···
Log in / Register

What Causes the Brake Noise in BMW 3 Series?

3 Answers
DeJustin
07/29/25 11:27pm
Brake noise in BMW 3 Series may be caused by excessive wear of the brake discs or uneven wear due to the owner's driving habits. It is recommended to have the vehicle inspected as soon as possible for brake disc examination, cleaning, or replacement to ensure driving safety. The relevant details are as follows: 1. Further Confirmation: The noise may be due to excessive wear between the brake pads and brake discs, or it could be an issue with the assembly of the brake pads. A more detailed diagnosis is required to determine the exact problem. 2. ABS: Noise may occur when braking because the ABS system is functioning normally. Excessive wear of the brake discs and pads can also cause noise. The actual working process of the ABS system in a car is a cyclic process of locking and releasing the brakes.
Was this review help?
11
1
Share
SanSavannah
08/16/25 2:10am
As a long-time BMW 3 Series owner who's driven it for years, brake squealing is an all-too-common issue. The most frequent causes are worn-out brake pads becoming thinner or scratched/uneven brake rotors creating squeaks during friction. It's particularly common after rain or car washes when surface rust temporarily forms. Newly replaced brake pads may also produce noise during the break-in period. Additionally, dust or gravel trapped between brake components can cause sounds. I make it a habit to regularly check pad thickness - replacement is generally recommended when below 3mm. Safety first! Never delay this - I advise having technicians measure brakes during routine maintenance to prevent accidents caused by compromised braking performance.
Was this review help?
1
3
Share
Expand All
JuliaLee
10/19/25 2:09am
When I first drove the BMW 3 Series, the brakes kept squeaking, which really scared me. After checking some information, I found that the possible reasons could be that the brake pads were made of too hard a material—sometimes this is an issue with the original BMW pads. Alternatively, the brake discs might be uneven or worn out, making the noise more noticeable at low speeds or when stopping. Cold weather can also harden the rubber seals, causing friction. Once, I took it to a repair shop, and after they cleaned off the dust and applied lubricant, the noise stopped. It’s important to note that if the sound is sharp and frequent, it’s likely due to aging parts that need replacement. Never ignore unusual noises in daily driving—safety is no small matter.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

How to use the cigarette lighter in Audi A6L?

Audi A6L cigarette lighter usage method: 1. Turn on the car power and insert the cigarette lighter into the car power socket; 2. Press down to lock; 3. The cigarette lighter starts heating and will pop out when the heating wire reaches the required temperature. Taking the Audi A6L 2021 40TFSI Luxury Elegance model as an example, it is equipped with a 2.0T 190 horsepower L4 turbocharged engine, with a maximum power of 140 kW and a maximum torque of 320 Nm. The Audi A6L 2021 40TFSI Luxury Elegance model has body dimensions of: length 5038mm, width 1886mm, height 1475mm, and a wheelbase of 3024mm.
5
1
Share

Is the first maintenance of a new car free?

Is the first maintenance of a new car free? The first maintenance is free, and it is performed when the car has traveled approximately 5,000 kilometers. It refers to the first maintenance after the vehicle has been driven. The maintenance items include: 1. Changing the engine oil, oil filter, air conditioning filter, and air filter; 2. Checking the levels of coolant, battery fluid, and windshield washer fluid; 3. Checking the brake and clutch fluid levels and the power steering fluid level; 4. Inspecting all oil pipe interfaces in the system for leaks; 5. Checking the front and rear lights; 6. Checking tire pressure and wear, and tightening screws according to the specified torque. The precautions for the first car maintenance are: 1. Make an appointment with the 4S store in advance; 2. Bring the vehicle license and maintenance manual.
10
4
Share

Where is the headlight height adjustment button for the 10th-generation Accord?

The headlight height adjustment for the 10th-generation Accord is located in the engine compartment. There is a white plastic screw behind each headlight. Turning it clockwise with a flat-head screwdriver will raise the headlight, while turning it counterclockwise will lower it. Always switch to low beams in advance when meeting oncoming traffic to avoid sudden glare. Avoid using high beams when overtaking, as this can impair your judgment of width. When encountering oncoming vehicles using high beams, slow down to a safe speed and alternately flash your high and low beams as a signal. For roads beyond blind spots, you can use your horn as a warning. The Accord's body dimensions are 4930mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 2775mm. It features front-wheel drive and has a 65-liter fuel tank.
19
1
Share

What should be noted when using a new car?

Things to note when using a new car are: 1. The car needs to warm up after starting; 2. Avoid overloading; 3. Do not drive long distances or at high speeds; 4. Use higher quality fuel; 5. Shift gears in a timely manner; 6. Do not slam on the brakes during the break-in period; 7. Avoid frequent use of emergency braking. New car maintenance items include: 1. Changing the engine oil, oil filter, and cleaning the air filter; 2. Checking whether the car's coolant level is normal; 3. Inspecting the car's brakes and undercarriage components for scratches; 4. Checking if the power steering fluid level is normal and if there are any oil leaks at the pipe connections; 5. Examining the condition of the generator, air conditioning, water pump, and belts for aging and tension; 6. Checking tire pressure and wear condition, and rotating the tires if there is wear.
12
0
Share

How to Remove the Steering Wheel of a Chery A3?

Method to remove the steering wheel of a Chery A3: 1. Disconnect the battery; 2. Turn the steering wheel approximately 90 degrees; 3. Insert a flat-head screwdriver into the hole behind the steering wheel; 4. Insert the tip of the screwdriver between the retaining clip and the airbag hook, causing the airbag side to automatically pop slightly towards the seat; 5. Turn the steering wheel 180 degrees and continue to pry open the retaining clip; 6. Remove the airbag, disconnect the yellow safety clip behind the airbag, and take out the airbag; 7. Unplug the airbag coupling coil connector located above inside the steering wheel, and use an M12 spline to loosen the central fixing bolt of the steering wheel counterclockwise; 8. Remove the steering wheel.
15
1
Share

How to Use the Mechanical Key of Sagitar?

The method to use the mechanical key of Sagitar is as follows: 1. Insert the key into the ignition and turn it to the 'on' position; 2. Place the gear lever in the neutral position; 3. Press the clutch pedal all the way down and turn the key to the 'start' position. Taking the 2021 manual Fashion Smart Connection Edition Sagitar as an example, its body dimensions are: length 4753mm, width 1800mm, height 1462mm, with a wheelbase of 2731mm, a fuel tank capacity of 50 liters, and a minimum ground clearance of 2731mm. The 2021 manual Fashion Smart Connection Edition Sagitar features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.