What causes the acceleration vibration in the 2017 Cadillac ATS-L?

What is the function of anti-skid control?

Anti-skid control system, represented by a car icon with two inverted wavy lines (similar to a reversed letter S) on the vehicle, has different proprietary names across manufacturers. For instance, Volkswagen calls it ESP, Toyota uses VSC, and Honda refers to it as VSA. The function of anti-skid control: When the vehicle becomes extremely unstable (such as during sharp turns or lane changes), it compensates for vehicle stability by applying wheel brakes or controlling engine torque, correcting the instability of the car body to help prevent accidents. The simplest example: When braking hard on icy roads, the vehicle is very prone to skidding, and the anti-skid control system can solve this problem.

16

3

Share

Will there be penalties for not registering a motorcycle's color change?

If a motorcycle's color change is not registered and is discovered, a fine of 200 yuan will be imposed without any deduction of points. According to Article 56 of the "Regulations on the Registration of Motor Vehicles," if the body color is changed without going through the required registration procedures, the traffic management department of the public security organ will issue a warning or impose a fine. The vehicle may also be impounded and required to revert to its original color. To apply for a change in the body color of a motor vehicle, the following documents must be submitted in accordance with the "Road Traffic Safety Law": "Application Form for Modification of Motor Vehicle Registration." Identity proofs of the motor vehicle owner and the agent. The motor vehicle registration certificate. The motor vehicle license. According to Article 6, Chapter 2 of the "Road Traffic Safety Law," if the color change area of a motor vehicle does not exceed 30%, no modification registration is required. Conversely, if it exceeds 30%, it must be registered and filed within 10 days after the color change. Precautions for vehicle color change: Before changing the color of a motor vehicle, it is necessary to consult the vehicle management office where the vehicle is registered to determine whether the local area permits the use of film to change the vehicle color. If the region does not support this method, the modification cannot be registered, and the film must be completely removed to restore the vehicle's original color. Additionally, according to the "Regulations on the Registration of Motor Vehicles," owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply to the vehicle management office for modification registration. According to Article 10, registered motor vehicles must apply for modification registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Whole vehicle replacement due to quality issues. Change of use nature, such as converting a commercial vehicle to a non-commercial vehicle or vice versa. The motor vehicle owner's residence moves out of or into the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with emblem patterns and equipped with alarms and signal lights as required. Other motor vehicles are not allowed to paint, install, or use emblem patterns, alarms, or signal lights that are exclusive to or similar to those of the aforementioned vehicles.

12

4

Share

What color is the X-Trail brake light wire?

X-Trail brake light wire is red. The X-Trail brake light model is T20. Brake lights are generally installed at the rear of the vehicle, with the main body color being red, to enhance the penetration of the light source. This ensures that vehicles behind can easily detect when the vehicle in front is braking, even in low visibility conditions, thereby helping to prevent rear-end collisions. The method for removing and replacing the brake light is as follows: 1. Use a cross-head screwdriver or socket to remove the bolts; 2. Pull the lamp assembly out from the rear pillar; 3. Turn the socket counterclockwise and remove it; 4. Remove the old bulb and insert the new one.

11

0

Share

What is the oil specification for the Yaris L?

Toyota Yaris L's original factory oil specification is 5W30 semi-synthetic oil. Engine oils are divided into three categories, with the differences as follows: 1. Mineral oil: A commonly used lubricant in the market. Essentially, it utilizes the inferior components of crude oil. Mineral oil is inexpensive, but its service life and lubricating performance are inferior to synthetic oil, and it also causes significant environmental pollution. Additionally, mineral oil cannot completely remove impurities during the refining process, resulting in a higher pour point, making it unsuitable for use in extreme cold conditions. 2. Semi-synthetic oil: A product refined from mineral oil through hydrocracking technology. It is a mixture of mineral oil and full synthetic oil in a 4:6 ratio. The purity of semi-synthetic oil is very close to that of full synthetic oil, but its cost is slightly higher than mineral oil, making it an ideal transitional product from mineral oil to synthetic oil. 3. Full synthetic oil: Full synthetic oil is the highest-grade oil among engine oils. It is derived from ethylene and propylene dispersed from natural gas or crude oil gas, which are then polymerized and catalyzed through complex chemical reactions to form a lubricating fluid composed of large molecules. Essentially, it uses the superior components of crude oil, undergoes chemical reactions, and achieves the desired molecular structure under human control. Full synthetic oil has neatly arranged molecules, strong resistance to external variables, excellent thermal stability, oxidation resistance, and viscosity change resistance compared to mineral and semi-synthetic oils, but it is also the most expensive.

18

1

Share

What is the Difference Between 1.5L and 1.8L Displacement?

1.5L and 1.8L displacement have the following differences: 1. Different fuel consumption: The 1.5L displacement has relatively lower fuel consumption, while the 1.8L displacement has higher fuel consumption. 2. Different power output: The 1.5L displacement provides relatively smoother power, whereas the 1.8L displacement delivers stronger power. Displacement is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Most domestically produced passenger cars have a model designation consisting of pinyin letters and Arabic numerals at the rear, which includes the following three parts: The first part consists of 2 or 3 pinyin letters, serving as the code to identify the manufacturer's name. For example, CA behind Hongqi sedans represents FAW, and QC behind Flyer sedans represents Qinchuan. The second part, following the pinyin letters, usually includes 4 Arabic numerals. For passenger cars, the first digit on the left is 7, and the middle two digits indicate the engine displacement of that model. For instance, 15 denotes an engine displacement of 1.5 liters, and 18 denotes 1.8 liters. After the digits representing displacement, there is an additional digit indicating the manufacturer's self-defined product sequence number.

19

0

Share

How to Deal with AFS Malfunction in Adaptive Headlights?

Adaptive headlights, also known as Adaptive Front-lighting System (AFS), can automatically adjust the deflection of the headlights based on driving speed and steering angle to illuminate the turning area in advance, providing comprehensive safety lighting. This ensures the driver has optimal visibility at all times, thereby enhancing driving safety in the dark. Below are the steps to handle AFS malfunction in adaptive headlights: 1. Check if the bulbs or sensors under the chassis are waterlogged or damaged. 2. Inspect the headlight control unit for water ingress, which is a common cause of adaptive headlight failure. 3. If everything appears normal, visit a 4S shop to diagnose and resolve the issue by checking the fault codes.

5

Share

What causes the acceleration vibration in the 2017 Cadillac ATS-L?

What is the function of anti-skid control?

Will there be penalties for not registering a motorcycle's color change?

What color is the X-Trail brake light wire?

What is the oil specification for the Yaris L?

What is the Difference Between 1.5L and 1.8L Displacement?

How to Deal with AFS Malfunction in Adaptive Headlights?

What is the brand of motorcycles used by the National Honor Guard?

How to set up the automatic downward tilt of the rearview mirror when reversing in the Tiguan L?

What Are the Causes of Car Body Shaking?

Where is the USB port of the Mercedes-Benz GLC260?