What Causes the Black Screen of the Tire Pressure Monitoring Display?

1 Answers
DelMaggie
07/29/25 12:50pm
It is usually in normal standby mode or due to insufficient battery power. Here is additional information: 1. Tire Pressure Monitoring Device: The tire pressure monitoring device is a simpler tire pressure monitoring system that uses the existing sensing function of ABS to compare the rotation counts of the tires. A tire with insufficient pressure has a shorter circumference, so if one of the four tires has insufficient pressure, its rotation count will differ from the others while driving. 2. TPMS: TPMS is a real-time tire pressure monitoring system for automobiles, primarily used to automatically monitor tire pressure in real-time while driving, alerting to tire leaks and low pressure to ensure driving safety. It serves as a warning system to safeguard the lives of drivers and passengers.
Was this review help?
20
5
Share
More Forum Discussions

How to Open a Mercedes Car Key?

Method to open a Mercedes car key: 1. Push the buckle on the Mercedes car key upwards; 2. Pull out the mechanical key of the Mercedes car; 3. Use the mechanical key to forcefully push upwards and open along the gap of the mechanical key. Mercedes-Benz has models such as the Mercedes A-Class, E-Class, S-Class, and G-Class. Taking the Mercedes E-Class as an example: its exterior dimensions are 5078mm in length, 1860mm in width, 1484mm and 1490mm in height, with a body structure of a 4-door, 5-seater sedan. The Mercedes E-Class is equipped with a 1.5T turbocharged engine and a 2.0T turbocharged engine, paired with a 9-speed automatic transmission.
1
3
Share

How to Determine the Quality of a Radiator Cap

Methods to determine the quality of a radiator cap include: 1. Leakage; 2. Reduced circulation capacity; 3. Abnormal noises; 4. Idling issues; 5. Water pump leakage. An automobile radiator is primarily composed of a radiator core, water pipes, cooling air fins, an upper tank, and a lower tank. The automobile radiator, also known as a heat exchanger, is a key component in the vehicle's cooling system. Its function is to dissipate heat: the coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket in a continuous cycle, thereby achieving heat dissipation and temperature regulation. It is also an essential part of the automobile engine.
16
3
Share

Where is the OBD location of the Peugeot 307?

The OBD location of the Peugeot 307 is behind the panel on the lower left side of the driver's dashboard, and this panel is labeled with 'OBD'. If you see this panel, simply pull it out to access the car's OBD interface. OBD is a system that monitors the vehicle's operating status and promptly reports any abnormalities, primarily focusing on the engine condition and exhaust emissions. The Peugeot 307 is a model under Dongfeng Peugeot, with dimensions of 4249mm in length, 1786mm in width, and 1556mm in height, a wheelbase of 2608mm, equipped with a 5-speed manual transmission, and a top speed of 195 kilometers per hour.
20
3
Share

How to Increase Friction Between Car Tires and the Road Surface?

Creating tread patterns on the tire surface increases the roughness of the contact area, thereby enhancing friction. The principle is the same as wrapping chains around tires in snowy conditions. Additional tips: 1. Replace old tires: Over time, tires wear out, and when the treads are significantly worn, braking can cause skidding. Such tires have extremely low friction and should be replaced with new ones to improve traction. 2. Tire pressure: Tire pressure also affects friction. When tires are fully inflated, the contact area with the road is smaller compared to under-inflated tires. A smaller contact area results in less friction, and vice versa. Therefore, maintaining proper tire pressure is crucial.
2
4
Share

Will removing the roof trim cause water leakage?

Removing the roof trim will not cause water leakage. Below is relevant information about automotive sealing strips: 1. Function: Automotive sealing strips are designed to fill gaps between body components, providing sound insulation, waterproofing, and vibration damping. Made of rubber, these strips are prone to aging and hardening when exposed to prolonged sunlight. 2. Impact: The roof trim primarily serves a decorative purpose and does not have a waterproof function. Therefore, removing it will not result in water leakage. The main concern may be aesthetic, as some vehicle models have exposed weld points connecting the roof to the side panels, which might look odd without the trim. However, removing the sealing strip around a sunroof will definitely cause water leakage, as it serves a sealing function.
14
0
Share

Is the Geely Binyue 4-cylinder equipped with a dry dual-clutch transmission?

Geely Binyue 4-cylinder is equipped with a dry dual-clutch transmission. Taking the 2020 Binyue as an example, its body dimensions are: length 4330mm, width 1800mm, height 1609mm, wheelbase 2600mm, fuel tank capacity 45l, and curb weight 1310kg. The 2020 Binyue features a MacPherson strut front suspension and a torsion beam rear suspension. It is powered by a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 141ps, maximum power of 104kw, and maximum torque of 235nm, paired with a 6-speed manual transmission.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.