···
Log in / Register

What Causes the Bad Smell in the Vision X3 Air Conditioning?

3 Answers
EliasLynn
08/30/25 2:20am
Vision X3 air conditioning bad smell may be caused by the long-term failure to replace the car's air conditioning filter, leading to bacterial growth and odor. The following is an introduction to car air conditioning: 1. Car air conditioning is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car compartment to the optimal state, providing passengers with a comfortable riding environment and reducing travel fatigue; it also creates good working conditions for the driver and plays an important role in ensuring safe driving as a ventilation device. 2. The car air conditioning refrigeration system consists of a compressor, condenser, liquid storage dryer, expansion valve, evaporator, and blower, among others. These components are connected into a sealed system using copper pipes (or aluminum pipes) and high-pressure rubber hoses.
Was this review help?
17
5
Share
MacAllie
09/11/25 6:29am
I often encounter the issue of a foul smell in the Geely Vision X3's air conditioning system, mainly due to mold growth on the evaporator. When the AC is cooling, it condenses moisture, which accumulates on the evaporator and fosters mold, producing a smell similar to wet socks. Another issue is the air filter not being replaced for too long, as dust and debris build up and block airflow, causing odors. Additionally, if the drain pipe is clogged, water can't drain properly and stagnates in the system, breeding bacteria. This usually happens in humid weather or after infrequent AC use. I remember one time when I didn’t address it promptly, the smell grew stronger while driving, affecting my mood. To prevent this, it's recommended to regularly clean the AC internals during maintenance, such as using professional cleaning sprays on the evaporator or drying it with high airflow. Replacing the air filter every six months can also reduce odor sources. Neglecting this not only leads to unpleasant smells but may also cause allergy issues. Getting a thorough cleaning at a repair shop in time will save a lot of hassle.
Was this review help?
2
2
Share
Expand All
EverlyFitz
10/25/25 7:21am
The foul smell in the Geely Vision X3's air conditioning usually stems from mold on the evaporator or a dirty filter. When the AC cools, the evaporator gets damp, creating a breeding ground for bacteria that causes odors. A clogged filter also worsens the problem by trapping stale air. Drainage issues are another culprit—blocked tubes lead to stagnant water and bad smells. I recommend starting with simple fixes: check the filter and replace it if dirty. Then use cleaning foam on the evaporator or run the heater at high fan speed to dry it out. These steps can be done at home. If the issue persists, visit a 4S shop for a full system check. Regular maintenance is key—cleaning the AC quarterly prevents problems. Ignoring the smell degrades cabin air quality, harming health and driving comfort. Address it promptly to avoid bigger headaches later.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What is the difference between tire aspect ratios of 40 and 45?

The differences between tire aspect ratios of 40 and 45 are as follows: 1. Different aspect ratios: High aspect ratio tires have longer sidewalls and stronger cushioning ability, providing relatively higher comfort but poorer road feel and weaker lateral resistance during turns. Low aspect ratio tires with large inner diameters have shorter sidewalls and wider treads, resulting in larger contact areas and greater pressure-bearing capacity. They offer very sensitive road response, strong lateral resistance during turns, and excellent vehicle handling. 2. Different tire thickness: Tires with a 40 aspect ratio should be used on roads with good conditions to avoid bulges that may lead to blowouts. For 45 aspect ratio thin tires, it is advisable to drive on well-maintained roads as low aspect ratio thin tires will not affect tire performance under such conditions.
15
1
Share

Can vehicle electrical appliances be used when the ignition switch is in the ON position?

Vehicle electrical appliances can be used when the ignition switch is in the ON position. Introduction to car ignition switch positions: 1. LOCK: Locks the car. Generally, placing the key in this position locks the steering wheel, preventing significant movement. 2. ACC: Powers the entire vehicle, allowing normal use of the radio, lights, etc., but not the air conditioning. 3. ON: All basic equipment except the starter is on. This position unlocks the steering wheel and allows the use of air conditioning, but without cooling effect as the compressor is not activated—only the blower operates, producing natural airflow. During normal driving, the key remains in the ON position, with all vehicle circuits operational. 4. START: Starts the car, ignites the engine, consumes fuel, and activates the vehicle. The air conditioning begins cooling. The START position is for engine ignition; after starting, it automatically returns to the normal ON position.
14
1
Share

How to adjust the hot and cold air of the Mercedes-Benz air conditioner?

After pressing the AUTO button on the Mercedes-Benz, turn the temperature control knob to adjust the hot and cold air of the air conditioner. The following is an introduction to car air conditioning: 1. Introduction: The car air conditioning system is referred to as car air conditioning. It is used to adjust and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to the optimal state, providing passengers with a comfortable riding environment and reducing travel fatigue; it creates good working conditions for the driver and plays an important role in ensuring safe driving. Generally, it includes refrigeration devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car, has a simple structure, and is easy to operate, making it a popular modern car air conditioning system internationally. 2. Layout: Different types of air conditioning systems have different layout methods. Currently, integrated heating and cooling air conditioning systems are widely used in cars. The layout involves assembling components such as the evaporator, heater radiator, centrifugal blower, and control mechanism together, referred to as the air conditioning unit assembly.
12
5
Share

How to Activate Manual Mode in Tiptronic Transmission?

To activate the manual mode in a tiptronic transmission, release the accelerator while driving and shift the gear lever to the M position. Below are the operations for tiptronic transmission gears: 1. D is the drive gear, used for normal road driving; 2. R is the reverse gear, which can only be engaged after the car has come to a complete stop; 3. P is the parking gear, used when the vehicle is stationary and should be accompanied by engaging the handbrake; 4. L is the low gear, providing greater power output; 5. N is the neutral gear, used when the car is temporarily stopped; 6. W is the winter/snow gear, suitable for driving on slippery or snowy surfaces; 7. E is the economy gear, used on smooth road sections; 8. S is the sport gear, designed for highway driving.
12
4
Share

What Causes the ASR Light to Illuminate?

The reasons for the ASR light illuminating are as follows: 1. Maintenance-related: Tires have been repaired or removed. 2. Insufficient tire pressure: Low tire pressure or air leakage in the tire. 3. Icy road conditions: Encountering icy roads reduces the vehicle's grip, causing wheel slippage. 4. ABS system malfunction: If the vehicle has an ABS system malfunction, it may also cause the ASR light to illuminate. Below is relevant information: ASR is the Anti-Slip Regulation system, which prevents drive wheel slippage during acceleration and maintains the vehicle's directional stability. The illumination of the ASR light indicates a potential malfunction in the vehicle's traction control system. It is advisable to take the vehicle to a 4S shop for inspection as soon as possible. Such faults are usually caused by wiring issues and require the use of a fault diagnostic tool to identify the cause.
14
0
Share

What are the effects of a faulty rear oxygen sensor on a car?

Engine rear oxygen sensor failure can cause the engine malfunction light to illuminate, and may lead to symptoms such as vehicle shaking with jerking sensations, insufficient power, popping sounds from the exhaust, strong unpleasant odors, car jerking, slow acceleration, inability to reach speed, and increased fuel consumption. Working principle of rear oxygen sensor: The rear oxygen sensor detects the oxygen content in the purified exhaust gas and feeds this information back to the ECU. The computer then compares this data with that from the front oxygen sensor. If the data from the front and rear oxygen sensors are identical (normally the front oxygen sensor signal is greater than the rear), it can be determined that the three-way catalytic converter has failed.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.