···
Log in / Register

What Causes the BMW 5 Series Air Conditioning to Not Cool?

4 Answers
OBriella
07/30/25 2:48am

The main reasons why the BMW 5 Series air conditioning does not cool include: lack of refrigerant; damaged air conditioning flaps making it difficult to cool; excessively dirty condenser; damaged air conditioning compressor, throttle valve, or expansion valve; aging or loose belts, etc. Here are the details: 1. Solutions: Add refrigerant from the low-pressure side; release some refrigerant from the maintenance port on the low-pressure side of the air conditioning system; tighten the air conditioning compressor drive belt; replace qualified refrigerant and refrigeration oil; replace the compressor. Remove the installed GPS and test the air conditioning to see if it still does not cool. 2. Inspection: First, use a gauge to measure. The static pressure is about 5bar, which is normal. Use a computer diagnostic plan to check the power supply voltage of the electromagnetic clutch. The multimeter measurement result is 12V, which is normal. Then, measure the resistance of the compressor electromagnetic clutch. The result is infinite, while the normal resistance range for an electromagnetic clutch is 2.5-15 ohms. This exceeds the normal range, indicating that the compressor is damaged.

Was this review help?
9
3
Share
StAlexa
08/16/25 9:07am

The air conditioning suddenly stopped blowing cold air while driving, and I've encountered this several times in my BMW 5 Series. It's really unbearable. The most common reason for the AC not cooling is a refrigerant leak—when the liquid used in the car runs out, the pressure drops, and it gets hot. Another issue could be the compressor, which works near the engine; if it fails, the entire system shuts down. Or, the fan might not be spinning, preventing hot air from dissipating. Check the AC filter—if it's clogged with dust, cold air won't flow in. Additionally, small components like fuses and relays can burn out, cutting off the electrical current after starting the car. My advice is to pull over, inspect the filter and fuse box first. If you can't fix it, head to the dealership immediately—don't delay in summer heat, as it affects driving safety. Regular maintenance should include cleaning the AC system.

Was this review help?
10
4
Share
Expand All
BethanyLee
10/21/25 8:25am

Air conditioning not cooling is a common issue, and I've repaired many cars including the BMW 5 Series. First, check if the refrigerant level is sufficient—if the Freon has leaked, low levels will result in no cooling effect. The compressor might be faulty; if its internal valves are damaged or not working, the entire system fails. Another possibility is a clogged condenser, where external dirt prevents heat dissipation, and the fan might not spin. Electrical components like blown fuses or faulty sensors should also be inspected, especially since BMW's electronic controls can be quite sensitive. Quick diagnosis method: Turn on the AC and listen for sounds—if there's no humming noise, the compressor might be the issue. If airflow is weak, check the filter. It's best to visit a professional shop for leak detection with specialized tools, rather than making minor fixes that could affect the entire vehicle.

Was this review help?
5
3
Share
Expand All
NoraLee
12/05/25 2:04am

The BMW 5 Series air conditioning not cooling is usually due to insufficient refrigerant, with system leaks commonly occurring in the pipes or connections. Compressor failure is another major cause; if it makes little noise while working, there's no cooling. A non-functioning fan can also lead to overheating, and a clogged condenser poses an even bigger issue. For a simple check: ensure the filter is clean and unblocked, then inspect the fuses and relays, as they are prone to burning out and causing power failure. It's advisable to visit a repair shop promptly to avoid affecting driving visibility.

Was this review help?
5
3
Share
Expand All
More Forum Discussions

how to get car keys glove

The most reliable way to retrieve car keys locked in the glove compartment is to use a spare key, which is the safest and cheapest solution. If a spare isn't available, your next best options are using a long, thin tool like a coat hanger or a professional auto locksmith. Calling a locksmith is often the most effective method, though it comes with a cost. Avoid breaking the glove box latch yourself, as this can lead to expensive repairs. First, double-check if you have a spare key. Many people keep one with a family member or in a magnetic box hidden on the car's frame. This is by far the easiest fix. If no spare exists, you can try the coat hanger method . Straighten a wire coat hanger, create a small hook at one end, and carefully feed it through the seal around the glove box door. The goal is to hook the locking mechanism or the keys themselves. This requires patience to avoid scratching the dashboard interior. Modern cars with electronic locking glove boxes may not be susceptible to this method. For a guaranteed and damage-free solution, contact a professional auto locksmith. They have specialized tools to non-destructively unlock the compartment. While this is a paid service, it's cheaper than repairing a broken latch. Solution Method Estimated Cost Success Likelihood Risk of Damage Time Required Using a Spare Key $0 Very High None 5-15 minutes DIY Tools (Coat Hanger) $0 - $10 Medium Medium 15-45 minutes Professional Auto Locksmith $75 - $150 Very High Very Low 30-60 minutes Dealership Service $100 - $250+ Very High Low 1-2 hours+ If your car is newer, check your vehicle's mobile app. Some manufacturers like BMW, Tesla, and GM offer features that allow you to lock and unlock various compartments remotely. As a last resort, a dealership can help, but they are often the most expensive and time-consuming option.
18
4
Share

