···
Log in / Register

What Causes the Airbag Light to Illuminate in a Car?

1 Answers
VonCooper
07/28/25 9:09am
The reasons for the airbag light illuminating in a car include: 1. Engine self-check: The indicator light will turn on when starting the car, but it will go off after the self-check is completed, typically within about 5 seconds. This is a normal phenomenon. If it remains on, it indicates a fault. 2. False fault: If the battery is severely depleted, the airbag system may send a signal indicating low voltage for a specific airbag, generating a fault code. In this case, simply clearing the code will resolve the issue. 3. Actual fault: There are numerous potential causes for this, such as an airbag malfunction, clock spring failure, crash sensor fault, loose airbag connector, or circuit breakage. It is necessary to promptly use a diagnostic tool to read the fault code, locate the fault point based on the code, and address the issue accordingly.
Was this review help?
5
1
Share
More Forum Discussions

Where is the wiper of Mercedes-Benz e300?

The wiper control lever of Mercedes-Benz e300 is located on the lower left side of the steering wheel. How to use the wiper: By pushing the control lever up and down, you can control the wiper's wiping state (intermittent, off, auto, and high/low speed). If it is in the auto-adjustment state, you can change the sensitivity of the rain sensor wiper control by rotating the adjustment knob, thereby adjusting the wiper's wiping frequency. As for the front windshield washing, just gently pull the control lever toward the driver, and the windshield washer and wiper will work simultaneously. Precautions for using the wiper: If you find that the windshield washer fluid is not spraying out but the wiper is working, do not continue to press the button. At this time, you should check whether the windshield washer fluid warning light is on. If it is, you should replenish the windshield washer fluid in time.
9
5
Share

Differences Between Song Pro DM and Song DM?

Song DM and Song Pro DM mainly differ in interior features such as the steering wheel. Introduction to Song DM: The Song DM has an additional row of cruise control buttons on the right side of the steering wheel, which the Song Pro DM integrates into the left side, making the multifunction buttons more compact and refined. Both models feature a 12.8-inch rotating central control screen, but the Song Pro DM tilts it 7 degrees toward the driver for easier and safer operation. Introduction to the New Song Pro DM: The new Song Pro DM adopts the Dragon Face 2.0 design concept, using numerous straight lines to enhance the vehicle's visual impact, giving it a presence comparable to German SUV models. The spacious and elegant side profile provides a stable visual effect. In terms of dimensions, the new Song Pro DM measures 4650/1860/1700 mm in length, width, and height, with a wheelbase of 2712 mm, offering a more spacious interior.
4
5
Share

Does the Nissan Navara Dark Sky Edition have an automatic transmission?

Nissan Navara Dark Sky Edition has an automatic transmission. Automatic transmission principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume 10% more fuel than manual transmissions. Whether manual or automatic, the more gears the transmission has, the more fuel-efficient it is. Automatic transmission driving tips: For manual transmission vehicles, higher RPMs should be used when shifting up. Engines are designed to operate at higher RPMs, with various components' dynamic balance and rotational inertia parameters optimized for high-speed operation. Prolonged operation at non-optimal RPMs increases internal component load and wear, often leading to vibration and knocking, which can affect engine lifespan. Using 3000 RPM as the shift-up point ensures post-shift RPMs remain around 2300, keeping the engine within its optimal operating range.
19
3
Share

What Causes Jerking Sensation at Low Speeds in Automatic Transmission Cars?

Automatic transmission cars may experience jerking sensations at low speeds due to the following reasons: 1. Internal clutch pressure leakage in the transmission; 2. Blockage or poor flow in the transmission oil passages; 3. Incorrect transmission fluid level - both insufficient and excessive fluid can cause this issue. Vehicles equipped with a transmission dipstick can check whether the fluid level falls within the standard range when the engine is running; 4. Damaged solenoid valve. Automatic transmission typically refers to a vehicle's automatic gear-shifting mechanism, where the transmission control system automatically selects the appropriate gear based on engine speed and load during driving, replacing the driver's manual judgment and shifting operations. Most automatic transmission cars have six gear positions, arranged from top to bottom as: P, R, N, D, S, and L.
13
1
Share

How often should the brake discs of a Mercedes-Benz C200 be replaced?

The brake discs of a Mercedes-Benz C200 should be replaced every 100,000 kilometers. Brake pad lifespan: Under normal driving conditions, the front brake pads of most vehicles last between 30,000 to 50,000 kilometers, while the rear brake pads last between 120,000 to 150,000 kilometers. The exact replacement time depends on the specific wear condition. The mileage specified by manufacturers may vary for different vehicle models. Brake pad replacement precautions: When replacing brake pads, choose products from reputable manufacturers. Typically, brake pads produced by reputable manufacturers have clear packaging prints, including license numbers, specified friction coefficients, and execution standards. The packaging box should also contain a certificate of compliance, production batch number, and production date. It is recommended to have new brake pads installed by professionals at a specialized repair shop to avoid errors that could lead to potential safety hazards. Checking brake pad condition: When inspecting brake pads, it is also necessary to check the wear of the brake discs or drums to ensure sufficient contact area with the brake pads for improved braking force.
2
4
Share

Does Turning the Steering Wheel While Braking Stationary Damage the Car?

Turning the steering wheel while braking stationary can indeed damage the car, with specific impacts including: 1. Accelerated wear on the front tires. For most vehicles, the front wheels serve as both steering and driving wheels, naturally experiencing more wear than the rear wheels. Frequent stationary steering can hasten front tire wear, increasing driving safety risks. 2. Damage to the power steering mechanism, increasing its workload and accelerating aging and wear. When a car turns the steering wheel while stationary, the wheels do not rotate around the tire's center point like a bicycle turning. Instead, they perform a circular motion around the steering knuckle's axis. In this state, the wheel's movement resembles pushing a millstone. If the brake is applied while turning the steering wheel stationary, the wheels cannot rotate on their own and are forced to skid on the ground, placing significant impact on the steering system and suspension.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.