What Causes the Car Air Conditioning Compressor to Stop Working?

1 Answers
SanKiara
07/30/25 10:37am
Car air conditioning compressor not working is due to severe internal wear of the compressor, leading to its inability to function properly. It's important to understand that the compressor plays a crucial role in the air conditioning system, primarily responsible for compressing and delivering refrigerant. This results in the compressor operating at high speeds for extended periods, which is also a contributing factor to its malfunction. Below are the troubleshooting and rectification methods for a non-working car air conditioning compressor: Both high and low-pressure gauges show readings lower than normal: This may indicate insufficient refrigerant. During inspection, the high-pressure pipe may feel slightly warm, and the low-pressure pipe slightly cold, with minimal temperature difference. Bubbles can be observed in the sight glass every 1-2 seconds. In this case, first check for any leaks, repair them, and then replenish the refrigerant. Low-pressure gauge reading significantly lower than normal: Here, a misty flow can be seen in the sight glass, with no temperature difference between the high and low-pressure pipes, and the air not cooling. This indicates a severe leak. Low-pressure gauge reading near zero, and high-pressure gauge reading lower than normal: In this scenario, the air conditioning system often blows non-cool air, with frost forming on the pipes before and after the expansion valve. The reasons could be: on one hand, the expansion valve might be blocked by frost, preventing refrigerant circulation in the system. In this case, repeatedly evacuate the system and recharge the refrigerant; on the other hand, the expansion valve's temperature sensing bulb might be damaged, causing the valve not to open.
Was this review help?
14
5
Share
More Forum Discussions

What is the function of a car's carbon canister solenoid valve?

The function of a car's carbon canister solenoid valve is to adsorb and filter gasoline vapors inside the fuel tank. It controls the entry of fuel vapors into the engine for combustion through the solenoid valve, thereby reducing fuel consumption and preventing excessive fuel tank pressure. A faulty carbon canister solenoid valve not only increases fuel consumption but also affects the normal operation of the car's engine. Methods to check the condition of the carbon canister solenoid valve: 1. If gas sprays out when opening the fuel tank cap, it indicates a damaged solenoid valve; 2. If gasoline vapors or dripping oil appear at the carbon canister's atmospheric vent, it indicates a damaged solenoid valve; 3. Symptoms like poor acceleration, jerking, unstable idle speed (fluctuating high and low), indicate a damaged solenoid valve; 4. If the engine fails to start after stalling or there are abnormal noises while driving, it indicates a damaged solenoid valve.
7
5
Share

What Does a Car Sleeper Look Like?

A sleeper is a berth that allows passengers to lie flat and sleep, essentially serving as a small bed installed within long-distance transportation vehicles. Here are some relevant details: 1. Longitudinal Arrangement: Sleeper berths in passenger vehicles should be arranged longitudinally (aligned with the direction of vehicle movement). The width of each berth should not be less than 450mm, the longitudinal spacing between berths should not be less than 1400mm, and the lateral spacing between adjacent berths should not be less than 350mm. For double-decker sleeper arrangements, the height of the upper berth should not be less than 780mm, and the clearance between berths should not be less than 750mm. 2. During Long-Distance Travel: Avoid carrying excessive cash on your person. It's advisable to bring a portable power bank to prevent being unable to charge your phone if it runs out of battery. During long-distance bus journeys, drink water in moderation.
8
0
Share

Why does the Maybach 62s require an A1 driver's license?

The Maybach 62s has a length of over 6 meters. According to relevant standards, vehicles with a length equal to or exceeding 6 meters, or with a seating capacity of 20 or more passengers, are classified as large buses or large sedans. Only drivers holding an A1 license are qualified to operate such vehicles, hence the Maybach 62s falls under the A1 license category. Additional Information: Maybach, with its noble lineage, has set new standards in the top-tier luxury sedan market. The new Maybach sedan embodies the concepts of technological leadership, elegance, aesthetics, and perfection. The perfect fusion of design, color, and materials results in the exquisite design of this top-class luxury sedan, further enhancing its grandeur and creating a distinctive style. The new Maybach sedan offers spacious interiors and elegant styling, showcasing a unique charm formed by the perfect harmony between classic and modern elements.
17
1
Share

How often should the spark plugs of the New Emgrand be replaced?

The spark plugs of the New Emgrand should be replaced every 20,000 kilometers. Spark plugs are a crucial component of gasoline engines, determining whether the engine can ignite properly. When the ignition coil, following the engine's firing order, delivers a pulsed voltage to the spark plug via the high-voltage wire, the spark plug uses this voltage to create an electric spark by ionizing the air between its two electrodes, thereby igniting the combustible air-fuel mixture in the engine cylinder. The New Emgrand is a compact model under Geely, with body dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, and a wheelbase of 2650mm. In terms of power, the vehicle is equipped with a 1.5-liter inline 4-cylinder naturally aspirated engine, delivering a maximum power of 80KW and a maximum torque of 140NM, paired with either a 5-speed manual transmission or a CVT continuously variable transmission.
12
0
Share

What are the solutions to reduce noise in the Fit?

The solutions to reduce noise in the Fit are: 1. Install sound-absorbing foam material under the engine hood; 2. Apply sound-absorbing cotton material to the trunk, the bottom of the trunk, and the wheel arches on both sides of the trunk; 3. Install professional damping plates in areas prone to noise; 4. Install sealing strips inside the doors; 5. Replace the tires with quieter ones. Taking the 2020 Fit as an example, its body dimensions are 4096mm in length, 1695mm in width, and 1525mm in height, with a wheelbase of 2350mm and a fuel tank capacity of 40 liters. This model is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131 PS, a maximum power of 96 kW, and a maximum torque of 155 Nm, paired with a 5-speed manual transmission.
19
5
Share

What does it mean to be in neutral gear?

It refers to the gear position of the transmission being in neutral. There are 3 key safe driving techniques: 1. Pay attention at intersections: Exercise extra caution when passing through intersections, try to slow down, and stop slightly farther back at red lights. After the light turns green, release the brake and wait to confirm there are no vehicles running red lights from the other direction or pedestrians still crossing before accelerating. 2. Use headlights wisely: Turn on headlights during nighttime, rain, snow, fog, dawn, dusk, or any low-light conditions. The combined reaction time and braking distance should be less than the illuminated range of your headlights. Avoid excessive speed to ensure enough reaction time when obstacles appear in your headlight beam. Regularly check headlight functionality and clean the covers. 3. Maintain safe following distance: Don't tailgate the vehicle ahead, nor allow vehicles to tailgate you. If a following vehicle is too close, appropriately increase your distance from the vehicle ahead to allow sufficient reaction distance for both vehicles.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.