What Causes the Buzzing Sound in the Envision?

1 Answers
StAdriana
07/29/25 9:21pm
Reasons for the buzzing sound in the Envision: Gaps or misalignment in wiring: Gaps, misalignment, or displacement between leather, plastic, and wiring components, especially after exposure to intense sunlight, can easily lead to this issue. This causes the vehicle to produce abnormal noises when driving on bumpy roads due to loose parts being squeezed. Generally, identifying the source of the noise and using materials like paper towels or rubber as spacers can help block the noise. Abnormal noise from the car audio system: This is typically caused by collisions between the car audio amplifier and other vehicle components. Tightening the screws to secure the amplifier, CD player, etc., can usually resolve this issue. Electrical current noise inside the car: This noise is usually more noticeable when the car is first started, especially during cold starts when audio, air conditioning, wipers, and other devices automatically turn on. The noise will naturally disappear once the engine warms up or after driving for a while when the system stabilizes.
Was this review help?
15
1
Share
More Forum Discussions

How to Determine the Quality of a Radiator Cap

Methods to determine the quality of a radiator cap include: 1. Leakage; 2. Reduced circulation capacity; 3. Abnormal noises; 4. Idling issues; 5. Water pump leakage. An automobile radiator is primarily composed of a radiator core, water pipes, cooling air fins, an upper tank, and a lower tank. The automobile radiator, also known as a heat exchanger, is a key component in the vehicle's cooling system. Its function is to dissipate heat: the coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket in a continuous cycle, thereby achieving heat dissipation and temperature regulation. It is also an essential part of the automobile engine.
16
3
Share

Where is the OBD location of the Peugeot 307?

The OBD location of the Peugeot 307 is behind the panel on the lower left side of the driver's dashboard, and this panel is labeled with 'OBD'. If you see this panel, simply pull it out to access the car's OBD interface. OBD is a system that monitors the vehicle's operating status and promptly reports any abnormalities, primarily focusing on the engine condition and exhaust emissions. The Peugeot 307 is a model under Dongfeng Peugeot, with dimensions of 4249mm in length, 1786mm in width, and 1556mm in height, a wheelbase of 2608mm, equipped with a 5-speed manual transmission, and a top speed of 195 kilometers per hour.
20
3
Share

How to Increase Friction Between Car Tires and the Road Surface?

Creating tread patterns on the tire surface increases the roughness of the contact area, thereby enhancing friction. The principle is the same as wrapping chains around tires in snowy conditions. Additional tips: 1. Replace old tires: Over time, tires wear out, and when the treads are significantly worn, braking can cause skidding. Such tires have extremely low friction and should be replaced with new ones to improve traction. 2. Tire pressure: Tire pressure also affects friction. When tires are fully inflated, the contact area with the road is smaller compared to under-inflated tires. A smaller contact area results in less friction, and vice versa. Therefore, maintaining proper tire pressure is crucial.
2
4
Share

Will removing the roof trim cause water leakage?

Removing the roof trim will not cause water leakage. Below is relevant information about automotive sealing strips: 1. Function: Automotive sealing strips are designed to fill gaps between body components, providing sound insulation, waterproofing, and vibration damping. Made of rubber, these strips are prone to aging and hardening when exposed to prolonged sunlight. 2. Impact: The roof trim primarily serves a decorative purpose and does not have a waterproof function. Therefore, removing it will not result in water leakage. The main concern may be aesthetic, as some vehicle models have exposed weld points connecting the roof to the side panels, which might look odd without the trim. However, removing the sealing strip around a sunroof will definitely cause water leakage, as it serves a sealing function.
14
0
Share

Is the Geely Binyue 4-cylinder equipped with a dry dual-clutch transmission?

Geely Binyue 4-cylinder is equipped with a dry dual-clutch transmission. Taking the 2020 Binyue as an example, its body dimensions are: length 4330mm, width 1800mm, height 1609mm, wheelbase 2600mm, fuel tank capacity 45l, and curb weight 1310kg. The 2020 Binyue features a MacPherson strut front suspension and a torsion beam rear suspension. It is powered by a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 141ps, maximum power of 104kw, and maximum torque of 235nm, paired with a 6-speed manual transmission.
13
1
Share

What does ISOFIX on car seats mean?

ISOFIX on car seats refers to a system for connecting child restraint systems to vehicles. It consists of two rigid attachment points on the vehicle, two corresponding rigid attachment devices on the child restraint system, and an anti-rotation method (such as top tether anti-rotation or support leg anti-rotation). The steps to detach an ISOFIX interface are: 1. Adjust the safety seat headrest to its highest position; 2. Press the shoulder strap adjuster and adjust the shoulder straps to their limit; 3. Open the buckle to separate the shoulder straps left and right, placing them on both sides of the seat; 4. Fasten the five-point buckle and adjust the shoulder straps to the bottom; 5. Push the seat inward while simultaneously pressing the red buttons on the ISOFIX interface, then pull backward forcefully until a click sound is heard, indicating the ISOFIX interface has been successfully removed.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.