how to connect aux to car

Connecting an AUX cable to your car is usually straightforward. You'll need a standard 3.5mm aux cable. First, locate your car's AUX input port , which is typically found on the center console, inside the armrest, or on the dashboard. It's a small, round jack port, often labeled "AUX" or with a headphone icon. Plug one end of the cable into this port and the other end into the headphone jack of your phone or music player. Select the "AUX" input source on your car's stereo head unit, and you should hear the audio immediately. If you don't hear sound, start with basic troubleshooting. The most common issue is an unselected or incorrect audio source. Ensure your car's stereo is set to "AUX" or "AUX IN" and that your device's volume is turned up sufficiently. A faulty or low-quality cable is another frequent culprit. Common AUX Connection Issue Likely Cause & Solution No sound Source not set to AUX on car stereo; incorrect cable connection. Static or crackling Damaged/loose cable; dirt/debris in the AUX port. Clean port. Audio only from one side Cable not fully inserted; damaged cable (internal wire break). Low volume even at max Low output from the source device; poor quality cable. Buzzing/whining noise Engine electrical interference; try a ground loop isolator. For older cars without a built-in AUX port, you have a couple of options. An FM transmitter plugs into your device and broadcasts a signal to an empty FM station on your car radio. While convenient, audio quality can vary based on signal interference in your area. A more reliable solution is a cassette adapter if your car has a cassette player; this provides better sound quality than most FM transmitters. For a permanent, high-quality upgrade, consider installing an aftermarket stereo head unit with an AUX input or Bluetooth capability.
9
1
Share

how to do a tuneup on car

A basic car tune-up involves replacing the spark plugs, air filter, and engine oil and filter, along with inspecting other key components like the cabin air filter and PCV valve. For modern vehicles, the process is less about ignition timing and more about preventative maintenance to ensure optimal fuel economy, performance, and emissions. The core goal is to restore lost efficiency, not necessarily to boost power beyond factory specifications. The specific steps depend heavily on your car's make, model, and mileage. Always consult your owner's manual for the manufacturer's recommended service intervals. A standard tune-up for a car with over 60,000 miles typically includes: New Spark Plugs: Worn plugs cause misfires, rough idling, and poor acceleration. Iridium or platinum tipped plugs often last 100,000 miles. New Air Filter: A clogged filter restricts airflow to the engine, reducing power and fuel efficiency. Hold it up to a light; if you can't see light through it, replace it. New Engine Oil and Filter: This is the most critical routine service. It lubricates internal components and prevents wear. Inspections: Check the cabin air filter (for clean air inside the car), engine belts for cracks, PCV valve for proper function, and ignition coils if a misfire code is present. For a systematic approach, follow these steps. First, disconnect the negative battery cable for safety. Then, replace the air filter and spark plugs (one at a time to avoid mixing up ignition wires). Next, perform an oil and filter change. Finally, reconnect the battery. If your check engine light is on, using an OBD-II scanner to read diagnostic trouble codes should be your first step before any work begins. Common Tune-Up Component Typical Replacement Interval Key Benefit Engine Oil & Filter 5,000 - 7,500 miles (or per manual) Lubrication, engine longevity Engine Air Filter 15,000 - 30,000 miles Optimal fuel-air mixture, power Spark Plugs 30,000 - 100,000 miles Smooth ignition, fuel economy Cabin Air Filter 15,000 - 25,000 miles Improved interior air quality PCV Valve 60,000 - 100,000 miles Regulates crankcase pressure Serpentine Belt 60,000 - 100,000 miles Powers alternator, AC, power steering
4
4
Share

how to clean car exterior

The most effective way to clean your car's exterior is a two-bucket method with a pH-neutral car shampoo , using a grit guard in each bucket to prevent scratches. This process, which includes pre-rinsing, proper washing techniques, and thorough drying, is far superior to automatic car washes that can swirl your paint. For a showroom finish, regular waxing or sealant application is essential. The Core Principles: Avoiding Scratches The enemy of a clean car is micro-scratches and swirl marks , which are caused by dragging dirt across the paint. The two-bucket method is the industry-standard solution. One bucket holds your clean shampoo solution, while the second is filled with plain water for rinsing your wash mitt after each pass on the car. The grit guards at the bottom of each bucket trap dirt and prevent it from being redeposited onto your mitt. Step-by-Step Washing Process Pre-Rinse: Thoroughly rinse the entire car with plain water to loosen and remove loose dirt and debris. Wash from Top to Bottom: Start with the roof, windows, and hood, then work your way down to the dirtier lower panels and wheels. This ensures the grittiest water runs down onto areas you haven't cleaned yet. Use a Quality Wash Mitt: A soft, microfiber chenille wash mitt is ideal as it holds plenty of shampoo solution and lifts dirt away safely. The Two-Bucket Dance: Dip the mitt in the shampoo bucket, wash a section, then rinse it thoroughly in the rinse bucket before reloading with clean shampoo. Final Rinse: Use a steady stream of water, starting from the top, to sheet the water off and minimize drying time. Drying and Protection Never let the car air dry. Use a large, plush microfiber drying towel to gently blot and wipe the surface dry. For long-term protection, apply a synthetic sealant or a natural carnauba wax every 3-6 months. This creates a protective barrier that makes future cleaning easier and shields the paint from UV rays and contaminants. Step Recommended Product/Tool Key Benefit Frequency Pre-Rinse Pressure Washer or Hose Loosens abrasive dirt Every wash Shampoo pH-Neutral Car Shampoo Protects existing wax/sealant Every wash Wash Tool Chenille Microfiber Mitt Safely lifts dirt Every wash Drying Large Plush Microfiber Towel Prevents water spots Every wash Protection Synthetic Paint Sealant Long-lasting shine & protection Every 3-6 months Decontamination Clay Bar Kit Removes embedded contaminants 1-2 times per year
8
5
Share

