What Causes the BYD Han's Trunk to Not Open?

What are the reasons for the Polo's air conditioning not cooling?

Here are the reasons why the Polo's air conditioning is not cooling: 1. Lack of refrigerant. 2. Dirty condenser. The following are symptoms indicating the need to add refrigerant: 1. Usage exceeding 5 years. 2. The external unit fan does not blow hot air in summer. 3. Frost formation on the high-pressure pipe (thin pipe) in summer. 4. Ice formation or mist blowing from the internal unit in summer. 5. The thick pipe at the external unit's copper pipe connection does not feel hot to the touch in winter. Below is additional information about car air conditioning: 1. Car air conditioning includes cooling devices, heating devices, and ventilation devices. 2. This integrated system makes full use of the limited space inside the car, featuring a simple structure and easy operation, making it a popular modern car air conditioning system internationally.

17

5

Share

How to turn off the overhead light in the 2021 Buick Excelle?

2021 Buick Excelle overhead light can be turned off as follows: 1. It automatically turns on when the door is opened and turns off when the door is closed. If you are in the car with the door closed, you can manually turn it on or off. 2. Manual off: The reading light generally has 3 settings: 1st setting is DOOR; 1st setting is OPEN; and 1st setting is CLOSE. If set to CLOSE, the light will not turn on. If set to DOOR, the light will turn on when the door is opened. OPEN is for manual operation. The reading light will remain on for about 15 seconds under the following conditions: 1. When the driver's side door is closed and the key is removed from the ignition switch. 2. When the mechanical key is not inserted into the ignition switch and the ignition switch is turned to the "LOCK" position. 3. When the key is not in the ignition switch and the driver's side door lock is opened. 4. When there is no key in the ignition switch and the last door is closed.

18

3

Share

What are the differences between the 2019 and 2020 LaCrosse models?

The differences between the 2019 and 2020 LaCrosse models are: 1. Different maximum engine horsepower: The 2019 LaCrosse has a maximum engine horsepower of 241 hp, while the 2020 LaCrosse has a maximum engine horsepower of 237 hp. 2. Different maximum engine power: The 2019 LaCrosse has a maximum engine power of 177 kW, while the 2020 LaCrosse has a maximum engine power of 174 kW. Here are some relevant details: Both the 2019 and 2020 LaCrosse models have the same dimensions of 5026mm in length, 1866mm in width, and 1462mm in height, with a wheelbase of 2905mm. They are equipped with a 9-speed automatic transmission, can reach a top speed of 235 km/h, and feature a 4-door, 5-seat sedan body type.

16

5

Share

Will the tire be punctured if it runs over a glass bottle?

The tire may not be punctured on the first day after running over a glass bottle, but it could be punctured on the second day. This is because glass fragments may get lodged in the tire tread, and during use, the tire's pressure can push these fragments further in, potentially puncturing the tire's inner liner. When inflating tires, pay attention to the following points: Always use a pressure gauge to check the tire pressure to avoid overinflation, which can cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as driving increases tire temperature and affects pressure. Check the valve stem. If the valve stem and core are not aligned properly or have other defects, it may be difficult to inflate or measure pressure. Ensure clean air when inflating. The air should not contain moisture or oil, as these can damage the inner tube rubber. Do not exceed the standard pressure significantly and then release air, nor overinflate after prolonged periods without inflation. Excessive pressure can overstretch the tire cords, reducing their strength and affecting tire lifespan. Before inflating, clean the valve stem of any dust and ensure the valve core is not loose. After inflating, apply soapy water (or saliva) to the valve stem to check for leaks (bubbles indicate a leak). Always replace the valve cap tightly to prevent dirt from entering. When inflating radial tires, be aware that their structure causes greater sinking and contact area, which might lead to misjudging inflation levels. Use a standard pressure gauge for accurate measurement. Radial tires generally require 0.5-1.5 kg/cm² higher pressure than conventional tires.

4

2

Share

What transmission does the Porsche 911 use?

Porsche 911 currently available models are equipped with dual-clutch transmissions, which come in two versions: 7-speed dual-clutch transmission and 8-speed dual-clutch transmission. Here is more information about the Porsche 911: 1. The currently available Porsche 911 models are divided into Euro 5 and China 6 versions, and based on body structure, they can be categorized into hardtop sports cars and soft-top convertibles. 2. There are six available models of the Porsche 911: 2021, 2020, 2019, 2018, 2017, and 2016 models. 3. The new 911 series all use an 8-speed dual-clutch transmission, which has one more gear compared to the older 911's 7-speed dual-clutch transmission. The gear ratios are closer, resulting in better fuel economy.

14

5

Share

How to Remove the Volkswagen Brake Pedal Clip?

Volkswagen brake pedal clip removal steps are as follows: 1. Disassembly. Detach the brake pedal spring, clutch pedal and clutch cable. Remove the retaining clip from the shift fork and detach the fork. 2. Remove the retaining spring from the pedal shaft and loosen the hex nut on the pedal shaft. 3. Remove the pedal shaft by pulling it out from the left side. 4. Installation. Lubricate the pedal shaft with special grease. When replacing, the brake pedal should be replaced as an assembly with the pedal bushing. 5. Replace the pedal rubber cover. Install the pedal and spring in position, and insert the pedal shaft into the pedal bracket. Secure the pedal shaft to the pedal bracket. 6. Fix the pedal shaft. Connect the pushrod fork to the brake pedal, install the pushrod pin and retaining clip, and insert the brake pedal spring. 7. Install the clutch bracket and tighten it. Install the clutch pedal spring and clutch cable. 8. After replacement, remember to perform a brake test.

10

2

Share

What Causes the BYD Han's Trunk to Not Open?

What are the reasons for the Polo's air conditioning not cooling?

How to turn off the overhead light in the 2021 Buick Excelle?

What are the differences between the 2019 and 2020 LaCrosse models?

Will the tire be punctured if it runs over a glass bottle?

What transmission does the Porsche 911 use?

How to Remove the Volkswagen Brake Pedal Clip?

Where is the BMW X1's cabin air filter located?

Is the 6-speed transmission of the Binyue a dry or wet dual-clutch?

Should the Buick LaCrosse 1.5T use 92 or 95 octane gasoline?

How to Replace the Fuel Tank Cover Locking Latch on a GL8?