What Causes the Black Screen on Lexus Display?

1 Answers
Dave
07/30/25 6:08am
Lexus display black screen may be caused by circuit failure or poor motherboard contact. Below are detailed explanations: 1. Circuit failure: The vehicle's central control system includes central door lock system, allowing drivers to control all door operations and window regulators. It also encompasses central console and audio control panel among other vehicle controllers. The central console LCD screen provides visual feedback when controls are activated. 2. Poor motherboard contact: Typical central display screens have multiple functions. Primarily the entertainment system, such as playing music when tired during driving. Voice navigation greatly assists travel, becoming an essential guide when visiting unfamiliar locations - convenient and user-friendly.
Was this review help?
14
2
Share
More Forum Discussions

What to Do When the Window Regulator is Broken?

Insert chopsticks wrapped with a towel into the glass guide channel. Move them up and down forcefully to clean the channel, and continuously wipe away the dirt cleaned off with the towel. Turn on the ignition switch, hold the switch up and keep it pressed. After the glass reaches the top, continue holding for more than 3 seconds to complete the initialization, and the window will restore its original function.
6
1
Share

How to align the timing belt on a Trumpchi GA3S?

Use a timing wheel clamp to secure the timing wheel disc, which effectively prevents the timing wheel shaft from getting stuck. Once the timing wheel shaft is stuck, it cannot be adjusted. Loosen the adjustment knob on the timing wheel shaft using a fine-tuning tool to facilitate subsequent timing adjustments. Align the timing wheel. Locate the colored chain on the timing wheel shaft. Rotate the colored chain found in the previous step until it aligns with the small dot on the timing wheel.
18
5
Share

What should be paid attention to when driving in rainy days?

Precautions for driving in rainy days are as follows: 1. Reduce speed and drive slowly: In severe weather conditions, strictly control the driving speed to allow yourself enough time to react. The adhesion between tires and the road decreases in rainy conditions, and tire grip becomes worse. Try to maintain low-speed driving, using second or third gear, with a speed not exceeding 30 or 40 kilometers per hour. When driving at high speed on highways with thin layers of water, the water film effect prevents the tires from directly contacting the road surface, causing the vehicle to slide and float, which can easily lead to loss of control. When stopping, decelerate about 100 meters in advance to give following vehicles time to prepare for an emergency. 2. Ensure clear visibility: Rainy conditions obstruct visibility, which can easily lead to road traffic accidents. Therefore, promptly turn on the windshield wipers and adjust the wiper speed according to the intensity of the rain to maintain good visibility. When the weather is dim, turn on the low beams, fog lights, and outline lights. If there is fog on the windows obstructing visibility, promptly turn on the air conditioning to disperse the fog. Keep the rearview mirrors clear. If the rearview mirrors or triangular windows become blurred due to rain, you can install rain guards or use professional "rain repellent," or turn on the rearview mirror heating function or add plastic sheets to shield from the rain. 3. Water wading skills: When passing under overpasses or waterlogged roads, do not rashly wade through water. Check the depth of the water before proceeding cautiously. When passing through waterlogged areas, shift to a low gear and proceed at a steady, slow speed. Do not shift gears, stop, or pass at high speed midway. If encountering muddy sections, drive along the ruts left by the vehicle in front. 4. Do not restart after stalling: When driving in rainy days, if the engine gets flooded, never attempt to restart the vehicle to avoid damaging the engine. If the vehicle stalls and cannot be started, the correct approach is to push the car from the low-lying area to a higher position as soon as possible, set up a danger warning sign, and call for rescue, waiting for help.
11
5
Share

How to Deal with Yellowed Headlight Covers?

Gently sand the cover with sandpaper, being careful to apply light pressure to avoid leaving scratches after cleaning. Sand the headlight with sandpaper and then polish it with specialized wax. However, not all areas can be polished, and the protective film will be worn off after polishing. First, apply tape around the edges of the headlight. Then, sand it with sandpaper of varying grits. Finally, use professional tools to apply a new protective film.
2
4
Share

How to Use an In-Car Memory Card?

Remove the SD card from the car. Generally, pressing the card will cause it to pop out, and then you can pull out the SD card. Prepare the SD card and insert it into the card reader. Connect the card reader to the computer via the USB port. The computer will recognize the drive letter, which is the drive letter of the memory card. Search for songs on the computer and download them. Make sure to know which music format the vehicle supports. After downloading, copy the music to the drive letter of the card reader. Eject the card reader from the computer, remove the SD card from the card reader, and insert it into the car to listen to music. Be careful not to insert the SD card upside down.
2
5
Share

What is the RPM when a car is running at 60 mph?

The normal RPM for a car running at 60 mph is between 1500-2000. RPM and Power: The engine RPM of a car is related to the number of work cycles per unit time or the effective power output of the engine, meaning the effective power of the engine varies with different RPMs. Therefore, when the engine has effective power, the car will have a corresponding matching RPM. When driving a manual transmission car, the gear should match the engine RPM and driving speed; during high-speed cruising, the highest gear should be used to reduce engine RPM, which helps improve fuel economy. RPM Increase: When there is a sudden increase in RPM, it indicates a mismatch with the actual power. At a certain speed, the ECU will provide an appropriate amount of fuel injection based on the collected data. The collected data is generally obtained through a comprehensive analysis of throttle opening, water temperature, intake, etc., to determine the correct fuel injection timing and amount.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.