What Causes the Buzzing Sound When Accelerating?

3 Answers
OCooper
07/28/25 10:40pm
The reasons for the buzzing sound when accelerating are: 1. Unstable engine operation; 2. Carburetor malfunction or delayed ignition timing; 3. Excessive engine carbon buildup or poor filtration; 4. Insufficient lubrication of engine components by the oil. The function of the throttle is to control the cylinder's filling volume by adjusting the carburetor's throttle opening and to regulate the fuel flow through the fuel regulator, determining the engine's output power and generating thrust. Solutions for the buzzing sound when accelerating include: 1. Check if the engine operation is unstable; 2. Inspect the carburetor for malfunctions or delayed ignition timing; 3. Determine if there is excessive carbon buildup in the engine or poor filtration; 4. Check the oil lubrication condition.
Was this review help?
13
3
Share
McStephen
08/12/25 2:05am
The buzzing noise when I step on the gas is really frustrating. Thinking back to when I drove my old car, it had the same issue. The sound could come from several places: the intake system, like if the air filter is too clogged, the engine struggles to breathe and makes a buzzing noise; if there's a leak in the exhaust system, a hole in the pipe or loose connections can also cause this; worn or loose drive belts can produce unusual noises under acceleration due to increased friction; a malfunctioning fuel pump often buzzes from the rear of the car. Checking is simple: open the hood and see if the air filter is dirty—cleaning or replacing it might solve the problem; then step on the gas and listen for the direction of the noise—if it's from the front, it could be the belt or intake, while a rear noise might indicate a fuel pump issue. Don’t delay like I did—later, my engine overheated, and the repair costs doubled. It’s better to visit a repair shop early; fixing small issues promptly saves money and hassle.
Was this review help?
15
2
Share
Expand All
DiJesse
10/01/25 4:25am
The buzzing sound when I refuel my car reminds me of my friend's modified car. It could be caused by loose intake modifications leading to abnormal air flow; or an exhaust system leak, such as a loose exhaust pipe after modifications making noise; it's also common when the air filter is too dirty, affecting the engine's normal air intake; a loose drive belt slipping during acceleration can produce a buzzing sound; an aging or faulty fuel pump can also make similar noises. Simple solutions: first check the condition of the air filter, clean or replace it if necessary; listen to the location of the sound, if it becomes more obvious as you press the accelerator, check the exhaust and drive system. I once ignored it after modifying the engine, resulting in insufficient power affecting driving. It's best to go to a professional shop for inspection immediately.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Can I Use 95 Octane Gasoline After Using 98 Octane?

Yes, you can use 95 octane gasoline after using 98 octane, but you should first use up the 98 octane gasoline before refilling with 95 octane. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from the distillation, cracking, or pyrolysis of petroleum, used as fuel. It appears as a transparent liquid, primarily composed of aliphatic hydrocarbons, naphthenic hydrocarbons, and a certain amount of aromatic hydrocarbons. Notes on refueling: 1. Refuel in the morning or evening when temperatures are relatively lower, as the same volume of gasoline can have a higher mass; 2. Avoid filling the tank completely when driving in the city, as this can increase engine load; 3. Do not wait until the tank is empty before refueling, as insufficient fuel can prevent the fuel pump from being submerged, reducing its lifespan; 4. Avoid refueling during thunderstorms, as the fuel nozzle might introduce stray currents into the fuel tank, increasing the movement of unstable gasoline molecules and posing fire or explosion risks.
2
0
Share

Where to Check the Emission Standard for a New Car?

Methods to check the emission standard for a new car include: 1. Bring the vehicle registration certificate and driving license to the vehicle management office for inquiry; 2. Check the environmental protection label; 3. Log in to the motor vehicle environmental protection website for inquiry; 4. Check the vehicle factory certificate; 5. Make a rough judgment based on the year the car was registered. The purpose of setting automobile emission standards is to control and reduce vehicle emission pollutants and improve ambient air quality. Automobile emission pollutants include: carbon monoxide, hydrocarbons, nitrogen oxides, and PM harmful gases. Solutions for non-compliant vehicle emissions include: 1. Clean the fuel injector; 2. Replace the piston sealing ring; 3. Use higher-quality fuel.
10
2
Share

Can National 5 Vehicles Still Be Registered Now?

National 5 vehicles cannot be registered now. National 5 represents the fifth phase of China's vehicle emission control standards, where higher numbers indicate stricter standards. These emission standards are used for testing new vehicles. Methods to determine a vehicle's emission standard include: 1. Check the annual inspection label on the vehicle's front windshield—National 3 is marked as 'iii', National 4 as 'iv', National 5 as 'v', and National 6 as 'vi'; 2. Visit the Motor Vehicle Environmental Protection website, enter the VIN and the last six digits of the engine number to query. The vehicle registration process is as follows: 1. Obtain the vehicle certificate; 2. Keep the triplicate purchase invoice; 3. Pay the vehicle purchase tax and obtain the tax certificate; 4. Register and inspect the vehicle at the DMV; 5. Choose a license plate number; 6. Pay the fee and install the plate after receiving it.
11
1
Share

Where is the engine number located on the new Santana?

The engine number of the new Santana is located in two places: 1. On the plastic shell of the engine timing cover; 2. On the engine block. Taking the 2021 Santana Manual Trend Edition as an example, it is a compact car with body dimensions of 4475mm in length, 1706mm in width, 1469mm in height, and a wheelbase of 2603mm. The 2021 Santana Manual Trend Edition is equipped with a 1.5L naturally aspirated engine, with a maximum power speed of 6100 rpm and a maximum torque speed of 4000 rpm. It uses a MacPherson independent suspension for the front suspension and a composite torsion beam non-independent suspension for the rear suspension.
11
0
Share

How to Switch Between High and Low Beams?

The steps to switch between high and low beams are: 1. Rotate the light control lever located on the left side of the steering wheel all the way forward to turn on the low beams; 2. Push the lever upward to turn on the high beams, then push it downward to turn off the high beams, completing the beam switching. High and low beams adjust the intensity of light based on the distance of the filaments: 1. High beams focus the light parallel, emitting a concentrated and bright light that can illuminate distant and high objects; 2. Low beams emit light beyond the focus, between 1 to 2 times the focal length, producing a divergent light that illuminates a larger area of nearby objects.
1
1
Share

How to Replace the Battery in an Older Mercedes ML430 Key?

The method to replace the battery in an older Mercedes ML430 key is as follows: 1. Push the small toothed switch at the end of the remote to the right to remove the mechanical key; 2. Insert the mechanical key into the gap at the bottom of the key and gently pry open the back cover; 3. Remove the old battery and replace it with a new one of the same model; 4. Reattach the back cover and the mechanical key. The Mercedes ML430 is a business SUV with the following body dimensions: length 4587mm, width 1834mm, height 1775mm, wheelbase 2849mm, minimum ground clearance 204mm, and fuel tank capacity 83 liters.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.