What Causes the Car Air Conditioning Fuse to Keep Blowing?

2 Answers
CharlotteAnn
07/23/25 7:56pm
If the fuse keeps blowing, it may indicate an abnormal circuit condition. It is recommended to promptly contact the nearest service station for inspection. In a car's electrical system, numerous electrical devices are connected by wires of different colors, among which the fuse is the most critical component not to be overlooked. The reasons for a car fuse blowing are as follows: 1. Improper sealing of the fuse box: When cleaning the engine compartment, because the fuse box is not properly sealed, remember never to rinse the fuse box directly with water. This can easily cause a short circuit in the fuse, leading to failure of the entire vehicle's electrical components. Most fuse boxes have a prominent "No Water Rinse" warning sign; 2. Excessive power when replacing headlights: For fuses that are prone to blowing, immediately replace them with higher-current fuses and power cables to prevent excessive current and overheating; 3. High-power audio systems may also cause fuses to blow: When installing high-power electrical devices, always pay attention to the current level and immediately replace the corresponding fuse.
Was this review help?
1
1
Share
StOmar
08/10/25 5:53pm
I've driven many cars, and fuses often blow, especially during summer when the air conditioning is used frequently. Possible causes include a faulty AC compressor or fan motor, which can lead to overloading due to excessive current. Alternatively, it could be due to aged or damaged wiring causing a short circuit, or loose wire connections. Check the components of the AC system, such as whether the fan is rotating properly. If the fuse keeps blowing, don't replace it with a larger one yourself, as it might damage more components. It's best to service the AC regularly, cleaning out dust to prevent jamming. Before driving in hot weather, test if the AC starts normally. If you notice any issues, get the compressor and electrical circuits checked at a professional repair shop early to avoid safety hazards on the road. Safety always comes first—better safe than sorry.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

Why won't the automatic transmission car start in P gear?

Here are the reasons and solutions for an automatic transmission car not starting in P gear: 1. The car is low on oil; it is necessary to promptly add oil that meets specifications, and regularly check the oil gauge. 2. The car has a dead battery; it needs to be charged in time. 3. The starter motor is faulty; the issue of not being able to start can be resolved by promptly going to the car's 4S shop for inspection and repair of the starter motor. 4. During cold starts, the throttle may be blocked by carbon deposits, preventing sufficient air from entering to start the engine, so the engine won't start. Pressing the accelerator slightly to increase the throttle opening can help, and it is also recommended to clean the throttle. 5. Not adding antifreeze may also cause the car not to start. Some car owners add water or inferior antifreeze to their cars, leading to extremely cold conditions in winter where the entire water circuit freezes, the engine cracks, the car's water pump fails to operate, the car won't start, and other engine components are damaged. Promptly replacing with antifreeze that meets specifications can solve the problem.
15
4
Share

What does the roof light 'door' mean?

The roof light 'door' refers to the automatic lighting function, which is a feature of the reading light (also known as the dome light). Below are the functions of the 'door' light: 1. When the 'door' button is activated, the reading light turns on as the car door opens. 2. After the car door is closed, the light delays before turning off. 3. If the car door is not properly closed, the light remains on, serving as a warning. 4. The main purpose is to facilitate getting in and out of the car at night. Below is additional information about the 'door' light: 1. 'Door' in Chinese means 'door'; the light turns on when the door opens and off when it closes or the car is locked. 2. There are two buttons nearby, labeled 'ON' and 'OFF'. 3. 'ON' means the light stays on continuously; the interior reading light remains illuminated. 4. 'OFF' means the light stays off continuously; pressing 'OFF' keeps the interior reading light off. 5. Some car models use three positions to differentiate, representing 'ON', 'OFF', and 'door'. 6. If it's a button, simply press it; if it's a position, slide it to the corresponding position.
5
4
Share

What is the calculation method for gear tooth width?

Here is a detailed introduction to the calculation of gear tooth width: 1. Calculation formulas: For helical gears, the coefficient is 0.4; for herringbone gears, the coefficient ranges from 0.5 to 1.0; for straight bevel gears, tooth width = gear coefficient × outer cone distance; for worm gears, tooth width = 0.65 × worm pitch diameter. A larger tooth width coefficient results in a wider gear, which increases the gear's load-bearing capacity but also leads to uneven load distribution along the tooth direction. 2. Classification: Gears can be classified based on tooth profile, gear shape, tooth line shape, the surface where the teeth are located, and manufacturing methods. The tooth profile of a gear includes the tooth curve, pressure angle, tooth height, and modification angle.
13
4
Share

How to Clean Water Scale on a Car?

Here are detailed methods for removing water scale from a car: 1. Toothpaste: Apply an appropriate amount of toothpaste to the water stain area and wipe repeatedly with a soft towel. 2. Cleaning clay: Purchase a piece of cleaning clay and use it to wipe the car before drying. 3. Computer screen cleaning kit: Spray the liquid used for cleaning computer screens and then wipe. 4. Dishwashing liquid: Apply an appropriate amount, gently rub with fingers, and rinse off. 5. Automotive glass cleaner: Effective for stains caused by insect remains, bird droppings, and resin. 6. Hydrochloric acid: Dilute in a plastic container and scrub.
13
5
Share

How to Lock Car Windows with the Key Fob?

Hold down the lock button on the key fob, and all four windows and the sunroof will automatically close. Below are detailed instructions for the one-touch window operation: 1. Short press: The window will automatically roll down completely. 2. Short pull: The window will automatically roll up completely. 3. Long press: Release the button during window descent to stop the window. 4. Long pull: Release the button during window ascent to stop the window. 5. Long press the unlock button: Press and hold the unlock button to automatically lower all four windows. 6. Long press the lock button: Press and hold the lock button to automatically raise all four windows.
7
4
Share

Where is the handbrake of the XRV?

Honda XRV is equipped with an electronic handbrake, which is located next to the gear lever. Here is some relevant information: 1. The electronic handbrake is also known as the Electronic Parking Brake (EPB). The Electronic Parking Brake (EPB) integrates the temporary braking during driving and the long-term braking after parking, and it is controlled electronically to achieve parking braking. 2. The working principle of the electronic parking system is the same as that of the manual mechanical parking brake system, which achieves parking by clamping the brake shoes with the brake drum or the friction plates with the brake disc. However, the control method is replaced by electronic buttons and motor actions instead of manual operation and mechanical linkage, so the system is fully called the Electronically Controlled Mechanical Parking Brake System.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.