What Causes the Brake Noise in the TACQUA?
4 Answers
The reasons for brake noise in the TACQUA are as follows: 1. Metal hard spots on the brake pads: If there are tiny metal particles on the brake pads, they will produce a sharp noise when braking. You can try slamming the brakes a few times or grinding and replacing the brake pads to solve the noise issue. 2. Severe wear on the brake disc: If the car's brake disc has been used for too long, it will develop a deep groove at the position where the brake pads rub, causing noise when braking. If the groove is not deep, you can solve it by grinding the edges of the brake pads. If the groove is deep, you will need to replace the brake disc.
I've been driving my Tacqua for a long time, and the sudden squealing of the brakes is really annoying. There could be several reasons: First, the brake pads are severely worn, either too thin or uneven, causing a sharp noise when braking. Second, the brake discs have rusted, especially after rain or in humid environments, where the rust layer causes friction and noise—try lightly pressing the brakes a few times to see if it wears off. Third, foreign objects might be stuck inside, like small stones getting into the brake pad gap, causing a squeaky noise when braking. Fourth, the material of the brake pads might be the issue, with hard spots causing uneven contact and noise. I recommend checking the thickness of the brake pads; if it's below 4mm, replace them. Avoid sudden braking in daily use to extend their lifespan. Also, insufficient lubrication of the guide pins could cause problems, but for more complex issues, it's best to visit a professional shop—safety should never be taken lightly.
Friends who drive the Tacqua, brake noise can have several common causes. One possibility is that newly replaced brake pads are still in the break-in period, and some noise within the first 200 kilometers is normal. Another reason could be rust or irregular surfaces on old brake discs, where uneven areas create louder friction sounds. It might also be due to insufficient lubrication in the brake caliper guide pins, causing dry metal friction. Additionally, for city SUVs like the Tacqua, frequent braking can overheat and warp the pads, leading to noise. When driving daily, try to brake gently and check the system regularly. Simple cleaning of the brake grooves might solve minor issues, but avoid DIY fixes—visit a repair shop for proper tool diagnostics, as braking safety is critical.
I've been annoyed by the squeaky brakes on my Tacqua after long drives. Common causes include worn-out brake pads or rust on the discs after rain, which can create sharp noises. It might also be due to improper installation with excessive clearance. Try lightly pressing the brakes—if the noise persists, it's time for a check-up. Never ignore this issue, as it could worsen into reduced braking efficiency. Always pay extra attention before driving to avoid emergencies.
