What Causes the Buick Engine Malfunction Light to Illuminate?

1 Answers
SaraMarie
07/29/25 9:20pm
Buick engine malfunction indicator light, it is normal for the engine malfunction indicator light to illuminate when the ignition switch is in the ON position. However, if the light comes on while the engine is running, it indicates a fault in the emission control system, possibly exceeding the allowable emission limits, and suggests a malfunction that could potentially damage the catalytic converter. Please reduce the pressure on the accelerator pedal until the indicator light stops flashing. The Buick Envision is a mid-size SUV produced by SAIC-GM Buick. The Buick Envision has a body length, width, and height of 4667mm, 1839mm, and 1696mm respectively. In terms of power, the Envision is equipped with a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine.
Was this review help?
4
2
Share
More Forum Discussions

Does the Geely GS have ESP?

Geely GS is equipped with an ESP system. The ESP dynamic stability system is standard across all models. The installation of ESP requires steering sensors, wheel sensors, skid sensors, lateral acceleration sensors, and others. Below are some relevant details: 1. ESP refers to the Electronic Stability Program, a patented technology by Bosch. The ESP system is essentially a traction control system, but unlike conventional traction control systems, ESP controls not only the drive wheels but also the driven wheels. 2. The function of ESP is to automatically intervene and correct the driver's actions when the vehicle is operated beyond its limits. 3. With ESP intervention, the system automatically controls throttle reduction and braking. This results in more controlled driving, making it difficult to perform skids, fishtails, or even drift maneuvers.
11
4
Share

How to Clear the Maintenance Information on the Volkswagen New Sagitar?

Here is the method to eliminate the maintenance reminder on the Volkswagen New Sagitar: 1. Turn off the ignition switch to ensure the vehicle is off. 2. Press and hold the "0.0" button on the dashboard. 3. While turning on the ignition switch, keep holding the "0.0" button without releasing it. 4. Pay attention to the information display on the dashboard; when text appears, release the "0.0" button. 5. Press the "0.0" button once again. 6. At this point, the maintenance light should be reset. If it hasn't reset, start the process from the beginning. Here is some related information: 1. When the maintenance light comes on, it indicates that the vehicle's scheduled maintenance period has arrived, and maintenance should be performed promptly. Not all vehicle models can be manually reset; some models require specialized equipment from the manufacturer to clear the code. 2. If you frequently drive in harsh environmental conditions, maintenance should be performed before the maintenance light comes on.
15
2
Share

How to Remove the Rear Seat of Changan Eado?

Firmly lift the rear seat cushion to reveal three screws. Removing these three screws will allow the complete removal of the rear seat. Below is relevant information about the Changan Eado: 1. The 2014 Changan Eado is equipped with two engines: a 1.5L turbocharged engine and a 1.6L naturally aspirated engine. 2. The 1.6L naturally aspirated engine has a maximum power of 92kW, a maximum torque of 160Nm, a maximum power speed of 6000 rpm, and a maximum torque speed range of 4000 to 5000 rpm. 3. The 1.5L turbocharged engine has a maximum power of 125kW, a maximum torque of 230Nm, a maximum power speed of 5500 rpm, and a maximum torque speed range of 1950 to 4500 rpm.
14
2
Share

What type of engine oil should be used for the new Mondeo 2.0T?

The new Mondeo 2.0T version uses 5W-30 semi-synthetic engine oil, while the 1.5T model requires 5W-20 full-synthetic engine oil. It is important to note that engine oils of different brands and specifications should not be mixed, as this can affect their performance and, in severe cases, damage the car's engine. Below is an introduction to the functions of engine oil: 1. Lubrication to reduce wear: The relative sliding between the engine's pistons and cylinders, as well as between the main shaft and bearings, causes wear. Engine oil forms a thick oil film between these sliding surfaces, separating the surfaces of the moving parts to reduce wear. 2. Cooling: Engine oil carries heat back to the oil tank and then dissipates it into the air, helping the radiator cool the engine. 3. Cleaning: Engine oil cycles carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, flushing away dirt generated on the parts through the flow of the lubricating oil.
1
5
Share

What are the differences between the Prado and the Highlander?

There are several differences between the Prado and the Highlander: 1. Appearance: The Highlander is larger than the Prado and has a bigger displacement, making it look more imposing. The Prado's front grille is vertical, while the Highlander's is horizontal. 2. Performance: In terms of road conditions, the Highlander's off-road performance is stronger than the Prado's, with better adaptability and a more stable chassis. At speeds of 130 km/h, the Highlander does not feel unstable, whereas the Prado tends to feel unstable at high speeds, highlighting the difference in chassis. 3. Displacement: The Prado comes with two displacement options, 2.7L and 4.0L, while the Highlander offers three: 4.0L, 4.6L, and 5.0L. 4. Comfort: Due to its larger size, the Highlander provides better comfort. Even the base model of the Highlander is much better than the Prado in this regard. Even when traveling with many people and a lot of luggage, the Highlander's spaciousness and comfort surpass those of the Prado.
16
4
Share

How to Use the Cruise Control on the Grand Cherokee?

Press the cruise control switch located on the right-hand side switch group of the steering wheel. Once the speed meets the required conditions, press the set button to maintain the current speed. The plus and minus buttons next to it are for acceleration and deceleration. Below is an introduction to cruise control: 1. In principle, cruise control should be used on highways or fully enclosed roads. On non-enclosed roads, complex road conditions are not conducive to traffic safety. On national highways, some tractors lack sufficient power and may suddenly emerge from small intersections, posing a serious threat to vehicles on the highway. Under cruise control, drivers may be caught off guard. Repeated braking also makes it difficult to maintain a stable cruise control state, defeating the purpose of cruise control. 2. It is prohibited to use cruise control in rainy or snowy conditions. 3. It should also be disabled on winding mountain roads or roads with too many curves. Normally, when navigating curves, appropriate acceleration is needed to provide greater steering force. Under cruise control, the vehicle automatically maintains a constant speed, with the throttle controlled by the onboard computer, which can pose dangers when driving on curves. Under such conditions, drivers should appropriately control the vehicle's speed.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.