What causes the blurry reversing image in Emgrand GL?
2 Answers
The reasons for the blurry reversing image in Emgrand GL are: 1. The camera lens is covered with dust or dirt; 2. Water leakage in the camera lens; 3. Issues with the brightness and contrast of the central control display; 4. Excessive light causing unclear images; 5. Low resolution of the central control screen; 6. Poor line contact. Solutions for the blurry reversing image in Emgrand GL: 1. Clean the camera with a clean cloth; 2. Remove the camera, seal it with glue, or replace it with a higher-quality camera; 3. Adjust the brightness and contrast in the car system until the image is clear; 4. Check the condition of the lines.
I think the camera itself is mostly to blame. Look, that little camera is exposed outside the car, enduring wind and rain. With dirt and water stains covering it, the image is bound to be unclear. Once, I deliberately didn’t clean that area after washing the car, and at night, the rearview camera looked like it was covered with a layer of gauze. Sometimes, the lens inside gets loose or wears out, especially in cars that are five or six years old—once the plastic deforms, the image becomes blurry. My suggestion is simple: while washing the car, ask the attendant to thoroughly clean the camera area. If that doesn’t help, check if it’s actually broken—replacing it with a new OEM one will make an immediate difference. Also, if water gets into the wiring around the rear license plate light and causes a short circuit, it can lead to unstable signals and fuzzy images. It’s best to check that area too.
