What Causes the Blue Screen in the Nissan Sylphy's Reversing Camera?

1 Answers
McBlakely
07/29/25 6:34pm
New Nissan Sylphy reversing camera blue screen is caused by a fault in the camera or video line. Troubleshooting: The display will show a blue screen if there is no video signal input, which could be due to signal input or camera issues. Check if the video connector is loose. If it is not loose, inspect whether the camera is functioning properly. Reversing Camera: The reversing camera, also known as a parking assist system, or reversing visual system, or onboard monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. Choosing a Reversing Camera: When selecting a reversing camera, ensure it is compatible with your vehicle model. Consider factors such as camera model, power voltage, screen size, waterproofing, shock resistance, and anti-interference capabilities.
Was this review help?
16
0
Share
More Forum Discussions

What to Do If There's Too Much Engine Oil in the Car?

The solutions for excessive engine oil in the car are: 1. Remove the oil drain plug to release the oil; 2. Use an oil pump to extract the oil. The functions of engine oil are: 1. Lubrication and friction reduction; 2. Assisting in cooling and temperature reduction; 3. Sealing and leakage prevention; 4. Rust and corrosion prevention; 5. Shock absorption and cushioning. The steps for changing engine oil are: 1. Run the engine to reach operating temperature; 2. Engage the handbrake and lift the vehicle; 3. Unscrew the oil filter and drain the oil; 4. Apply new oil to the gasket of the new filter; 5. Pour the new oil into the oil pan; 6. Check for leaks under the engine; 7. Lower the vehicle, check the oil dipstick, and start the engine; 8. Turn off the engine and recheck the oil level.
6
1
Share

Does scraping the car chassis have a big impact?

The exhaust pipe is located inside the chassis, so obstacles like speed bumps won't touch it. There is a layer of protective coating on the chassis surface, and minor scrapes generally don't cause significant issues. Here is additional information: 1. Inspection Method: When the car chassis is scraped by an unknown object, if you can't determine whether it affects driving safety and still feel uneasy, it's recommended to take the car to a 4S shop or repair shop for inspection. Most repair shops have chassis lifts, and once the vehicle is raised, any scratches or damage on the chassis surface will be immediately visible. If it's just a scratch on the steel plate, applying some paint will suffice. However, if any pipes are damaged, a thorough inspection and repair will be necessary. 2. Precautions: When driving over road hazards such as potholes, depressions, or grooves that are prone to scraping the chassis, it's important to slow down and avoid them if possible. A head-on collision won't do any good. Additionally, drivers should also be cautious of curbs and speed bumps on the roadside.
2
3
Share

How to Extract Oil from a Car?

To extract oil from a car, follow these steps: 1. Find a flexible tube longer than the oil dipstick and insert it into the dipstick hole when the engine is cold. 2. Connect one end of the tube to a suction nozzle and the other end to a plastic water bottle, then press the nozzle to extract the oil. The types of oil in a car include: engine oil, gasoline, lubricating oil, and hydraulic oil. The functions of engine oil are: 1. Lubrication and friction reduction; 2. Assisting in cooling; 3. Sealing and leak prevention; 4. Rust and corrosion protection; 5. Shock absorption. The method for changing engine oil is: 1. Run the engine until it reaches operating temperature; 2. Engage the handbrake and lift the vehicle; 3. Unscrew the oil filter and drain the oil; 4. Apply new oil to the gasket of the new filter; 5. Pour new oil into the oil pan; 6. Check for leaks under the engine; 7. Lower the vehicle, check the oil dipstick, and start the engine; 8. Turn off the engine and recheck the oil level.
17
2
Share

How Many Turns to Lock the Steering Wheel When Centered in Subject 2?

In Subject 2, locking the steering wheel when centered is exactly one and a half turns. The same applies when returning the wheel—simply ensure the steering wheel emblem returns to the upward position. Subject 2 Exam: During the reverse parking test in Subject 2, you can lock the steering wheel in either direction and then turn it back two full turns to center it. When returning half a turn, there's no need to worry about the exact degrees—just make sure the steering wheel emblem returns to the upward position. Subject 2 Exam Notes: Before the exam: Bring your original ID card, avoid wearing slippers, high heels, or tinted sunglasses. During the exam: Quickly adjust your seat, rearview mirrors, and fasten your seatbelt upon entering the car. After all preparations are complete, verify your fingerprint and follow the voice prompts to enter the designated test area. If the vehicle stalls, ensure the gear is in neutral before restarting. For reverse parking, note that both front wheels must cross the dashed line before starting to reverse. If you fail the first attempt, you will proceed to a second attempt following the same process, using the same vehicle and test track, and you must re-verify your fingerprint.
4
2
Share

Which is faster, the Audi RS3 or RS6?

Audi RS3 and RS6 compared, the RS6 is faster. Power output of the Audi RS3: The Audi RS3 uses a 5-cylinder turbocharged engine with a maximum power of 294kW and a maximum torque of 480Nm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. Power output of the Audi RS6: The Audi RS6 is a high-performance version of a station wagon. In terms of power, this car is equipped with a 4.0T V8 twin-turbocharged engine with a maximum power of 412kW and a maximum torque of 700Nm.
5
2
Share

What is the reason for the failure to connect to Ora Bluetooth key?

It may be due to the Bluetooth device being connected to another device or the Bluetooth device being damaged. Below is a relevant introduction to the in-car Bluetooth system: 1. Introduction: The Bluetooth technology in the in-car Bluetooth system is an extension of mobile phone Bluetooth technology, sharing the same transmission system. 2. Function: The in-car Bluetooth is a wireless hands-free system designed and developed based on wireless Bluetooth technology for use inside the car. 3. Features: The function of the in-car Bluetooth is to automatically recognize mobile phones, allowing connection without the need for cables or phone holders; car owners can control their phones without touching them, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can conduct calls through the car's audio system.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.