What causes the Baojun 730 to automatically lock?

1 Answers
AubreyFitz
07/30/25 8:27am
After turning off the engine and removing the key, but without remotely locking the doors, the doors will not automatically lock even after a long time. Here is some relevant information about the Baojun 730: 1. Powertrain: It is still equipped with the P-Tec DVVT 1.5T turbocharged engine, which delivers a maximum power of 150 horsepower (110 kW) at 5500 rpm and a peak torque of 230 Nm between 2000-3800 rpm. 2. Automatic LED headlights and rain-sensing wipers: The new Baojun 730 features square dual-lens LED automatic headlights with adjustable high and low beams, and wipers that automatically adjust their speed based on rainfall.
Was this review help?
2
0
Share
More Forum Discussions

How to Repair Scratches on Windshield Caused by Sandpaper?

Clean the glass thoroughly by using a clean cloth to remove dust and debris from the windshield. Wait for the glass to dry completely before starting the scratch repair process. Prepare a clean, lint-free cloth and dampen it with warm water. Wring out the cloth until it no longer drips. Squeeze a pea-sized amount of toothpaste onto the cloth. Be careful with the amount, as it is crucial. You can always add more if needed. Gently rub the scratched area of the glass with the toothpaste-covered cloth using small circular motions for about 30 seconds. Wipe the area again with the cloth. After wiping, the glass should appear shiny. Avoid pressing too hard or rubbing in circles when removing the toothpaste.
13
4
Share

How to Test if a Parking Sensor is Working Properly?

When you bring your ear close, you should hear a faint ticking sound. By comparing whether there are sounds and the volume of the sounds among several sensors, you can roughly determine which sensor has an issue. In actual repairs, you can use this blind spot to approach a specific sensor and block it with an object to determine if that particular sensor is faulty. When there is an issue with the parking sensor, if a sensor fails, it will emit a long intermittent "beep" sound to indicate that the left sensor has malfunctioned.
11
2
Share

How to Remove the Trunk Lid Trim Panel?

Locate the two clips next to the trim panel. The trim panel is secured to the door by screws and door clips. First, remove the screws that secure the door trim panel. Use a professional tool or a flat-head screwdriver to pry the edges. Except for the top of the trim panel, the other three sides are fixed by clips. Pry the clips outward to release them. After all the clips are pried open, lift the door trim panel upward to remove it. Then, detach the trim panel from the clips, allowing it to move freely.
4
3
Share

How to Deal with Mold in the Trunk?

Before parking, turn on the warm air mode of the air conditioner to dry out the moisture in the air conditioning ducts and the interior of the car, preventing the car environment from becoming too humid and causing mold. Place some activated bamboo charcoal in the car to absorb moisture and harmful substances, thereby regulating the humidity inside the car. Install a solar-powered air purifier or place a car air purifier in the vehicle to absorb dust and impurities in the air, preventing mold from forming inside the car.
6
2
Share

How to undergo the inspection for a deducted Class B driver's license?

Internet service platform, select the corresponding province or city, click "Personal Login" in the upper right corner, enter the relevant information as prompted, complete the login, and enter the personal homepage. Click "Full-score Inspection Education" --- "Inspection Education Application". Select "Online Learning for Inspection Education", follow the prompts to enter the learning interface, and complete the learning. Follow the prompts to complete the "Inspection Business Application". Click "Online Processing Progress" to check whether the transaction has been completed.
16
3
Share

How to Upgrade from B2 to A2 Driver's License?

After meeting all the requirements for upgrading to the corresponding driver's license, go to the vehicle management office to apply for the license upgrade procedure. Before going, you need to prepare the relevant materials. Undergo a physical examination at a qualified medical institution such as a secondary or higher-level hospital, township health center, community health service center, or health examination center, and obtain the physical examination report. Go to the service window of the vehicle management office, submit the relevant materials to the staff, and wait for the staff to review them before making the payment. First, participate in the relevant driver's license skill training, then schedule the exam, and after completing the exam, go to the license and certificate hall.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.