···
Log in / Register

What Causes the Brake to Shake?

4 Answers
VeraRose
07/29/25 10:42pm

The reasons for feeling brake shake when pressing the brake pedal are as follows: 1. The brake disc surface is uneven, with excessive radial runout. During braking, the brake pads intermittently contact the brake disc, causing fluctuating braking force and resulting in vehicle vibration, especially noticeable when lightly pressing the brake. 2. Significant deviation in wheel alignment data, particularly incorrect front wheel alignment angles or excessive toe-in. This makes the vehicle difficult to control during acceleration, with slight but noticeable discomfort while driving. 3. Tire pressure is either too high or too low. Overinflated tires cause more severe vibration at higher speeds, while underinflated tires lead to a floating sensation and pulling to one side. Specific tire-related causes of brake shake include: 1. Wheel rim deformation. When mounted on a deformed rim, the tire also deforms, leading to an uneven surface and unbalanced wheel dynamics, causing vibration while driving. 2. Abnormal tire wear. Due to incorrect wheel alignment or rim deformation, the tire surface wears unevenly, resulting in vehicle vibration during driving.

Was this review help?
20
2
Share
MacThomas
08/15/25 11:57pm

Recently, I've been feeling a shaking sensation when braking, with both the steering wheel and pedals vibrating, which feels quite unsafe. It might be due to uneven brake rotors caused by frequent braking leading to warping, or possibly wheel hub deformation affecting the entire braking system. Sometimes, improperly installed brake pads can cause uneven wear, with one side wearing more than the other. This is more noticeable at high speeds, causing the car to shake. I later visited a repair shop, and the mechanic suggested resurfacing the brake rotors or replacing some parts. Early inspection and repair are crucial to avoid brake failure and potential accidents, ensuring safer daily driving.

Was this review help?
13
4
Share
Expand All
DeGenesis
10/18/25 4:28am

As a car enthusiast, when I encounter brake shudder, I immediately think of braking issues. The most common cause is warped disc brakes, where uneven friction during braking creates shudder; loose wheel bearings or out-of-round hubs can also contribute; unevenly worn brake pads are another culprit. It's more likely to occur in hot weather. I recommend checking brake system thickness and tire balance, and performing regular maintenance like cleaning calipers to prevent it. Don't underestimate this shudder—it could lead to longer braking distances and doubled danger.

Was this review help?
7
0
Share
Expand All
Octavian
12/01/25 5:06am

Brake shaking indicates a potential brake system malfunction that requires immediate attention. Possible causes include warped brake rotors, misaligned wheel axles, oil-contaminated brake pads, or excessive wear. This directly leads to unstable braking and poses high risks during high-speed turns. If you notice any abnormalities, don't hesitate—pull over immediately to inspect or head straight to a repair shop. Safety should always come first, as negligence may lead to irreversible consequences.

Was this review help?
2
4
Share
Expand All
More Forum Discussions

Is it illegal to modify a Wrangler into a bigfoot vehicle?

Modifying a Wrangler with 4 bigfoot tires is legal. The legal modification scope for a Wrangler includes exterior modifications and interior modifications. The specific legal modification scope for a Wrangler is as follows: Exterior modifications: Body color modifications can be applied for at the vehicle management office. However, there are three colors that cannot be modified: fire engine red, engineering rescue yellow, and the national administrative law enforcement blue and white combination. For body wraps, national regulations stipulate that the area covered by the wrap must not exceed 30% of the total vehicle area. Small decorations and body decals are also allowed. Interior modifications: Adding navigation systems, dash cams, parking sensors, etc., are considered modifications, and these are all permissible. For the interior, modifications are generally allowed as long as they do not affect driving safety. However, seats cannot be removed, and the vehicle's structural features registered with the vehicle management office cannot be altered without authorization.
18
3
Share

How to Play Phone Music via Bluetooth in Buick GL8?

Press the Bluetooth function key or BD key on the car multimedia panel, or find the Bluetooth function switch via the icon key to turn on the car Bluetooth. Enable the Bluetooth function on your phone and set the phone Bluetooth to be visible to all, searchable, or open for detection. Search for Bluetooth devices on your phone, select the found device for pairing, and enter the pairing password to complete the connection. You can make and receive calls via the car Bluetooth, play music on your phone, and enjoy the music through the car Bluetooth device.
1
0
Share

What are the advantages of the Jetta?

Jetta's advantages include affordability, fuel efficiency, high reliability, model strengths, and powertrain advantages. Below are the specific advantages of the Jetta: Affordability, Fuel Efficiency, and High Reliability: The mid-range sedan incorporates high-end engine technology and safety features, utilizing advanced multi-point fuel injection technology. All models are equipped with a three-way catalytic converter, enhancing the environmental performance of the mid-range sedan. Model Strengths: New additions include chrome grille decorations, and the fashionable models are fitted with 185/60R15 tires and 15-inch rims. The new car comes standard with a 6-way manual driver's seat adjustment, headlight height adjustment, electric trunk opening, dual front airbags, and an anti-glare rearview mirror among other basic features. Powertrain Advantages: Available with two gasoline engines: a 1.4L and a 1.5L. The 1.4L engine delivers 66kW and 132N·m of power, while the 1.5L engine produces 80kW and 150N·m. These two engines are paired with a 5MT and an Aisin 6AT transmission, respectively.
12
0
Share

What BMW models have frameless doors?

BMW models equipped with frameless doors include the BMW 2 Series, BMW 4 Series, BMW Z4, BMW 3 Series GT, BMW 5 Series GT, and BMW i3. The drawbacks of frameless doors include poor sound insulation and susceptibility to window malfunctions. The disadvantages of frameless doors are as follows: Poor sound insulation: The most noticeable drawback is the mediocre sound insulation effect. Additionally, in the event of a rollover accident, the structural support is comparatively weaker, making frameless doors less safe than framed ones. The sealing strip for frameless doors is installed on the roof frame. When the door is opened or closed, the window automatically lowers by a certain distance, which can waste some time. Susceptibility to window malfunctions: Since the windows of frameless doors automatically lower or rise when the door is opened or closed, the window regulators are used more frequently, leading to a higher likelihood of malfunctions. Consequently, with prolonged use of frameless doors, the window regulators may need replacement. Moreover, because the glass in frameless doors is not fixed by a door frame, it is more prone to damage from impacts. The cost of replacing the glass can be significant when it gets damaged.
1
4
Share

What to Do About Leaking Car Windows?

When replacing, remind to apply more sealant; if the issue persists, the only solution is to replace the glass. Avoid washing the car for three days after sealing and use an air gun to dry it thoroughly, which generally resolves the problem. After the moisture has completely dried, apply glass sealant. When replacing the glass, to prevent poor sealing, ensure the upper edge of the glass is thoroughly cleaned. First, remove the windshield, clean the frame thoroughly, then apply black waterproof glass sealant. Next, position the windshield correctly, apply the sealant, and secure the edges with transparent tape for fixation. Remove the tape after 12 hours.
17
2
Share

Solutions for BYD F3's False High Water Temperature?

Due to the mixing of the combustion chamber and water channel, water may drain from the discharge pipe under such circumstances, or white smoke may be emitted, which naturally leads to frequent water shortage in the radiator. One phenomenon is that the engine oil turns white due to water presence, and another scenario is the mixing of water channels, which results in poor heat dissipation in the car's cylinder block. The car's impeller may slip or become completely stuck, causing the belt to break. Another situation is impeller deformation. Both can lead to excessively high engine water temperature. In such cases, it's advisable to realign the belt or replace the impeller.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.