What Causes the Buick Excelle to Feel Sluggish and Muffled During Acceleration?

2 Answers
Presley
07/29/25 12:17am
Buick Excelle feeling sluggish and muffled during acceleration is caused by carbon buildup, incompatible fuel, clogged filters, or engine malfunction. Carbon buildup includes deposits in the cylinders, throttle valve, spark plugs, and intake system. Fuel: Using fuel with an incompatible octane rating can reduce the vehicle's power output. Air intake: If the air filter is not cleaned regularly, it can become clogged over time. Engine overheating: Insufficient engine oil, insufficient engine coolant, or malfunctioning engine cooling components. Solutions for the Buick Excelle feeling sluggish and muffled during acceleration are as follows: Visit a 4S dealership for carbon cleaning services, but the approach should be tailored to the specific situation. Use the appropriate fuel grade for your engine as specified, and perform regular maintenance. Clean the air filter regularly. Regularly check the oil and coolant levels. Do not mix different types of engine oil or use water as a substitute for coolant. Perform regular maintenance.
Was this review help?
1
5
Share
BethanyLee
08/12/25 4:32am
I've been driving the Buick Excelle for many years, and the sluggish acceleration is really a headache. There are usually several possible reasons. First, it could be an issue with the ignition system, such as aging spark plugs or a faulty ignition coil, causing the engine to misfire. Second, it might be a fuel problem, like a clogged fuel filter or dirty fuel injectors, affecting fuel supply. Third, there could be a fault in the intake or exhaust system, such as a dirty air filter restricting airflow or a clogged catalytic converter hindering exhaust flow. Fourth, excessive carbon buildup on piston rings and valves can reduce combustion efficiency. Fifth, it could be a transmission issue, especially with automatic transmissions—clutch slippage can cause sluggish acceleration. I recommend checking the simpler items first, like replacing spark plugs or the air filter. If that doesn't help, take it to a professional shop for a diagnostic scan to avoid any dangerous situations on the highway that could disrupt your trip.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

What is the maximum speed limit for trucks on highways?

On highways, the maximum speed limit for trucks must not exceed 100 kilometers per hour. Highway speed limit regulations: 1. Minimum speed: When driving normally on highways, the minimum speed for motor vehicles must not be lower than 60 km/h. 2. Two lanes in the same direction: The minimum speed for the left lane is 100 km/h. 3. Three or more lanes in the same direction: The minimum speed for the far-left lane is 110 km/h, while the middle lane has a minimum speed of 90 km/h. 4. Small passenger vehicles: The maximum speed limit for small passenger vehicles on highways must not exceed 120 km/h, while other motor vehicles must not exceed 100 km/h, and motorcycles must not exceed 80 km/h.
12
1
Share

What to Do When the Tire Pressure Monitoring Warning Light Comes On?

The tire pressure monitoring warning light comes on should slow down the speed, find a safe place to pull over, turn off the engine, wait for 1 to 2 minutes and then restart the vehicle. After the vehicle runs stably, check the tire pressure value displayed on the dashboard. If the tire pressure light is on due to insufficient or excessive tire pressure, adjustments can be made on the spot. The appropriate tire pressure is 2.4 to 2.5 bar. You should regularly check whether the tire pressure is normal in daily life. The hazards of excessive tire pressure: 1. The friction and adhesion of the tire will be reduced, affecting the braking effect; 2. It will cause steering wheel vibration and deviation, reducing driving comfort; 3. It will accelerate the local wear of the tread pattern in the center of the tire, reducing the tire's service life; 4. The vibration of the car body will increase, indirectly affecting the service life of other components.
5
4
Share

How to Determine if the Expansion Valve is Faulty?

Under standard refrigerant charge and with the engine idling, the low-pressure side of a typical car air conditioning system should read between 0.1-0.25MPa (1-2.5KG/CM2 or 15-35Lbf/in2). If the low-pressure reading falls below or exceeds this range, it indicates a malfunctioning expansion valve. Here are detailed insights about the expansion valve: 1. Working Principle: After passing through the condenser, high-temperature and high-pressure refrigerant undergoes pressure and temperature reduction when flowing through the expansion valve, transforming into low-pressure, low-temperature liquid refrigerant. This process creates optimal conditions for refrigerant evaporation and cooling within the evaporator. 2. Primary Function: The expansion valve throttles and reduces the pressure of high-pressure liquid refrigerant from the dryer, while regulating and controlling the amount of liquid refrigerant entering the evaporator. This adaptation to varying cooling loads prevents compressor liquid slugging.
9
0
Share

What to Do If the Headlights Stay On?

If the daytime running lights stay on, insert the car key and turn it to the position where only the radio is on. Pull the combination switch on the left side of the steering wheel towards the driver's direction while pulling it downward and hold it. Turn on the car key, and after about 3 seconds, a 'dong' sound will indicate that the daytime running lights have been successfully turned off. More details are as follows: 1. It's best not to turn off the daytime running lights: Because car daytime running lights not only make the car look better but also, more importantly, can alert oncoming vehicles, thereby reducing the probability of car accidents. It's like having a warning light in front to signal, making it unlikely for a driver to drive straight into it unless they make a serious mistake and drive forward without looking. Therefore, turning off the daytime running lights is more harmful than beneficial. 2. Benefits of keeping daytime running lights on: Using daytime running lights abroad reduces vehicle accidents by 12.4% and also lowers the fatality rate of car accidents by 26.4%. In short, the purpose of daytime running lights is for traffic safety.
3
0
Share

What is the scope of modifications allowed by the DMV in 2021?

In 2021, the new policy on vehicle modifications includes allowing the installation of roof racks and side steps, but it is important to note that the vehicle's length and width must not be altered. Changing the style of wheels is permitted, but the vehicle's height must remain unchanged. Modifying the front grille design is allowed, but the vehicle's emblem must not be altered. Replacing the bumper is also permitted, provided that the vehicle's length is not changed, no protruding objects are added, and the approach and departure angles remain unmodified. Below is additional information: 1. Illegal modifications: Driving a vehicle with illegal modifications on public roads will result in the vehicle being impounded by traffic authorities, the illegal modifications confiscated, and the owner ordered to restore the vehicle to its original condition, along with a fine of 200 yuan. 2. Important notes: Remember that firefighting red, engineering emergency yellow, and the upper white and lower blue color scheme for national administrative law enforcement are reserved for state use. These colors cannot be applied to ordinary private vehicles.
3
5
Share

How long does it take for the owner to arrive after using the Traffic Management 12123 One-Click Vehicle Move service?

After the owner applies for the "One-Click Vehicle Move" service, the system will notify the blocking owner to move their vehicle within 10 minutes. If the vehicle is not moved 10 minutes after the notification is sent, the owner can click the "Reminder" button, and the system will notify the blocking owner again. If the blocking owner has not downloaded or registered the app, the system will notify them via SMS using the phone number registered during license plate registration. If the owner still does not come to move the vehicle, the following solutions are available: 1. Contact the other party’s insurance company: Call the insurance phone number displayed on the other vehicle’s windshield and explain that you have had a minor incident with their vehicle and are in a hurry, requesting the owner to come and check. The insurance company will usually contact the owner to come. 2. Contact the management personnel: If you are blocked in a residential parking lot, first contact the parking lot management personnel. 3. Call 122 directly: Simply provide 122 with details such as the model, license plate, and color of the blocking vehicle, and 122 will immediately contact the other driver.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.