···
Log in / Register

What Causes the Audi Cigarette Lighter to Have No Power?

3 Answers
LeBrooklyn
08/29/25 4:02am
Audi cigarette lighter has no power: mainly caused by a blown fuse of the cigarette lighter. You can locate the fuse box for the vehicle's electrical components, where spare fuses are available, and replace it. Below is relevant information about the cigarette lighter: 1. Function: Vehicles are equipped with cigarette lighters for the convenience of drivers. Although smoking in the car is discouraged, this feature is not removed. Some high-end cars even have an additional cigarette lighter in the rear for the convenience of backseat passengers. 2. Power voltage: The power voltage of the Audi Q5 cigarette lighter is 12 volts. Exceeding this value can easily overload the cigarette lighter, leading to various hazards such as burning out the lighter.
Was this review help?
14
4
Share
Ria
09/10/25 8:37am
Once when I was driving my Audi A4, the cigarette lighter suddenly stopped working, making it impossible to charge my phone, which was really frustrating. After checking the manual, I realized it might be a blown fuse because Audi cars have a dedicated fuse for the cigarette lighter circuit, which can be easily located in the fuse box. If it's damaged, the power will cut off. It could also be due to loose wiring connections, or too much dust buildup in the cigarette lighter socket causing poor contact. Another possibility is an issue with the vehicle's electrical system, such as low battery voltage or a weak alternator. I recommend first checking the fuse yourself by opening the fuse box—Audi's fuse box is usually located under the driver's seat. Use a small pair of pliers to pull it out and see if the fuse is broken. If replacing it doesn’t work, then it’s best to take the car to a repair shop for a full circuit inspection to avoid affecting other devices like the navigation system. Regularly cleaning the socket can also prevent problems, saving you the hassle of being unable to charge on the road.
Was this review help?
3
5
Share
Expand All
DiRonan
10/25/25 2:42am
As a technician with over a decade of car repair experience, I've encountered numerous cases of Audi cigarette lighters losing power. The most common issue is a blown fuse, especially when owners haphazardly connect multiple USB chargers, causing current overload and easy burnout. Next is wear or oxidation of the metal contacts inside the cigarette lighter socket, leading to power loss when contact fails. Then there are rear relay failures or main circuit short circuits—Audi's electrical layout is precise, and a single wire issue can shut down the entire cigarette lighter. During repairs, I first test the fuse and socket resistance, then inspect the entire vehicle's wiring if anomalies are found. Don't underestimate this small issue; fixing it early prevents major hazards, like circuit shorts potentially damaging the car's computer. I advise owners not to tough it out, keep a spare fuse for emergencies, and check before long trips for peace of mind.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

What does 'start' mean on a car button?

In cars, 'start' refers to the one-touch start, also known as the keyless ignition system. Here is some related information: Difference of one-touch start: The one-touch start is different from the traditional mechanical key ignition method and traditional starting procedure. Simply pressing the one-touch start button can achieve starting and turning off the engine, avoiding the trouble of losing or searching for keys. Most of the time, the brake pedal needs to be pressed during the ignition process. Introduction to one-touch start: The one-touch start device in cars is part of smart car technology, a button device that simplifies the ignition process. Cars with one-touch start functionality generally do not require inserting a key, but they still have a key slot. Its purpose is to allow for mechanical ignition in case the one-touch start function fails.
14
2
Share

How often should the Honda Vezel's fuel filter be replaced?

Vezel's fuel filter should be replaced every 30,000 kilometers. 1. The fuel filter, fully known as the fuel filter, is a type of fuel purifier. 2. It filters impurities from the fuel, providing clean fuel to the engine, and is an important automotive component that protects the engine and fuel supply system. During the production, storage, transportation, and use of gasoline, certain impurities such as iron oxide and dust are inevitably produced, or the quality of fuel from some gas stations may inherently be poor, containing a large amount of impurities. If these impurities are not filtered out and are brought into the engine and fuel supply system, they could damage the cylinders or cause the fuel injectors to clog. This necessitates the use of a fuel filter to remove impurities and ensure the vehicle operates normally.
10
0
Share

How to Determine Battery Quality?

You can judge the quality of a battery by observing the color changes of the battery indicator. Below is an introduction to batteries: 1. Basic Introduction: The main performance parameters of a battery include electromotive force, capacity, specific energy, and resistance. Electromotive force is equal to the work done by the non-electrostatic force when a unit positive charge moves from the negative electrode to the positive electrode inside the battery. 2. Battery Principle: In chemical batteries, the direct conversion of chemical energy into electrical energy is the result of spontaneous oxidation-reduction reactions occurring inside the battery. These reactions take place at the two electrodes. The negative electrode active material consists of reducing agents with a relatively negative potential that are stable in the electrolyte, such as reactive metals like zinc, cadmium, lead, and hydrogen or hydrocarbons. The positive electrode active material consists of oxidizing agents with a relatively positive potential that are stable in the electrolyte.
14
4
Share

What Wattage Motor is Compatible with Yuanqu 240?

Yuanqu 240 is compatible with a 1500W motor. More relevant information is as follows: Electric Motor: An electric motor consists of two basic parts, the stator (stationary part) and the rotor (rotating part), along with other accessories. The specific components may vary slightly depending on the type of motor. Stator: The stator is the stationary part of the motor. It is composed of three parts: the stator core, stator winding, and frame. The main function of the stator is to generate a rotating magnetic field, while the main function of the rotor is to be cut by the magnetic field lines and thereby generate (output) current. Rotor: According to ISO standards, a rotating body supported by bearings is called a rotor. Rotors are mostly the main rotating components in power machinery and working machinery. Typical rotors include turbine mechanical rotors, motor rotors, various pump rotors, and turbine compressor rotors, among others.
18
2
Share

What Causes Skoda Lighting Abnormalities?

Common causes of lighting abnormalities include bulb failure, fuse blowout, switch or relay damage, and circuit faults. During troubleshooting, the circuit should be inspected according to the wiring diagram to identify the faulty component. If multiple lights fail to illuminate: Press the horn - if it doesn't sound, the main fuse may have blown. If all bulbs on the same fuse circuit fail, the fuse may be blown. Before resetting the main fuse or replacing fuses, always investigate the cause of overload. Dim lighting is often caused by insufficient battery charge: Dim lighting is typically caused by low battery charge or alternator/regulator malfunction. Other potential causes include: loose or poor wire connections, undersized wiring or poor grounding, damaged diffusers or dirty reflectors, blackened bulb surfaces, insufficient wattage, or misaligned filaments not positioned at the reflector's focal point.
8
0
Share

What is the maximum speed limit on domestic highways?

The maximum speed on domestic highways must not exceed 120km/h, and the minimum speed must not be lower than 60km/h. Here are some precautions for driving on highways: 1. Use of turn signals: When a motor vehicle enters the highway from the ramp, the left turn signal should be turned on, and it should merge into the lane without hindering the normal driving of vehicles already on the highway. When a motor vehicle exits the highway, the right turn signal should be turned on, and it should enter the deceleration lane, reduce speed, and then exit. 2. Maintaining distance: When a motor vehicle is driving on the highway at a speed exceeding 100 kilometers per hour, it should maintain a distance of more than 100 meters from the vehicle in front in the same lane. When the speed is below 100 kilometers per hour, the distance from the vehicle in front in the same lane can be appropriately shortened, but the minimum distance must not be less than 50 meters.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.