What Causes the Buzzing Sound When a Newly Purchased New Energy Vehicle Starts?

2 Answers
StLucille
09/02/25 8:20am
Newly purchased new energy vehicles may produce abnormal sounds during startup, which is a normal phenomenon. The reasons are as follows: Slow Current Startup: When an electric vehicle starts, the input current to the drive motor is large. The motor needs to overcome resistance to reach the required speed, which naturally produces noise. This sound is caused by the friction between current torque and magnetic force and is normal. Electric Vehicle Noise: When carrying passengers, the startup current of an electric vehicle increases, making the noise more noticeable. This is normal and does not affect the vehicle's operation. However, it is advisable to accelerate slightly slower during startup to reduce the startup current. This will result in relatively less noise from the drive wheels and also benefit the battery's range.
Was this review help?
17
1
Share
SanRylee
09/15/25 3:26am
When I first got my new energy vehicle, I was also startled by the buzzing sound. Later, after researching, I learned it's a normal phenomenon. When the electric motor starts, it needs to generate high torque, and the electromagnetic coils produce high-frequency vibration sounds, similar to our phone vibrations but louder. The cooling fan of the battery management system also spins noisily when starting. Another easily overlooked reason is the slight buzzing from the electronic vacuum pump when it assists the brakes. These sounds are particularly noticeable in garages or quiet areas, but you'll get used to them after driving for a while. However, if accompanied by metal grinding sounds or steering wheel vibrations, you should pay attention—it might be an issue with the half-shaft or bearings, in which case you should promptly schedule an after-sales inspection.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

How many days does it usually take to receive information about traffic violation photos?

Generally, traffic violations captured by cameras can be checked online within 3-5 days. Hazards of license plate and document-related violations: Deliberately obscuring or damaging motor vehicle license plates, forging or altering license plates, using license plates from other vehicles, or driving without a license or plates. These actions are highly likely to cause traffic accidents. Drivers who use unregistered, counterfeit, or obscured license plates often do so to speed, which can easily lead to major traffic accidents. They also increase the difficulty of solving hit-and-run cases, robberies, thefts, and other crimes. Since the vehicles have no plates, fake plates, or obscured plates, once they flee the scene, eyewitnesses, electronic surveillance, and traffic cameras cannot record the license plate number, making it much harder to solve the case. These actions can also lead to other traffic violations. They disrupt normal license plate management, easily create a copycat effect, weaken citizens' awareness of the law, render license plates meaningless, and throw vehicle management into chaos. They also cause significant inconvenience to owners who follow proper procedures. Traffic violation handling procedures: According to laws and regulations, if a violator is to be fined more than 200 yuan (not including 200 yuan), have their driver's license suspended or revoked, or if a unit is to be fined, an investigation must be conducted, evidence collected, and a penalty decision made following standard procedures.
15
5
Share

What do high gear and low gear mean?

High gear in a car means a large gear drives a small gear, while low gear means a small gear drives a large gear. Here are the related characteristics of using different gears: Low gear: Slow speed but high torque. Suitable for climbing slopes or hauling heavy loads. High gear: Fast speed but low torque. Suitable for high-speed driving. The speed ranges corresponding to manual transmission gears are: 1st gear: 1-15 km/h. 2nd gear: 15-25 km/h. 3rd gear: 25-35 km/h. 4th gear: 35-45 km/h. 5th gear: Above 45 km/h.
20
1
Share

When turning left, should I look at the front or left traffic signal?

When there is a dedicated left-turn traffic light, proceed when it turns green. If there is no dedicated left-turn signal, you may turn left when the straight-through light turns green. Precautions for using turn signals are as follows: While driving: When traffic in your lane is congested and you need to change lanes, check the rearview mirror to see if the adjacent lane is clear. Without obstructing vehicles in other lanes, activate the corresponding turn signal before changing lanes. When making a U-turn: Activate the left turn signal and check for oncoming vehicles in front and behind before proceeding. Honking: On road sections without a solid center line, when overtaking, activate the left turn signal and honk. If being overtaken, yield by moving to the right.
5
4
Share

What is the positioning of the Subaru BRZ model?

The Subaru BRZ is positioned as a sports car. It features a horizontally opposed engine and a front-engine, rear-wheel-drive layout. The suspension system consists of front MacPherson strut independent suspension and rear double-wishbone suspension. The Subaru BRZ has body dimensions of 4239mm in length, 1775mm in width, and 1285mm in height, with a wheelbase of 2570mm. It is equipped with 225/40ZR18 Michelin Pilot Super Sport series tires and a reinforced chassis. In terms of power, the Subaru BRZ is powered by a 2.0L naturally aspirated direct-injection engine, with options for a 6-speed manual transmission or a 6-speed automatic transmission.
17
4
Share

Position of the Accelerator and Brake Pedals in Mercedes-Benz Vehicles

In Mercedes-Benz vehicles, the accelerator is on the right, and the brake is on the left. Whether it's a manual or automatic transmission model, the brake is always on the left, and the accelerator is always on the right. This design is based on ergonomics, allowing drivers to react quickly in emergency situations. For automatic transmission vehicles without a clutch pedal, the left foot is not used and should be placed on the designated left foot rest on the floor. The floor is designed with a specific left foot rest to prevent the left foot from being suspended for long periods. If the left foot remains suspended for too long, fatigue may cause it to inadvertently press down. Using only the right foot for control ensures that pressing the accelerator won't accidentally engage the brake, and vice versa. Mercedes-Benz is a German luxury car brand renowned for its perfect technical standards, rigorous quality benchmarks, innovative capabilities, and a series of classic coupe models. The Mercedes-Benz three-pointed star is one of the most famous automotive and brand logos in the world.
17
0
Share

How Long Does It Take for Tree Sap to Penetrate Car Paint?

Tree sap can typically corrode car paint in about a week. Tree sap contains a certain level of acidity, and prolonged attachment to the car can damage the paint. Below is relevant information: Advantages of car paint: The paint film has good fullness, high gloss, high hardness, and excellent adhesion. It possesses superior mechanical properties, outstanding gloss retention, weather resistance, and abrasion resistance, along with good resistance to acids, alkalis, alcohol, and gasoline. Classification of car paint: Car paint can generally be divided into standard paint, metallic paint, and pearl paint. Standard paint is the most basic type, usually in white and red, with a pure overall color. Metallic paint, based on standard paint, incorporates metal powders such as aluminum and copper to enhance texture. Pearl paint, similar to metallic paint but more dazzling, adds mica particles to metallic paint, creating a radiant effect under sunlight.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.