consumption of the Tang DM-i in a depleted battery state?

What are the standard requirements for fire truck turnaround areas?

What is the definition of an ADV motorcycle?

What to Do When 12 Points Are Deducted at Once?