What Causes the Car Battery Indicator Light to Illuminate?

1 Answers
SanJade
07/28/25 9:43pm
The reasons for the car battery indicator light illuminating are: 1. Loose battery terminals or battery cables; 2. Battery discharge or damage; 3. Abnormal generator charging; 4. Fuse and relay failure. Solutions for the car battery light illuminating include: 1. Inspect and tighten the battery terminals; 2. Charge the battery; 3. Check and replace the generator regulator; 4. Inspect the fuse for burnout, and replace it if damaged. Other dashboard indicator lights include: 1. Tire pressure monitoring indicator: Monitors tire pressure in real-time; 2. Parking indicator: Illuminates when the parking lever is engaged; 3. Oil indicator: Displays the oil pressure condition within the engine.
Was this review help?
17
3
Share
More Forum Discussions

How to Change Tires on a Car with Tire Pressure Monitoring?

The method for changing tires on a car with tire pressure monitoring is: 1. Park the car, turn off the engine, and engage the handbrake; 2. Power on the car but do not start the engine; 3. Simultaneously press and hold the lock and unlock buttons on the remote control for 5 seconds until you hear two short beeps from the car; 4. Reset the tire pressure for each tire in the order of front left, front right, rear right, and rear left; 5. After setting the tire pressure for the last tire, the car will immediately emit two short beeps. The full name of the tire pressure monitoring system is the Tire Pressure Monitoring System (TPMS). Its function is to automatically monitor the tire pressure in real-time while the car is in motion and alert the driver to any tire leaks or low pressure to ensure driving safety.
10
0
Share

What is the bulb model of Baojun 560?

The bulb models of Baojun 560 are: the low beam bulb model is h7, and the high beam bulb model is h11. The replacement method for the low beam: 1. Unplug the power socket of the bulb; 2. Remove the waterproof cover behind the bulb; 3. Take the bulb out of the reflector; 4. Place the new bulb into the reflector, aligning it with the fixing position; 5. Reattach the waterproof cover and plug in the bulb power. Baojun 560 is a compact SUV launched by SAIC-GM-Wuling, with dimensions of 4620mm in length, 1820mm in width, and 1755mm in height, and a wheelbase of 2750mm. It is equipped with a 1.5T turbocharged engine and a 1.8L naturally aspirated engine, with maximum power outputs of 110kw and 101kw respectively, paired with a 6-speed manual transmission, a 5-speed AMT, or a 6-speed dual-clutch transmission.
8
3
Share

How to Remove Odors in the Car?

The methods to remove odors in the car are: 1. Place some fruits or fruit peels in the car, such as orange peels, grapefruit peels, lemons, etc. Fruits can emit a unique fruity fragrance, which can improve the air quality in the car, but they should not be left for a long time; 2. Place some bamboo charcoal bags, which can absorb toxic substances like formaldehyde, benzene, and sulfur dioxide in the car, and also remove certain odors; 3. Place some fresh flowers, tea leaves, car perfumes, and agarwood pendants in the car, which can effectively reduce odors; 4. Use a car air purifier, which can filter the air in the car and also effectively reduce odors.
10
1
Share

How to adjust the rearview mirrors of Wuling Hongguang S?

The method to adjust the rearview mirrors of Wuling Hongguang S: 1. Left side: Adjust so that you can just barely see the edge of the car, with the horizon positioned in the middle vertically; 2. Right side: Adjust so that you can just barely see the edge of the car, with the horizon positioned in the middle vertically; 3. Interior rearview mirror: Adjust to see the center of the entire rear window. The Wuling Hongguang S is a vehicle launched by SAIC-GM-Wuling, with dimensions of 4390mm in length, 1660mm in width, and 1750mm in height, and a wheelbase of 2720mm. It is equipped with two naturally aspirated engines, 1.2L and 1.5L, with maximum power outputs of 56kw and 73kw respectively, paired with either a 6-speed manual or a 5-speed manual transmission.
15
3
Share

How to Clean Tree Sap from the Car Body?

The methods to clean tree sap from the car body are: 1. Pour warm water onto a cleaning cloth, cover the areas with tree sap on the car body, wait for a while until the sap melts, then wipe it off; 2. Directly dip alcohol and wipe, as alcohol can dissolve and remove tree sap; 3. Apply undiluted dishwashing liquid to the car body, let it soak for a while, then rinse with water; 4. Use a clay bar to wipe and remove, as clay bars have strong cleaning power and also provide some polishing effect; 5. Use tar and asphalt cleaner or specialized tree sap remover for cleaning; 6. Wash with a soapy water solution, then wipe with a cloth.
18
1
Share

How to Remove Spray Paint from a Car?

Methods to remove spray paint from a car include: 1. Using olive oil—if you have olive oil at home, apply some to the painted area and gently rub it a few times; 2. Using floral water—apply floral water to the painted area, rub a few times, and let it sit for 5 minutes before removing; 3. Using peanut oil or salad oil—apply peanut oil or salad oil to the painted area, add some dish soap, and gently rub. Spray paint does not have a strict classification standard. It can be categorized by the main film-forming substances in aerosol paint, such as nitro-based aerosol paint, alkyd-based aerosol paint, thermoplastic acrylic aerosol paint, etc. It can also be classified by the film-forming effect, such as ordinary spray paint, metallic glitter spray paint, fluorescent spray paint, super metallic color spray paint, chrome spray paint, gold spray paint, hammered spray paint, high-temperature resistant spray paint, etc.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.