how to get aux in old car

You have several reliable options to add an AUX input to an old car, ranging from simple plug-and-play devices to more involved stereo replacements. The best choice depends on your budget, technical comfort, and desired audio quality. The most common solutions are using an FM transmitter , a cassette tape adapter (if your car has a tape player), installing an aftermarket head unit , or using a specialized hardwired adapter that integrates with your factory radio. An FM transmitter plugs into your car's 12V power outlet (cigarette lighter) and broadcasts a short-range FM signal that your car radio can tune into. It's the easiest and cheapest method but can suffer from interference from local radio stations and generally offers the lowest sound quality. If your car is old enough to have a cassette player, a cassette tape adapter is a fantastic, low-cost option. You insert it like a tape, and it converts the audio from your phone into a magnetic signal that the tape head reads. The sound quality is typically much better and more consistent than an FM transmitter. For a permanent and high-quality solution, replacing the factory stereo with an aftermarket head unit is the best bet. Modern single-DIN or double-DIN units come with AUX, USB, and often Bluetooth. Installation requires some wiring knowledge but provides the best audio fidelity and modern features. A less-known option is a hardwired FM modulator or a specialized adapter that taps directly into the backend of your factory radio. These devices connect between the radio and its antenna, providing a clean, direct audio signal without the static of wireless FM transmission. They require more installation effort than a transmitter but less than a full stereo replacement. Method Estimated Cost Installation Difficulty Sound Quality Best For FM Transmitter $10 - $30 Very Easy (Plug & Play) Fair to Poor Temporary fix, lowest budget Cassette Adapter $10 - $20 Very Easy (Plug & Play) Good Cars with a functioning tape deck Aftermarket Head Unit $50 - $300+ Moderate to Difficult Excellent Permanent upgrade, best quality Hardwired FM Modulator $30 - $80 Moderate (requires wiring) Very Good Keeping factory look with good quality
4
2
Share

how to check title of car

The most reliable way to check a car's title is to use its Vehicle Identification Number (VIN) to access official state-level databases and the National Motor Vehicle Title Information System (NMVTIS). This process reveals crucial information like the title's current status (clean, salvage, rebuilt), odometer readings, and whether the car has been branded as a lemon or has undisclosed damage from accidents or floods. You can typically start this check on your state's Department of Motor Vehicles (DMV) website, often for a small fee. Before you even get to the official check, you should locate the VIN. This 17-character code is usually found on the driver's side dashboard (visible through the windshield), on the driver's side doorjamb, or on vehicle registration and insurance documents. Here’s a breakdown of the main methods, from quick free checks to comprehensive paid reports: Method Source Cost Key Information Provided Best For VIN Check State DMV Website/Office $5 - $15 Official title status, lienholder details, registration history. Verifying the seller's information is correct. NMVTIS Report Approved NMVTIS Provider (e.g., VehicleHistory.com) ~$10 Title brand history (salvage, junk, flood) across multiple states, odometer readings, total loss history. A federally-sanctioned, comprehensive title history check. Third-Party Report Services like Carfax or AutoCheck $39 - $99 Title history, accident reports, service records, number of owners. Getting a detailed, consumer-friendly report with extensive data. Visual Inspection Physical Title Document Free Matching VIN, owner name, and title brand (e.g., "Salvage") on the paper. A preliminary check before purchasing from a private seller. Insurance Check Your Insurance Agent Free (Inquiry) They can often tell you if a car has a branded title that affects insurability. Understanding potential insurance costs and limitations. When you get the title document from a private seller, inspect it carefully. Ensure the VIN on the paper title matches the VIN on the car exactly. Look for any "brands" or notations like "salvage," "rebuilt," or "flood." A "clean title" is what you want, meaning it has no major damage history. Be very cautious if the seller only has a duplicate title, as this can sometimes be a red flag. For a used car purchase, combining a visual inspection of the physical title with a paid NMVTIS or Carfax report offers the best protection.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.