What Causes the Buzzing Sound When Engine RPM is High?

1 Answers
MiaAnn
07/30/25 1:12am
Engine RPM is high with a buzzing sound due to the following reasons: Faulty temperature sensor or temperature regulator: When the car is in normal idle state, the buzzing sound may be caused by the electronic fan working for radiator cooling. However, this sound is intermittent. If the buzzing persists, it may indicate a faulty temperature sensor or temperature regulator, requiring timely inspection by the owner to avoid abnormalities during driving, which could lead to more severe car failures and financial losses. Cylinder malfunction: The buzzing sound at low speed or during gear shifting may be caused by excessive clearance between the piston and cylinder wall, improper assembly tightness, or abnormal wear during installation. Another possible cause is engine knocking, where the initial stage of knocking produces a buzzing sound, which could be due to advanced ignition timing or excessive carbon deposits in the cylinder. Engine oil issues: During high-speed operation, using the wrong engine oil can also cause this phenomenon. Incorrect oil selection may result in insufficient lubrication inside the engine, leading to a buzzing sound. Alternatively, a malfunctioning water pump, whether clogged or leaking, can also cause the engine to produce a buzzing noise.
Was this review help?
10
4
Share
More Forum Discussions

How to Drive a Buick GL8 Automatic Transmission?

Buick GL8's D gear is the forward driving gear, which is commonly used for normal driving conditions. The neutral gear of the Buick GL8 should be engaged when the car needs to be in neutral. The P gear is the parking gear of the Buick GL8, used when parking the vehicle. The R gear is the reverse gear for automatic transmission cars, which is not much different from the R gear in manual transmission cars. The Buick GL8 does not have a conventional handbrake; the parking brake is located to the left of the brake pedal and is operated by foot.
1
0
Share

How to Use the One-Touch Power Window Feature in Honda Civic?

Press the button to the first detent position (applying excessive force will reach the second detent), then release once the window reaches the desired position. Applying firm pressure will activate the second detent. Lift the button to the first detent position, then release once the window reaches the desired position. Briefly pulling the switch to the second detent will automatically close the window. Press and hold the lock button for 3 seconds to automatically raise all four windows; similarly, holding the unlock button for about 3 seconds will synchronously lower all four windows.
3
2
Share

How to Use the One-Touch Power Window Feature in Volkswagen Tharu

Press the button to the first detent position, then release once the window reaches the desired position. Apply slightly more pressure to reach the second detent, and the window will automatically roll up. Press the button to the first detent position, then release once the window reaches the desired position. Apply slightly more pressure to reach the second detent, and the window will automatically roll down. Owners can also control the one-touch power windows using the lock and unlock buttons on the key fob.
1
0
Share

How to Handle Driving a Motor Vehicle Without a License While Under the Influence of Alcohol?

Handing over a motor vehicle to someone who does not possess a motor vehicle driver's license or whose license has been revoked or temporarily suspended will result in the detention of the motor vehicle driver's license. The traffic management department of the public security authority will impose a fine, and may additionally impose a detention penalty of up to 15 days.
1
0
Share

How to Adjust the Car Seat Headrest?

Seat adjustment buttons vary in position depending on the car model, but they are generally located next to the two support rods of the headrest. Press the button to adjust the height. The distance between the head and the car headrest should be as small as possible. The smaller the distance, the greater the cushioning effect the headrest provides for the head and neck.
7
1
Share

How to Find a Tow Truck for Rescue?

Place the safety warning sign at the legally required safe position behind the disabled vehicle. The connection between the tow rope and the disabled vehicle must be secure. Before towing the disabled vehicle onto the platform, shift the transmission lever to neutral and turn off all electrical devices. Once the disabled vehicle's tires contact the front-end stopper of the platform, lower the platform to a horizontal position and reset it. Ensure the disabled vehicle's parking brake is firmly engaged. After securely fastening the disabled vehicle, repeatedly check its condition and the tension of the straps in both clockwise and counterclockwise directions to eliminate any safety hazards.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.