What causes the BMW 5 Series to suddenly have difficulty steering at times?

1 Answers
Jess
07/24/25 7:53am
The reasons why the BMW 5 Series sometimes suddenly has difficulty steering include insufficient power steering fluid, low tire pressure, or faults in the steering gear and power steering pump. The specific causes and solutions are as follows: Insufficient power steering fluid: Power steering fluid is a medium oil used in the car's power steering pump, which helps transmit steering force and provides cushioning. When the power steering fluid is insufficient, the steering will feel heavy and stiff. Solution: Regularly replace the power steering fluid. Low tire pressure: Low tire pressure increases the contact area between the tires and the road surface, leading to greater friction and making steering more difficult, resulting in a heavy steering wheel, which is not conducive to driving safety. Solution: Check the tire pressure. Faults in the steering gear or power steering pump: The steering gear and power steering pump are also crucial for car steering. Any faults in these two important components can make steering difficult. Solution: Promptly repair or replace them.
Was this review help?
4
3
Share
More Forum Discussions

Are There Manual Transmission Cars with Turbo?

Manual transmission cars with turbo do exist. Some models equipped with turbocharged engines also offer manual transmission configurations. Definition of Turbocharging: Turbocharging utilizes the exhaust gases from the engine to drive the turbine blades, which in turn rotates the coaxial impeller, forcing more air into the air filter and pressurizing it into the cylinders. This increases the air pressure and density within the engine. Advantages of Turbocharging: Without increasing the engine displacement, turbocharging can significantly enhance the engine's output power and torque, with improvements of up to 30%. Since it is driven by the engine's exhaust gases, it does not waste engine power and offers better fuel economy.
2
1
Share

What are the reasons why the rear car door cannot be opened?

Reasons why the rear car door cannot be opened: Child lock is activated: When closing the car door, always remember to check if the child lock is in the off position. If the door cannot be opened, use a flathead screwdriver to turn the child lock to the off position. Lock cable malfunction: When this issue occurs, the door cannot be opened from inside the car because the malfunctioning cable directly affects the lock mechanism, preventing it from opening. Hinge lock post deformation: After the car door is subjected to external force, the hinge and lock post may become deformed, which is also one of the reasons why the door cannot be opened. Door limiter malfunction: When this problem occurs, it becomes very difficult to open the door, or it may not open at all. The solution is to replace the door limiter with a new one, allowing the door to open and close smoothly.
10
2
Share

What Causes Increased Fuel Consumption in Motorcycles After Long-Term Use?

The reasons for increased fuel consumption in motorcycles may include: excessively large carburetor jets, improperly adjusted carburetor air-fuel mixture, or issues with the fuel system. Specific causes: Driving system, transmission system, and braking system: Check whether the front and rear wheel axle bearings are damaged or adjusted too tightly, or lack lubrication; whether the drive chain is too tight; and whether the front and rear brakes have poor return causing resistance. Engine aspects: After cylinder boring, use a cylinder pressure gauge to measure; the pressure should not be lower than 7.5 kg/cm2. Next, inspect the ignition system, including whether the high-voltage spark energy meets standards and the ignition timing is accurate. Then, consider whether the carburetor is improperly adjusted. Additionally, issues such as incorrect valve timing in the valve train and piston connecting rod mechanism, or intake and exhaust valves not sealing properly, can be quite complex.
9
2
Share

What is the speed limit when passing through traffic lights on urban roads?

When passing through traffic lights or zebra crossings, there is no specific speed limit, but the speed must not exceed the road's designated limit. If the traffic light is located at an intersection or a turn, the speed should not exceed 30 km/h. Generally, the speed limit ranges between 30 to 60 km/h. Relevant regulations: Motor vehicles passing through intersections must comply with traffic signals, signs, markings, or the directions of traffic police. When passing through intersections without traffic signals, signs, markings, or police direction, drivers should slow down and yield to pedestrians and vehicles with the right of way. Speed enforcement at intersections: To confirm a vehicle running a red light, three photos are required as evidence. These photos are taken before the vehicle crosses the stop line, after crossing the line, and upon entering the intersection. The photo of the vehicle entering the intersection clearly shows whether it forcibly passed during a red light. The three photos distinctly record the vehicle's movement during the red light. Electronic monitoring requires these three photos to confirm a red light violation. As long as the vehicle does not move further after crossing the line, it will not be penalized.
13
4
Share

Does Replacing a Water Pump Require Engine Removal?

Replacing a car's water pump does not require engine removal. The method for removing the water pump involves first removing the belt, then loosening the two tensioner bolts, and finally removing the three bolts on the water pump pulley. A damaged water pump should be replaced promptly, as failure to do so can affect the cooling system and potentially cause the engine to overheat. A faulty water pump may also lead to unusual noises during engine operation. Function of the Car Water Pump: The car water pump is primarily used for engine cooling, preventing the engine from overheating and "boiling over." The water pump is typically located near the engine's crankshaft and contains water. It is important to replenish the water when levels fall below the standard. Daily Maintenance of the Water Pump: The engine water pump is one of the essential components of a car. During daily use, it is important to maintain and service the water pump to ensure the coolant level is sufficient. The water pump should be inspected every 20,000 kilometers.
20
3
Share

Can a Car Be Sold and Transferred Across Provinces?

A car can be transferred across provinces. You need to go to the vehicle management office where the car was originally registered to complete the outbound transfer procedures. Then, with the relevant documents, you can proceed to the vehicle management office in the destination province to complete the transfer and registration process. Outbound Transfer Procedures: During the outbound transfer process, the original license plate and vehicle registration certificate will be confiscated, and a temporary license plate valid for 30 days will be issued. This temporary plate must be carefully preserved, as it must be surrendered when completing the inbound transfer. The transfer process legally completes the change of vehicle ownership, ensuring the legitimacy of the vehicle's origin. Legal Provisions: Article 18 of the "Regulations on the Registration of Motor Vehicles" stipulates that when the ownership of a registered motor vehicle is transferred, the new owner must apply for the transfer registration at the vehicle management office within 30 days from the date of delivery. Before applying for the transfer registration, the owner must resolve all traffic violations and accidents related to the vehicle.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.